CORSAIR RMx SHIFT seeria täielikult modulaarsed toiteplokid uhkeldavad revolutsioonilise patendi ootel küljel asuva kaabliühendusega, hoides kõik ühendused mugavalt käeulatuses, pakkudes erakordselt mugavat 80 PLUS Gold efektiivset energiat.
Super kompaktes Flex-ATX-Netzteil, mit 500 Watt Leistung, 80 PLUS Gold zertifiziert, starke 12-V-Single-Rail mit 41,67 Ampere, 2x 6+2-Pin-PCIe / 4x SATA / 3x Molex
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 12 Number of power supply connector 4-pin 12V: 0 8-pin 12V power connectors: 1 Number of power supply connector 4+4-pin 12V: 1 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 6 PCI-E 8-pin power connectors: 0
The Lian Li EDGE 80 PLUS Platinum Power Supply is a high-performance PSU designed for demanding systems. With 1300 watts of power, it supports PCIe 5.1 and ATX 3.1 standards, ensuring compatibility with the latest components. This power supply is 80 PLUS Platinum certified, offering exceptional energy efficiency. L-Shape design for dual chamber case 80 PLUS Platinum Efficiency Built-in USB expantion hub with 4 internal USB 2.0 headers Integrating German EPCOS bulk capacitors In-house R&D 12V-2×6 alloy copper soldered terminals ATX 3.0/3.1 compliant PSU Full modular sleeved cable with cable comb MB/CPU/GPU connectorsINNOVATIVE L-SHAPE DESIGN Engineered specifically for dual-chamber chassis such as the LIAN LI O11 series, the EDGE PSU’s L-shape design is ideal for vertical installation at the second chamber.This unique form factor reorients the connectors outward, simplifying cable management and ensuring a clean, organized build.POWER AND USB HUB TWO-IN-ONE The full Edge Series integrates 4 × 9-pin internal USB expansion, which function as a 1-to-7 USB hub, simplifying the connection of USB devices such as UNI fans, Strimer Plus, and RGB controllers to the motherboard. All USB ports features uninterruptible power, allowing connected devices to remain operational when the PC is turned off, as long as the power supply is on. Each port supports a rate current of 500mA.1. CONNECT TO USB DEVICESPort #1 provides 1 USB signal, while port#2/3/4 each provide 2 USB signals. This allows for up to 7 USB devices when using a 1-to-2 splitter cable at port #2/3/4 .Note: Due to the TL controller’s 2-in-1 USB design to support both TL LCD and TL, it is recommended to connect it to port#2/3/4. Other LIAN LI or third-party controllers can be connected to any port.2. CONNECT TO MOTHERBOARD Offers two options for motherboard signal connection to accommodate different configurations.STANDARD INTERNAL USB CONNECTOR Connect to the motherboard in the main chamberUSB TYPE A CONNECTOR Connect to the rear IO of the motherboardPLATINUM CERTIFIED Achieving the 80 PLUS, Cybenetics and PPLP Platinum certifications, the EDGE Series ensures top-tier energy efficiency, reducing power consumption and heat output while delivering reliable, stable performance.ATX 3.0 AND 3.1 COMPLIANT Fully compliant with ATX 3.0 and 3.1 standards, the EDGE Series meets the latest power supply specifications, ensuring compatibility with the newest components and motherboards.STABLE DUAL COLOR PCIE5.1 CONNECTOR LIAN LI’s in-house R&D developed 12V-2×6 alloy copper soldered terminals for secure and efficient power delivery, enhancing system stability and performance. Dual-color shell for confirming secure connectionsAdded gold plating to prevent short circuitsSoldered wire and terminal connection for current stabilityIncreased copper thickness to 0.25mm for lower contact resistance INDUSTRIAL GRADE CAPACITORS The EDGE PSU integrates the German EPCOS capacitors, offering compact, robust performance with higher tolerance to temperature and harsh environments. Featuring LLC topology and Active PFC, the EDGE PSU enhances efficiency, reduces heat generation, and ensures cleaner, more reliable power delivery.COOL IN SILENCE Designed for optimal performance, the open style mesh facilitates excellent heat dissipation for internal components. This feature is especially beneficial for the 120 MM PWM fan, which operates efficiently with minimal noise, ensuring the system stays cool and quiet even under heavy loads.Edge 1300W Fan Acoustic Noise (Ambiance temperature 25℃)PREMIUM BRAIDED SLEEVED CABLES FOR A CLEAN BUILD The power supply units come equipped with 20+4pin, CPU, PCIe 6+2pin, and 12V-2×6 cables featuring premium braided sleeves. These cables are designed with easy-to-adjust cable combs, ensuring very clean curves and cable runs for an aesthetically pleasing and organized dual chamber build.Comprehensive SATA Power Solutions Included with the EDGE PSU series are several SATA power cables to suit various needs: Y-Type SATA Cable: Perfect for connecting drives and controllers located in different areas, providing flexibility and reducing cable clutter.Close-Type SATA Cable: A 300mm long cable with 15mm spacing between power connectors, making it easy to attach devices while maintaining a tidy setup.Note: Please do not connect 850W or 1000W cables to a 1300W power supply unit. Using incompatible cables can lead to serious damage to your components and may void your warranty.COMPREHENSIVE CONNECTORS The modular cables are measured precisely for the dual chamber chassis to avoid bulkiness and ensure efficient cable management.10 YEARS WARRANTY EDGE series are crafted with high-quality materials for superior performance and longevity. Enjoy peace of mind with our extensive 10-year warranty.
DarkFlash EMT650 computer power supply (black)The DarkFlash EMT650 power supply is a 650 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 54 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 86.96%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 86.96% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation area and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT650 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT650 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT650 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT650ColorBlackTotal power650 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver voltage protection (OVP), overload protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash EMT850 computer power supply (black)The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT850ColorBlackTotal power850 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
Product kirjeldus: AeroCool KCAS PLUS GOLD - toiteplokk - 750 vatti seadme tüüp: toiteplokk - active Power Factor Correction (PFC) - internal Specification Compliance: ATX12V 2.52 80 PLUS Certification: 80 PLUS Gold sisendpinge: AC 100-240 V väljundpinge: +3.3, +5, ±12 V Power maht: 750 vatti Output Ühendusi: 1 x power 24 pin ATX koos eemaldatav 4 pin section 2 x power 8 pin +12V koos eemaldatav 4 pin section 3 x 8 pin PCI Express power koos eemaldatav 2 pin section 4 x 4 PIN internal power 8 x 15 pin Serial ATA power Jahutussüsteem: 120 mm fan Manufacturer Warranty: 2-year garantii
Fanless design for completely silent operation, digital monitoring via MasterCTRL software, ATX 3.1 & PCIe 5.0 ready including 12V-2x6 cable, fully modular cable management for optimal organization The X Silent Edge Platinum 850 is a high-end power supply from Cooler Master that uncompromisingly focuses on silent performance. Thanks to its completely passive cooling, it is ideal for particularly noise-sensitive setups—from silent PCs to workstations. Completely fanless design prevents dust buildup and ensures absolute silence. Patented cooling concept with heat pipe technology and aluminum mold for efficient heat dissipation. Digital control unit with real-time monitoring via MasterCTRL software—including temperature and efficiency display. Supports ATX 3.1 standard and provides a PCIe 5.0-compliant 12V 2x6 cable—ideal for modern GPUs. Fully modular cable design ensures optimal airflow conditions and a tidy setup. Silent performance for enthusiasts With its innovative cooling architecture, the X Silent Edge completely forgoes active ventilation—even under heavy load, it remains passively cooled. This makes it perfect for users who value maximum efficiency and absolute silence. Innovative cooling technology The in-house aluminum heat mold combined with the copper heat pipe distributes generated heat evenly. This extends the lifespan of the components and keeps temperatures stably low even at 850 W output. Digital control & modern standards Through integrated microcontrollers, the power supply can be monitored via MasterCTRL software. It meets ATX 3.1 and provides all necessary cables for current GPU generations—including a dual 12V 2x6 interface for PCIe 5.1.
High-performance SilverStone power supply with PCIe 5.0, 80 PLUS Gold, 750 watts of power, modular cable management, and 12VHPWR connector for high-end graphics cards
