Toiteallikad

CHIEFTEC SMART TFX 400W 80+Bronze ATX 12V 2.3 PSU

Powerful fully modular ATX-3.1 power supply from Montech850W rated power for your high-end components80-PLUS and Cybernetics Platinum certificate for absolute efficiency1x 12VHPWR connection for high-end graphics cardsFan with fluid dynamic bearingMontech Titan PLA: ATX-3.1 Power Supply for Your Gaming PCThe Montech Titan PLA provides you with 850W rated power, more than enough to power even the most powerful gaming hardware. In particular, PCIe 5.1 support ensures better security and performance for your graphics card.Additionally, the power supply has an 80-PLUS and Cybernetics Platinum certificate. At 50% load, it achieves an efficiency of up to 90%. This leads to less heat, less fan noise, and significantly higher reliability.Optimal CoolingThe ATX form factor allows for installation in most cases. Inside, there is a 135-mm fan with a fluid dynamic bearing, ensuring long life while generating lower noise levels.Connection OptionsOn the back of the power supply, you will find all the necessary connections for your hardware components. These include connections for powering the motherboard, CPU, and graphics card.

Powerful fully modular ATX 3.1 power supply from Montech 750 watts nominal power for your high-end components 80 PLUS and Cybernetics Platinum certification for absolute efficiency 1x 12VHPWR connector for high-end graphics cards Fan with fluid dynamic bearing Montech Titan PLA: ATX 3.1 power supply for your gaming PC The Montech Titan PLA provides you with more than enough power with its 750 watts nominal power to supply even the most powerful gaming hardware. In particular, the PCIe 5.1 support ensures greater safety and performance for your graphics card. Additionally, the power supply has an 80 PLUS and Cybernetics Platinum certification. At a load of 50%, it achieves an efficiency of up to 90%. This results in less heat, less fan noise, and significantly higher reliability. Optimal Cooling The ATX form factor allows for installation in most cases. Inside, there is a 135mm fan with a fluid dynamic bearing, which impresses with its long lifespan and low noise level. Connection Options On the back of the power supply, you will find the essential connections you need for your hardware components. These include connections for powering the motherboard, CPU, and graphics card.

Powerful fully modular ATX-3.1 power supply from Montech1,200W rated power for your high-end components80-PLUS and Cybernetics Platinum certificate for absolute efficiency1x 12VHPWR connection for high-end graphics cardsFan with fluid dynamic bearingMontech Titan PLA: ATX-3.1 Power Supply for Your Gaming PCThe Montech Titan PLA provides you with 1,200W rated power, more than enough to supply even the most powerful gaming hardware with power. In particular, PCIe 5.1 support provides more security and performance for your graphics card.Additionally, the power supply has an 80-PLUS and Cybernetics Platinum certificate. At 50% load, it achieves an efficiency of up to 90%. This leads to less heat, less fan noise, and significantly higher reliability.Optimal CoolingThe ATX form factor allows for installation in most cases. Inside, there is a 135-mm fan with a fluid dynamic bearing, ensuring long life while generating lower noise levels.Connection OptionsOn the back of the power supply, you will find all the necessary connections needed for your hardware components. These include connections for powering the motherboard, CPU, and graphics card.

White Shark CAPTAIN-3

GIGABYTE P650SS ICE + Ice white aesthetics + 80 PLUS Silver certified (230V EU) + Support Intel ATX 3.0 standard + 120mm Fluid Dynamic Bearing (FDB) Fan + Flat cable design + Powerful single +12V rail + OVP/OPP/SCP/UVP/OCP/OTP protection 80 PLUS SILVER CERTIFIED The 80 Plus Silver certification (230V EU) guarantees a 90% efficiency rate at a 50% load, resulting in reduced power wastage, diminished heat generation, and minimized fan noise. Support Intel ATX 3.0 standard The P650SS ICE can sustain up to 2x total power excursion. It is fully compatible with Intel PSDG (Power Supply Design Guide) ATX 3.0 standard which supports up to 200% power excursion, reaches 70% low load efficiency and complies with required power supply timing standards. 120MM FLUID DYNAMIC BEARING(FDB) FAN High-performance Fluid Dynamic Bearing fan uses oil film shock absorption technology to effectively reduce noise, making it quieter than conventional sleeve fan and providing more than twice the lifespan. In addition, the fan will detect the current power usage and temperature, automatically adjust the fan speed to minimize the noise. RELIABLE FLAT CABLE DESIGN The utilization of flat cables minimizes clutter while enhancing the thermal performance of the chassis. PROTECTION To guarantee the stable operation of your entire computer system under any circumstances, we have incorporated a range of protective features including OCP, OTP, OVP, OPP, UVP, and SCP. Moreover, we have obtained safety certifications from various countries to ensure the consistent and secure functioning of your system.

Asrock Power supply PG-1000G 1000W 80PLUS kuldne full modular

Inter-Tech Argus 600AA2 - ATX - 2U rack - 80 PLUS Gold - 600 Watt - 80mm rear mounted fan

The PHANTEKS AMP GH V2 1000W is a high-performance ATX 3.1 power supply designed for demanding gaming PCs, offering reliable 1,000-watt power delivery. Featuring 80 PLUS Platinum certification, it achieves up to 94% efficiency for energy-saving operation. The PSU uses a quiet 120 mm fan with a hydrodynamic bearing for optimal cooling, while the fully modular design and individually textured cables help reduce cable clutter and improve airflow. Its semi-passive hybrid mode enables silent operation at the press of a button. Equipped with a 12V-2x6 power cable for powerful graphics cards and gold-plated connectors, it supports the latest PCIe 5.1 standard and ensures efficient, flexible, and tidy system builds.

SilverStone HELA 2500Rz - Strømforsyning (intern) - ATX12V 3.1/ EPS12V - Cybenetics Platinum - AC 200-240 V - 2500 Watt - aktiv PFC - sort

Powerful 850-watt power supply, with 80 PLUS Platinum efficiency, ATX 3.1 & PCIe 5.1 support, zero-RPM fan mode, modular The Lian Li SX Series 850 W power supply is perfect for anyone building a high-performance gaming PC or workstation. With up to 850 watts, it delivers enough power for high-end processors, modern graphics cards, and extensive cooling systems. Thanks to the 120 mm fan with Zero-RPM mode, the power supply remains quiet when your system is under low load. The fully modular design also ensures a tidy interior – you only connect the cables you really need. 850 watts power: Ideal for high-end PCs with powerful hardware 80 PLUS Platinum efficiency: Up to 92% efficiency at half load Fully modular design: Includes flexible, sleeved cables ATX 3.1 & PCIe 5.1 standard: Future-proof and GPU compatible Quiet operation: 120 mm fan with Zero-RPM mode Lian Li SX Platinum: Maximum performance for modern hardware The Lian Li SX Series 850 W reliably powers even high-end components. It supports current AMD and Intel processors as well as large graphics cards like the RTX 5000 series. Thanks to ATX 3.1 and PCIe 5.1 compatibility, it is also well prepared for upcoming hardware generations. The power supply also offers a native 12V 2x6 connector for modern GPUs – no adapter needed. High efficiency & quiet operation Inside, high-quality Japanese capacitors ensure stable power delivery and long lifespan. With an efficiency of up to 92%, the power supply is especially energy-saving. The 120 mm FDB fan runs up to 2,000 rpm under heavy load and keeps temperatures cool. At low load, it automatically switches to Zero-RPM mode – for completely silent operation. Clean cable management thanks to modular design The Lian Li SX Series offers fully modular connectors. You only connect the cables you really need – keeping your system tidy and airflow unobstructed. The included braided cables are flexible and easy to route. The 12V 2x6 connector has a two-colour marking that shows when the connection is securely latched. So you can be sure the plug is properly seated. Safe & durable For maximum safety, the power supply protects your system with multiple protection features such as overvoltage, overload, short circuit, and no-load protection. This keeps your hardware permanently safe.

DarkFlash EMT650 computer power supply (black)The DarkFlash EMT650 power supply is a 650 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 54 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 86.96%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 86.96% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation area and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT650 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT650 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT650 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT650ColorBlackTotal power650 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver voltage protection (OVP), overload protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD

DarkFlash EMT850 computer power supply (black)The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT850ColorBlackTotal power850 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD

DarkFlash PMT1050 computer power supply (white)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorWhiteTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDWhite computer power supply on a dark background with yellow stripesWhite DarkFlash power supply with marked ports on a dark background

DarkFlash EMT750 computer power supply (black)The DarkFlash EMT750 power supply is a 750 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 62 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.28%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.28% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT750 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT750 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT750 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT750ColorBlackTotal power750 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD

DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD

Codegen toiteplokk ATX PSU 400W V2.03 P4 CE PFC PSU (SILENT/ 12cm fan)

CHIEFTEC BDF 850W CM 80PLUS Bronze PFC

Applied Models: RS812RP+, RS814RP+, RS815RP+Koguvõimsus250 WOtstarveServerÜhilduvusRS812RP+, RS814RP+, RS815RP+Toote värvHallLaius230 mmSügavus72 mmKõrgus39 mmKaal700 g

Leises schwarzes 500-Watt-Netzteil der Strider Essential Series (80 PLUS) mit 34-A-Single-Rail, 2x PCIe und 120-mm-Lüfter

MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2

AKYGA Tootegrupp: korpuste toiteplokk toiteploki tüüp: Standard toiteploki võimsus: 500 vatti formaat: ATX toiteploki standard (ATX): 2,31 PFC (võimsusteguri korrigeerimine) tüüp: active Tavaline aeg rikke esinemisel (MTBF): 100000 tundi Number of electric plugs 4-pin (HDD/ODD): 2 tk Number of electric plugs 4-pin (FDD): 1 tk elektripesade pistikuid Serial ATA: 6 tk elektripesade pistikuid 6-pin (PCI-E): 1 tk elektripesade pistikuid 6+2-pin (PCI-E): 1 tk elektripesade pistikuid 8-pin (PCI-E): 0 tk Number of electric plugs 3-pin (FAN): 0 tk elektripesade pistikuid 4-pin (FAN): 0 tk +12V elektripesa tüüp: EPS12V Number of electric plugs +12V 4-pin (P4): 0 tk elektripesade pistikuid +12V 4+4-pin (EPS12V): 1 tk elektripesade pistikuid +12V 8-pin (EPS12V): 0 tk ATX toiteploki ühenduspesa tüüp: 20-pin + 4-pin ventilaatorite arv: 1 tk Fan's size class: 120 mm ventilaatori müratase: andmed puuduvad ventilaatori pöörlemiskiiruse kontroll: Automatic Illumination (värv): andmed puuduvad kaitsed: OVP (ülepinge kaitse), OCP (liigvoolukaitse), OPP (ülevõimsuskaitse), OTP (ülekuumenemise kaitse), SCP (lühisekaitse), UVP (Under pinge Protection) sertifikaadid: CE, RoHS, 80 PLUS pronks laius: 140 mm sügavus: 150 mm kõrgus: 85 mm Netokaal: 1.26 kg värv: must Lisaandmed: 1.5m toitejuhe included

Toiteallikas 24V, 2,2A, 50W

Impulss toide 12V, 4,2A, 50W

Impulss toide 24V, 3,2A, 75W.

AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 24VDC 1,5A juures; Pass LPS Ülimalt õhuke: ainult 35 mm lai Universaalne vahelduvvoolu sisend Koormuseta energiatarbimine

AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 24VDC 6,25A juures.Madala profiiliga astmeline esiosa Universaalne vahelduvvoolu sisend: Reguleeritav väljundpinge Kaitsmed: 85~264VAC Madal "koormuseta" energiatarbimine Reguleeritav väljundpinge: Lühiseade, ülekoormus ja ülepinge.

AC-DC Ultra slim DIN rail power supply; Input range 85-264VAC; Output 12VDC at 1.25A; Pass LPS

AC-DC Single output LED Driver Constant Voltage (C.V.); Input 180-305Vac; Output 12Vdc at 10A

Fan 120mm, 1500rpm, Volume 13.80-31.20dB (A) (manufacturer), 27.86dB (A) (Cybenetics, 230V), Cable management firmly, Connections 1x 20/24 pin, 1x 4/8 pin ATX12V, 2x 6/8 pin PCIe, 6x SATA, 3x IDE, Average efficiency 85% (manufacturer), 87% (80 PLUS, 230V EU), 87.7% (Cybenetics, 230V), Certificates 80 PLUS (230V EU), LAMBDA-A- (230V), Dimensions (WxHxD) 150x86x140mm, Number of 12V rails 1, + 3.3V 17A, + 5V 17A, + 12V 45A, -12V 0.3A, + 5Vsb 3A, PFC active, Form factor ATX PS / 2, Special features ErP Lot 6, MPE-5501-ACABW-BEU

Leistungsstarkes 750-Watt-Netzteil, hohe Effizienz durch 80 PLUS Gold-Zertifikat, starke Singlerail mit 62 A, innovatives CONNECT-Modul für die Anschlusskabel, modulares Kabelmanagement mit flachen Kabeln, 10 Jahre Herstellergarantie

600W 80+ Bronze SemiModular

General 650W 80+ GOLD Full Modular

MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 12 Number of power supply connector 4-pin 12V: 0 8-pin 12V power connectors: 1 Number of power supply connector 4+4-pin 12V: 1 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 6 PCI-E 8-pin power connectors: 0

AC-DC Industrial DIN rail power supply; Output 48Vdc at 10A; metal case; EU input only; DRP-480S-48 is succeeded by NDR-480-48.  

Thermaltake Toughpower GF3 PS-TPD-1350FNFAGE-4

Qoltec 50342