The GIGABYTE AORUS ELITE AE850PM PG5 ICE power supply offers reliable performance and a range of safety features to support any gaming setup. With a robust power output of 850 W, this internal power supply delivers consistent voltage at +3.3 V, +5 V, and ±12 V. It features an 80 PLUS Platinum certification that ensures high efficiency of up to 92%, reducing energy consumption and optimizing performance during demanding tasks. The fully modular design allows for easy cable management, ensuring a tidy installation in your system, while the high-quality cooling system with a 120 mm fluid dynamic bearing cooling fan keeps the unit operating efficiently and quietly at all times. This power supply excels in protection with features including overheat, overcurrent, overvoltage, overpower, and short-circuit protection, providing peace of mind for users. The GIGABYTE AORUS ELITE AE850PM PG5 ICE is compliant with various standards including RoHS, FCC, and WEEE, ensuring that safety and environmental considerations are met. With a Mean Time Between Failures (MTBF) of 100,000 hours, this power supply is designed for longevity and durability, making it a reliable choice for any high-performance PC build.
GIGABYTE P650SS + 80 PLUS Silver certified (230V EU) + Support Intel ATX 3.0 standard + 120mm Fluid Dynamic Bearing (FDB) Fan + Flat cable design + Powerful single +12V rail + OVP/OPP/SCP/UVP/OCP/OTP protection 80 PLUS SILVER CERTIFIED The 80 Plus Silver certification (230V EU) guarantees a 90% efficiency rate at a 50% load, resulting in reduced power wastage, diminished heat generation, and minimized fan noise. Support Intel ATX 3.0 standard The P650SS can sustain up to 2x total power excursion. It is fully compatible with Intel PSDG (Power Supply Design Guide) ATX 3.0 standard which supports up to 200% power excursion, reaches 70% low load efficiency and complies with required power supply timing standards. 120MM FLUID DYNAMIC BEARING(FDB) FAN High-performance Fluid Dynamic Bearing fan uses oil film shock absorption technology to effectively reduce noise, making it quieter than conventional sleeve fan and providing more than twice the lifespan. In addition, the fan will detect the current power usage and temperature, automatically adjust the fan speed to minimize the noise. RELIABLE FLAT CABLE DESIGN The utilization of flat cables minimizes clutter while enhancing the thermal performance of the chassis. SINGLE +12V RAIL The single +12V rail delivers optimal power output, stability, and hardware compatibility. This design not only simplifies power cable installation but also stands as the most effective choice for overclocking purposes. PROTECTION To guarantee the stable operation of your entire computer system under any circumstances, we have incorporated a range of protective features including OCP, OTP, OVP, OPP, UVP, and SCP. Moreover, we have obtained safety certifications from various countries to ensure the consistent and secure functioning of your system.
G12 GMThe G12 GM Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GM-Series achieves 80 PLUS® Gold standard, providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively.This efficiency, combined with Active Power Factor Correction, enables the G12 GM series power supplies to reduce energy waste, resulting in savings on energy costs for users.Additionally, the G12 GM units utilize the LLC resonant converter design and the industry’s leading Smart and Silent Fan Control (S2FC) for optimal performance and quiet operation.
FOCUS GX ATX 3 Following the well-established legacy of the Seasonic FOCUS Series, the FOCUS GX Series has been upgraded to comply with the ATX 3.1 and PCIe 5.1 standards. It offers a complete range of power supplies from 750W to 1000W, all within a compact 140mm depth. Each unit features a 135mm fan, a 12V-2×6 cable, and our new OptiSink technology. These units are designed to be perfect allies in powering the latest high-power graphics cards and processors available on the market.
ATX power supply RAPTOR 500W, BRONZE 80+, Single Rail, DC-DC RAPTOR 500W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 500W power supply, 500W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 100W on the +3.3V and + 5V lines and 13.6W on the remaining lines. So the maximum power significantly (approx. 613W) exceeds the rated power of 500W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 270° uF (in the RAPTOR 500 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 500W - maximum power on the 12V line is as much as 500W, combined on the 5V & 3.3V lines is 100W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1305g EAN code: 5902539602258 Secondary side wiring: 3x Molex connector (on 3 cables 60-75cm long, flat black, shared with SATA) 5x SATA connector (on 3 cables 45-60cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
ATX power supply RAPTOR 600W, BRONZE 80+, Single Rail, DC-DC RAPTOR 600W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 600W power supply, 600W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 721W) exceeds the rated power of 600W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 330° uF (in the RAPTOR 600 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 600W - maximum power on the 12V line is as much as 600W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1330g EAN code: 5902539602265 Secondary side wiring: 3x Molex connector (on 3 cables 60-75cm long, flat black, shared with SATA) 5x SATA connector (on 3 cables 45-60cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
The updated Seasonic CORE GX ATX3 series complies with the latest ATX3 standards and includes four output ranges from 1000 W to 650 W in both black and white colors. Catering to a broad spectrum of PC enthusiasts and system builders, these power supplies provide a fine balance between cost and performance. The 80 PLUS® Gold certified Seasonic’s Core GX line is a fully modular design equipped with black cables featuring a braided pattern. These power supplies are solid performers for a large range of applications, where a 120 mm fluid dynamic bearing fan is combined with Seasonic’s Smart and Silent Fan Control to ensure the optimal cooling performance at the lowest possible noise level. These quality power supplies are backed up by Sea Sonic’s 7-year worldwide manufacturer’s warranty. CORE GX ATX 3 at a Glance 80 PLUS Gold Efficiency: Reduces energy waste, delivering high efficiency under all loads. Fully Modular Design: Clean cable management and easy customization for streamlined builds. Silent Operation: Premium fan control for quiet performance, even under heavy loads. Enhanced Stability: Advanced components provide reliable, stable power for demanding systems. ATX 3.0 Ready: Future-proofed for compatibility with modern and upcoming hardware. Compact Form Factor: Fits a wide range of cases without sacrificing performance.
The Chieftec VITA SM3 BPX-850-C power supply offers reliable performance for demanding applications. With a robust power output of 850 W, it is designed to support high-performance systems while maintaining efficiency. The semi-modular design helps to reduce cable clutter, allowing for improved airflow and easier installation.This power supply includes multiple protection features such as overcurrent, overvoltage, and short-circuit protection to ensure the safety of your components. The cooling system is equipped with a 120 mm fan that operates efficiently, providing effective heat dissipation. The product is compliant with various standards, such as RoHS and WEEE, making it an environmentally responsible choice for users.
The APB-500B8 of the new VALUE SERIES offers both quality and efficiency at a highly competitive pricing. Equipped with a vast amount of required connectors, long native cables and a silent running fan with installed thermal board, the PSU runs quietly on full load and provides REAL power, thereby providing all security features. Certified by CE, CB TÜV, EAC amongst many others, it’s the VALUE choice!
Thermaltake Toughpower TF3 1550W Modular 80 Titanium 14cm Gen5 Power Supply. This product is a true masterpiece in its class, offering not only reliability and efficiency, but also innovative solutions that will make your computer experience even more satisfying. The impressive 1500 W will provide you with enough energy to power even the most demanding components. Thanks to this, your equipment will operate stably and smoothly, regardless of the load. Additionally, the use of active PFC translates into energy efficiency, which will not only have a positive impact on your wallet, but also on the environment. The 14 cm fan is a guarantee of proper air circulation inside the power supply, which translates into maintaining an optimal operating temperature. The fan speed is adjustable, which allows you to adapt it to the current needs and preferences of the user. Thanks to this, you can enjoy quiet operation of the power supply, even during intensive use of the computer. The modular design of the power supply is another advantage of this product. By connecting only the cables you actually need, you will avoid clutter in your computer case and provide yourself with better airflow. It's not just a matter of aesthetics, but also functionality - easier cable management means faster assembly and disassembly of components. The dimensions of the power supply (150 x 86 x 180 mm) mean that it will easily fit in most computer cases, without taking up too much space. This is important, especially if you care about the compact design of your set. Thermaltake Toughpower TF3 1550W Modular 80 Titanium 14cm Gen5 is a proposition for people who value reliability, efficiency and innovative solutions. Thanks to it, your computer will work efficiently and without failures, and you will be able to enjoy the smooth operation of your favorite applications and games.
The G12 GM Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GM-Series achieves 80 PLUS® Gold standard, providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GM series power supplies to reduce energy waste, resulting in savings on energy costs for users. Additionally, the G12 GM units utilize the LLC resonant converter design and the industry’s leading Smart and Silent Fan Control (S2FC) for optimal performance and quiet operation.
Asus ROG Loki SFX-L 850W Platinum power supply is a high-quality power supply designed for gaming and high-performance systems. It has a compact SFX form factor and a power output of 850W. The power supply is 80 PLUS Platinum certified, ensuring high efficiency and low power consumption. It features a 24-pin ATX motherboard power connector, three 6+2 pin PCI Express power connectors, and six SATA connectors, making it compatible with a wide range of components. The power supply also comes with a 2-year warranty for added peace of mind.
The Lian Li EDGE 80 PLUS Platinum Power Supply is a high-performance PSU designed for demanding systems. With 1000 watts of power, it supports PCIe 5.1 and ATX 3.1 standards, ensuring compatibility with the latest components. This power supply is 80 PLUS Platinum certified, offering exceptional energy efficiency. L-Shape design for dual chamber case 80 PLUS Platinum Efficiency Built-in USB expantion hub with 4 internal USB 2.0 headers Integrating German EPCOS bulk capacitors In-house R&D 12V-2×6 alloy copper soldered terminals ATX 3.0/3.1 compliant PSU Full modular sleeved cable with cable comb MB/CPU/GPU connectorsINNOVATIVE L-SHAPE DESIGN Engineered specifically for dual-chamber chassis such as the LIAN LI O11 series, the EDGE PSU’s L-shape design is ideal for vertical installation at the second chamber.This unique form factor reorients the connectors outward, simplifying cable management and ensuring a clean, organized build.POWER AND USB HUB TWO-IN-ONE The full Edge Series integrates 4 × 9-pin internal USB expansion, which function as a 1-to-7 USB hub, simplifying the connection of USB devices such as UNI fans, Strimer Plus, and RGB controllers to the motherboard. All USB ports features uninterruptible power, allowing connected devices to remain operational when the PC is turned off, as long as the power supply is on. Each port supports a rate current of 500mA.1. CONNECT TO USB DEVICESPort #1 provides 1 USB signal, while port#2/3/4 each provide 2 USB signals. This allows for up to 7 USB devices when using a 1-to-2 splitter cable at port #2/3/4 .Note: Due to the TL controller’s 2-in-1 USB design to support both TL LCD and TL, it is recommended to connect it to port#2/3/4. Other LIAN LI or third-party controllers can be connected to any port.2. CONNECT TO MOTHERBOARD Offers two options for motherboard signal connection to accommodate different configurations.STANDARD INTERNAL USB CONNECTOR Connect to the motherboard in the main chamberUSB TYPE A CONNECTOR Connect to the rear IO of the motherboardPLATINUM CERTIFIED Achieving the 80 PLUS, Cybenetics and PPLP Platinum certifications, the EDGE Series ensures top-tier energy efficiency, reducing power consumption and heat output while delivering reliable, stable performance.ATX 3.0 AND 3.1 COMPLIANT Fully compliant with ATX 3.0 and 3.1 standards, the EDGE Series meets the latest power supply specifications, ensuring compatibility with the newest components and motherboards.STABLE DUAL COLOR PCIE5.1 CONNECTOR LIAN LI’s in-house R&D developed 12V-2×6 alloy copper soldered terminals for secure and efficient power delivery, enhancing system stability and performance. Dual-color shell for confirming secure connectionsAdded gold plating to prevent short circuitsSoldered wire and terminal connection for current stabilityIncreased copper thickness to 0.25mm for lower contact resistance INDUSTRIAL GRADE CAPACITORS The EDGE PSU integrates the German EPCOS capacitors, offering compact, robust performance with higher tolerance to temperature and harsh environments. Featuring LLC topology and Active PFC, the EDGE PSU enhances efficiency, reduces heat generation, and ensures cleaner, more reliable power delivery.COOL IN SILENCE Designed for optimal performance, the open style mesh facilitates excellent heat dissipation for internal components. This feature is especially beneficial for the 120 MM PWM fan, which operates efficiently with minimal noise, ensuring the system stays cool and quiet even under heavy loads.Edge 1000W Fan Acoustic Noise (Ambiance temperature 25℃)PREMIUM BRAIDED SLEEVED CABLES FOR A CLEAN BUILD The power supply units come equipped with 20+4pin, CPU, PCIe 6+2pin, and 12V-2×6 cables featuring premium braided sleeves. These cables are designed with easy-to-adjust cable combs, ensuring very clean curves and cable runs for an aesthetically pleasing and organized dual chamber build.Comprehensive SATA Power Solutions Included with the EDGE PSU series are several SATA power cables to suit various needs: Y-Type SATA Cable: Perfect for connecting drives and controllers located in different areas, providing flexibility and reducing cable clutter.Close-Type SATA Cable: A 300mm long cable with 15mm spacing between power connectors, making it easy to attach devices while maintaining a tidy setup.Note: Please do not connect 850W or 1000W cables to a 1300W power supply unit. Using incompatible cables can lead to serious damage to your components and may void your warranty.COMPREHENSIVE CONNECTORS The modular cables are measured precisely for the dual chamber chassis to avoid bulkiness and ensure efficient cable management.10 YEARS WARRANTY EDGE series are crafted with high-quality materials for superior performance and longevity. Enjoy peace of mind with our extensive 10-year warranty.
