ATX power supply RAPTOR 500W, BRONZE 80+, Single Rail, DC-DC RAPTOR 500W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 500W power supply, 500W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 100W on the +3.3V and + 5V lines and 13.6W on the remaining lines. So the maximum power significantly (approx. 613W) exceeds the rated power of 500W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 270° uF (in the RAPTOR 500 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 500W - maximum power on the 12V line is as much as 500W, combined on the 5V & 3.3V lines is 100W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1305g EAN code: 5902539602258 Secondary side wiring: 3x Molex connector (on 3 cables 60-75cm long, flat black, shared with SATA) 5x SATA connector (on 3 cables 45-60cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
Intelligent iCUE Component Ecosystem Transform the way you build your PC with breakthrough single-cable technology that automatically detects and configures fans, CPU cooling, and other internal components. Integrated iCUE LINK System Hub The first CORSAIR PSU equipped with the iCUE LINK system hub, allowing control of up to 24 iCUE LINK devices to take cooling and lighting to the next level. Side Connectors All fully modular connectors are placed on the side of the PSU for easy access, simplifying upgrades and cable routing. The included molded PVC cable set features slightly smaller Type-5 connectors for easier cable management and compact bundling. Cybenetics Platinum Certification Stable power with up to 91% total efficiency, backed by Cybenetics Platinum certification for lower energy consumption, quieter operation, and reduced operating temperature. Native 12V-2X6 GPU Power Cable CORSAIR HXi SHIFT PSUs include all connectors needed to power modern and future high-end PCs equipped with demanding graphics cards and processors. ATX 3.1 Compliance and PCIe 5.1 Ready HXi SHIFT series PSUs feature a fully digital design for precise power regulation, fast response to changing loads, and the ability to monitor and adjust OCP settings via iCUE. Quiet Operation with Zero RPM Mode The dynamic oil bearing fan operates at minimal noise, and Zero RPM mode makes it virtually silent under low to medium loads.
Fan speed (max): 1900 MOLEX power connectors: 3 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2
Take care of the right power supplyTake care of the right power supply. The driving force of a computer to work are its components - motherboard, graphics card, processor and other elements. In order to ensure the proper and failure-free operation of all components, you must ensure their reliable power supply. The more demanding components, the more efficient power supply you need. The Qoltec brand has prepared for you a wide selection of products among which you will find the right model for you. Ensure the right powerThe task of the PCI-E power supply is to provide a stable voltage to the computer. In addition, our product offers: protection systems: undervoltage, overvoltage, overcurrent, short circuit, thermal, 100 000 hours of trouble-free operation - for quality guarantee, quality confirmed by certificates: CE, RoHS.
DARK POWER 13 1000W NO COMPROMISE SILENCE AND PERFORMANCE The be quiet! Dark Power 13 1000W offers 80 PLUS® Titanium efficiency, virtually inaudible operation, and ATX 3.0 compliance for next-gen GPU compatibility. - 80 PLUS Titanium efficiency (up to 95.2%) - ATX 3.0 PSU with full support for PCIe 5.0 GPUs and GPUs with 6+2 pin connector - Improved frameless Silent Wings fan for virtually inaudible operation - Full-mesh front with funnel shape air inlet upholds the high air circulation abilities - Overclocking key switches between four 12V rails and one massive 12V rail - Active Rectifier + full bridge LLC technology provides unmatched signal stability and extremely high efficiency - Modular cable management for maximum convenience Dark Power 13 ATX 3.0, 1000 Watts Cooling System 13.5cm fan, 80 PLUS TITANIUM PFC Active, MTBF 100000 hours Colour Black
The CORSAIR SF Series SF1000 power supply offers exceptional efficiency and versatility for your PC or server build. With 80 PLUS Platinum certification, it ensures high energy efficiency, reducing electricity costs and heat generation. Its 92 mm cooling fan, equipped with a zero RPM fan mode, keeps your system cool and quiet under low to medium loads. The fully modular cable management system allows you to use only the cables you need, leading to a cleaner build and better airflow. With comprehensive protection mechanisms, including overheat, overpower, overvoltage, short-circuit, and undervoltage protection, the SF1000 keeps your components safe against electrical anomalies. Suitable for powering demanding systems, the SF1000's 1000 watts of power and wide range of compatible connectors make it a solid choice for high-end PCs or reliable servers.
The G12 GM Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GM-Series achieves 80 PLUS® Gold standard, providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GM series power supplies to reduce energy waste, resulting in savings on energy costs for users. Additionally, the G12 GM units utilize the LLC resonant converter design and the industry’s leading Smart and Silent Fan Control (S2FC) for optimal performance and quiet operation.
G12 GCThe G12 GC Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GC-Series achieves 80 PLUS® Gold standard of providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GC series power supplies to lessen energy waste, which translates into savings on the costs of energy for its users. In addition to being greatly efficient, the G12 GC units utilize the LLC resonant converter design, and the industry’s leading Smart and Silent Fan Control (S2FC).
TC-1300T The ASRock TAICHI 1300T supports both current and future standards, fully compliant with ATX12V V3.1 and PCIe Gen 5.1. Ideal for both current systems and future builds, this power supplies can handle up to 235% power excursion and respond swiftly to power spikes, ensuring reliable, safe power for your components.
