G12 GCThe G12 GC Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GC-Series achieves 80 PLUS® Gold standard of providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GC series power supplies to lessen energy waste, which translates into savings on the costs of energy for its users. In addition to being greatly efficient, the G12 GC units utilize the LLC resonant converter design, and the industry’s leading Smart and Silent Fan Control (S2FC).
ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
Die ADVAN GM-Serie ist sowohl mit der neuesten ATX 3.1-Verordnung kompatibel, um bis zu 200 % Leistungsausweitung zu unterstützen, als auch mit der neuen Schnittstelle des PCIe 12V-2x6 Connectors, so dass auch bei zukünftigen Hardware-Upgrades Spitzenleistung gewährleistet ist. LLC-Resonanzwandler-Topologie mit Synchron-Gleichrichter sorgen für eine Reduzierung der Schaltverluste, Steigerung des Wirkungsgrads und Regelung der Ausgangsspannung unter Lastbedingungen. Ein 120 mm großer Hydrauliklüfter (HYB) reduziert die Lüftergeräusche auf ein Minimum und bietet gleichzeitig maximale Kühlleistung.
Die ADVAN GM-Serie ist sowohl mit der neuesten ATX 3.1-Verordnung kompatibel, um bis zu 200 % Leistungsausweitung zu unterstützen, als auch mit der neuen Schnittstelle des PCIe 12V-2x6 Connectors, so dass auch bei zukünftigen Hardware-Upgrades Spitzenleistung gewährleistet ist. LLC-Resonanzwandler-Topologie mit Synchron-Gleichrichter sorgen für eine Reduzierung der Schaltverluste, Steigerung des Wirkungsgrads und Regelung der Ausgangsspannung unter Lastbedingungen. Ein 120 mm großer Hydrauliklüfter (HYB) reduziert die Lüftergeräusche auf ein Minimum und bietet gleichzeitig maximale Kühlleistung.
• 720 W 100 - 240 V 50/60 Hz • Emaplaadi toitepistmik: 20+4 pin ATX • PC/server ATX 80 PLUS Gold • Aktiivne 4 cm • Must FSP FSP720-20RAB, 720 W, 100 - 240 V, 50/60 Hz, 10-5 A, 60 A, 3 A
MODECOM Volcano HEX 750W Power SupplyThe Volcano Hex series of Volcano power supplies is designed based on the ATX 3.1 and PCI Express 5.1 standards, ensuring support for advanced and demanding hardware solutions on the market. The ATX 3.1/PCIe 5.1 standards meet the requirements of the highest-end graphics cards and pose significant challenges for computer power supplies, as they require support for peak loads up to twice the rated power of the power supply. The Volcano Hex is a power supply platform built using the Half-bridge LLC Resonant Converter topology, with a DC-DC circuit for the 3.3V and 5V lines, ensuring stable voltages regardless of the power supply's load.Supports demanding computers and those yet to be developed.Computers with powerful graphics cards and processors require a power supply that can handle high power demands. The MODECOM Volcano Hex is built according to ATX 3.1 and PCIe 5.1 standards, ensuring stable operation even in the most demanding scenarios, such as gaming and advanced programs. It delivers 750 watts, which should easily handle new computer systems.Certified EfficiencyThe Volcano Hex supports input voltages ranging from 100V to 240V and ensures high energy efficiency, meeting the requirements of the 80Plus Gold standard. Certification was granted by Cybenetics, which tests power supplies over a much wider range than the 80Plus standard.A Quieter and Cooler Computer Thanks to Clever DesignThe Volcano Hex power supply is designed to avoid overheating and noise. It features a large, quiet fan (14 cm) that effectively cools the system, and thanks to a special bearing, it operates very quietly even when playing demanding games. Additionally, the use of flat cables and the ability to detach them allow for improved airflow within the case. What does this mean for you? Lower computer temperatures Convenient and tidy cable management You gain the ability to build your computer in the most aesthetically pleasing way possible. Japanese capacitorsWe use only the highest quality components. The MODECOM Volcano Hex power supply features exclusively Japanese capacitors, ensuring stability, reliability, and long life.Strong 12V railModern computer systems require power supplies to deliver the highest possible power, primarily through the 12V rail. Our power supplies are no exception, and the maximum load on this rail corresponds to almost 100% of the rated power that can be delivered to devices using 12V (i.e., the computer's CPU and GPU).Stable operation is a pleasureThe MODECOM Volcano Hex power supply is designed to ensure your computer runs smoothly and restarts without interruptions, even if you're gaming, streaming, or editing videos. Voltages are stable and predictable, which means: Your computer won't freeze. Your components are protected to the highest possible standard. You can play or work without constantly clicking quick saves. The kit includes cables that you can, but don't have to, connect to the power supply. If you don't have multiple SSDs/HDDs, you can leave some of the power cables in the box and use them only after you buy additional drives. The same applies to cables for an additional graphics card or other components. Modular Power Supply Cables: 1 x MB: 20+4P (Length: 600 mm) 1 x SATA+SATA+SATA (Length: 500+150+150 mm) 1 x SATA+SATA+SATA (Length: 500+150+150 mm) 1 x IDE+IDE+IDE+FDD (Length: 500+150+150+150 mm) 1 x CPU: P8 (4+4) (Length: 700 mm) 1 x CPU: P8 (4+4) (Length: 700 mm) 1 x PCI-E: P(6+2)+P(6+2) (Length: 550+120 mm) 1 x PCI-E: P(6+2)+P(6+2) (Length: 550+120 mm) 1 x 12V-2x6 600W (Length: 550mm) Flat cables and modular cabling provide flexibility and improved airflow.Volcano Hex power supplies feature fully modular cabling, reducing the amount of cabling inside the computer case. This improves airflow and facilitates neat cable management. The cable harnesses used to connect the power supply are flat, further enhancing the overall appearance of the assembled computer system. Besides convenience and aesthetics, they provide all the connectors required for ATX 3.1 and PCIe 5.1 computer systems, and the diameter of the cables used safely delivers power to the components being powered.
The PHANTEKS AMP GH V2 1000W is a high-performance ATX 3.1 power supply designed for demanding gaming PCs, offering reliable 1,000-watt power delivery. Featuring 80 PLUS Platinum certification, it achieves up to 94% efficiency for energy-saving operation. The PSU uses a quiet 120 mm fan with a hydrodynamic bearing for optimal cooling, while the fully modular design and individually textured cables help reduce cable clutter and improve airflow. Its semi-passive hybrid mode enables silent operation at the press of a button. Equipped with a 12V-2x6 power cable for powerful graphics cards and gold-plated connectors, it supports the latest PCIe 5.1 standard and ensures efficient, flexible, and tidy system builds.
DarkFlash EMT850 computer power supply (black)The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT850ColorBlackTotal power850 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash PMT1050 computer power supply (white)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorWhiteTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDWhite computer power supply on a dark background with yellow stripesWhite DarkFlash power supply with marked ports on a dark background
DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD
MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 Number of power supply connector 4-pin 12V: 1 8-pin 12V power connectors: 0 Number of power supply connector 4+4-pin 12V: 0 PCI-E 6-pin power connectors: 1 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Dimensions: 63 x 125 x 101 mm Weight: 0.843 Power supply: +3.3V 18AMaximum 97 W+5V 15AMaximum 240W
- The Argus APS-620W – ideal for sophisticated office and gaming solutions- The Argus APS-620W provides the customers with a high efficiency of at least 82% and therefore protects environment and wallet.- Thanks to the efficient construction and the ideal configured connector layout the APS-620W provides with sufficient performance for the connected components.- The yellow 120mm fan works silently and ensures an optimal cooling of the power supply.Koguvõimsus620 WAC-sisendpinge115 - 230AC-sisendsagedus47 - 63Maksimaalne sisendvool (110 V juures)+12V1,+12V2,+3.3V,+5V,+5Vsb,-12VVõimsusteguri korrigeerimise (PFC) tüüpAktiivneKombineeritud võimsus (+3,3 V)103 WKombineeritud võimsus (+5 V)103 WKombineeritud võimsus (-12 V)3,6 WKombineeritud võimsus (+5 Vsb)15 WMaksimaalne väljundvool (+3,3 V)18 AMaksimaalne väljundvool (+12 V 1)30 AMaksimaalne väljundvool (+12 V 2)30 AMaksimaalne väljundvool (+5 V)15 AMaksimaalne väljundvool (-12 V)0,3 AMaksimaalne väljundvool (+5 Vsb)3 AVentilaatori läbimõõt12 cmVentilaatorite arv1 ventilaator(id)Ventilaatori paiknemineÜlaosaJahutuse tüüpAktiivneEmaplaadi toitepistmik20+4 pin ATXVälisseadmete (Molex) toitepistmikud (4 kontakti)4SATA-toitepistmike arv4PCI Expressi toitepistmikud (6 + 2 kontakti)1CPU-toitepistik (4 + 4 kontakti)JahATX-toitepistmik (20 + 4 kontakti)JahFlopidraivi toitepistmik1PCI Expressi pistmikJahFlopidraivi pistmikJahKaabelduse tüüpMittemodulaarneKujutegurATXOtstarvePCMüratase21 dBATX-versioon2.31Sisse/välja lülitiJahToote värvMustLaius150 mmSügavus140 mmKõrgus86 mmKaal1,28 kgPakendi laius240 mmPakendi sügavus95 mmPakendi kõrgus170 mmPakendi kaal1,62 kgPakendi tüüpKarpJuhendJah
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2
Power seadme tüüp: toiteplokk Power Device Location100/240 V väljundpinge: DC 3.3/5/±12 V Maksimum väljundusvõimsus: 700 W Circuit Protection12V: 58 A (700 ) -12V: 0.3 A (3.6 ) +5VSB12.5 ) 20+4-pin Main ühenduspesa: 12V Power ühenduspesa: 14-pin Peripheral Power ühenduspesa: 3 4-pin Floppy Drive ühenduspesa1S-ATA ühenduspesa: 6 6/8-pin PCI Express ühenduspesa1Fan Diameter: 140 mm External värv: must kaabel Included160 mm kõrgus (mm): 86 mm laius (mm)150 mm Nominal kaal: 1.68 kg Warranty Products Returnable: Jah garantii Term (month)1.68 kg Pieces in pack: 1Box kaal Brutto (kg): 2.04 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1Package Type: Retail EAN Code1
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 3 Number of power supply connector 4-pin 12V: 1 8-pin 12V power connectors: 1 Number of power supply connector 4+4-pin 12V: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 2 PCI-E 8-pin power connectors: 0
The 1200W Thermaltake Toughpower GF3 Snow is a high-performance power supply unit designed for demanding PC builds. With a wattage of 1200W, it is perfect for powering high-end components. It features a modular design for easy cable management, a 14 cm cooling fan for efficient heat dissipation, and a 24-pin MB power connector for compatibility with most motherboards. The unit's dimensions are 150 x 86 x 160 mm, and it has a net weight of 3.394 kg, fitting well into standard ATX form factor cases.
Introducing the MWE Bronze V3 230V, the evolutionary next step in Cooler Master power and the ATX 3.1 upgrade to our MWE Bronze V2 PSU. With features such as 80 Plus Bronze efficiency, a DC to DC + LLC circuit design, and a quiet HDB fan cooling, the V3 provides valuable performance in multiple dimensions. Several changes and additions improve the overall user experience. Together, these design choices deliver an advanced PSU that is highly efficient and reliable. With an embossed cable, exceptional temperature resilience and a 5 year warranty, the MWE Bronze V3 will evolve your machine.
Powerful ATX 3.1 power supply with 850 watts, efficient Gold certification, cables with individually textured strands, silent hybrid mode at the push of a button, fully modular cable management, includes 12V-2x6 cable
Powerful ATX 3.1 power supply with 750 watts, efficient Gold certification, cables with individually textured strands, silent hybrid mode at the push of a button, fully modular cable management, includes 12V-2x6 cable
