ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
Precise, Silent PowerIntroducing the X Silent Edge Platinum 230V, the industrys first 1100W PSU. The Edge features completely silent and dust-free operation, innovative heat pipe technology, advanced heat dissipation, 80 Plus Platinum efficiency, an active bridge rectifier, and a digital monitor powered by Cooler Masters MasterCTRL software. With these features, the Edge delivers precise and silent power.The X Silent Edge Platinum 230V also includes ATX 3.1 support, a durable 12V-2x6 cable, reliable, industrial-grade Infineon ICs, fully modular cabling, high-quality Japanese capacitors, and a 15-year warranty. The X Silent EdgePlatinum is the next frontier of quiet, reliable, and efficient operation.
Lian Li SP Series Platinum 80 PLUS Platinum Power Supply, SFX, fully modular, PCIe 5.1, ATX 3.1 - 850 Watts, white With the Lian Li SP Platinum 850W power supply, you are perfectly equipped for modern gaming hardware. This compact power supply delivers up to 850 watts of power and effortlessly supports high-end CPUs from Intel or AMD as well as graphics cards like the RTX 5070 Ti. Thanks to the space-saving SFX form factor and the included ATX bracket, it can be installed in almost any case – from Mini-ITX to Full Tower. With an efficiency of up to 92% at half load, it meets the 80 PLUS Platinum certification. This saves you electricity and benefits you with quiet cooling thanks to the 92 mm fan with Zero-RPM mode. Compact SFX form factor: Includes ATX bracket for broader case compatibility 850 watts power: Ideal for high-performance gaming systems 80 PLUS Platinum efficiency: Up to 92% efficiency at half load Fully modular design: With a complete set of braided cables ATX 3.1 & PCIe 5.1 standard: Future-proof with 12V 2x6 connector Quiet cooling: 92 mm FDB fan with Zero-RPM mode Compact & flexible to use The Lian Li SP Platinum impresses with its compact design – just 125 x 100 x 63.5 mm in size. This allows it to easily fit into small SFX cases and, thanks to the included bracket, it can also be used in ATX cases. Perfect for builds where space and performance are equally important. Powerful for modern hardware With up to 850 watts of power, the power supply is perfectly suited for current high-end components. It delivers enough power for processors and graphics cards of the latest generation while still offering reserves for drives, peripherals, and cooling systems. High energy efficiency Thanks to Japanese Rubycon capacitors, the SP Platinum achieves particularly efficient power delivery. At half load, up to 92% of the consumed energy is converted into usable power. The result: 80 PLUS Platinum certification for highest efficiency and low heat generation. High-quality, modular cables The Lian Li SP Platinum features a fully modular design – for maximum flexibility and a clean look. All braided cables are flexible and easy to route. A special 12V 2x6 connector with two-colour marking ensures a secure connection. Additionally, a C14 to C13 extension cable with integrated power switch is included. This allows you to conveniently turn off your PC’s power supply – even if the PSU is deep inside the case. Safe & durable The power supply offers comprehensive protection features such as overcurrent, overvoltage, overload, and short circuit protection. This keeps your hardware safe in the long term. Thanks to high-quality components and precise manufacturing, the SP Platinum is designed for longevity – making it a reliable foundation for your system.
DarkFlash PMT1050 computer power supply (white)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorWhiteTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDWhite computer power supply on a dark background with yellow stripesWhite DarkFlash power supply with marked ports on a dark background
DarkFlash PMT1050 computer power supply (black)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorBlackTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), under voltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDBlack DarkFlash power supply with ventilation grille against a geometric pattern and yellow stripesSide of the DarkFlash power supply with visible modular sockets and inscription on a dark background
DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2
AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 12DC juures 2A; läbib LPS-i Ülimalt õhuke: ainult 35 mm laiUniversaalne vahelduvvoolu sisendKoormuseta energiatarbimine
AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 24VDC 1,5A juures; Pass LPS Ülimalt õhuke: ainult 35 mm lai Universaalne vahelduvvoolu sisend Koormuseta energiatarbimine
Introducing the MWE Bronze V3 230V, the evolutionary next step in Cooler Master power and the ATX 3.1 upgrade to our MWE Bronze V2 PSU. With features such as 80 Plus Bronze efficiency, a DC to DC + LLC circuit design, and a quiet HDB fan cooling, the V3 provides valuable performance in multiple dimensions. Several changes and additions improve the overall user experience. Together, these design choices deliver an advanced PSU that is highly efficient and reliable. With an embossed cable, exceptional temperature resilience and a 5 year warranty, the MWE Bronze V3 will evolve your machine.
The COUGAR PSU ATLAS 750 80Plus Bronze 750W is a high-performance power supply unit designed for ATX form factor systems. It features an 80 PLUS Bronze efficiency rating, ensuring reliable power delivery with reduced energy consumption. This PSU includes 3 MOLEX power connectors, 8 SATA connectors, and 4 PCI-E 8-pin power connectors, making it suitable for a wide range of components and peripherals. With a 120 mm cooling fan and a sleek black design, it is built to keep your system running smoothly, and it comes with a 24-month warranty for added peace of mind.
The GIGABYTE AORUS ELITE AE850PM PG5 power supply delivers reliable performance with a robust 850 watts output, ensuring that systems receive the necessary power with efficiency. Its features include overheat, overcurrent, overvoltage, overpower, and short-circuit protection, providing peace of mind during operation. The 80 PLUS Platinum certification signifies an efficiency rating of 92%, enhancing your gaming or workstation setup. With fully modular cables, this power supply facilitates an organized build, minimizing clutter and simplifying upgrades.Designed with a 120 mm fan featuring fluid dynamic bearing cooling, the AORUS ELITE ensures optimal thermal performance while operating quietly thanks to its Zero RPM fan mode. Multiple connectors like the 24 pin ATX and various PCI Express power options enhance compatibility with a wide range of components. Additionally, compliance with standards such as CCC, FCC, and RoHS underlines the manufacturing quality and environmental consideration behind this product.
G12 GCThe G12 GC Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GC-Series achieves 80 PLUS® Gold standard of providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GC series power supplies to lessen energy waste, which translates into savings on the costs of energy for its users. In addition to being greatly efficient, the G12 GC units utilize the LLC resonant converter design, and the industry’s leading Smart and Silent Fan Control (S2FC).
GIGABYTE P650SS ICE + Ice white aesthetics + 80 PLUS Silver certified (230V EU) + Support Intel ATX 3.0 standard + 120mm Fluid Dynamic Bearing (FDB) Fan + Flat cable design + Powerful single +12V rail + OVP/OPP/SCP/UVP/OCP/OTP protection 80 PLUS SILVER CERTIFIED The 80 Plus Silver certification (230V EU) guarantees a 90% efficiency rate at a 50% load, resulting in reduced power wastage, diminished heat generation, and minimized fan noise. Support Intel ATX 3.0 standard The P650SS ICE can sustain up to 2x total power excursion. It is fully compatible with Intel PSDG (Power Supply Design Guide) ATX 3.0 standard which supports up to 200% power excursion, reaches 70% low load efficiency and complies with required power supply timing standards. 120MM FLUID DYNAMIC BEARING(FDB) FAN High-performance Fluid Dynamic Bearing fan uses oil film shock absorption technology to effectively reduce noise, making it quieter than conventional sleeve fan and providing more than twice the lifespan. In addition, the fan will detect the current power usage and temperature, automatically adjust the fan speed to minimize the noise. RELIABLE FLAT CABLE DESIGN The utilization of flat cables minimizes clutter while enhancing the thermal performance of the chassis. PROTECTION To guarantee the stable operation of your entire computer system under any circumstances, we have incorporated a range of protective features including OCP, OTP, OVP, OPP, UVP, and SCP. Moreover, we have obtained safety certifications from various countries to ensure the consistent and secure functioning of your system.
