Tootekood: MEG Ai1300P PCIE5 1300WGTIN: 4719072970260Toiteallikad
The MEG series is revealed as a legend that represents the ultimate elegance in gaming. With the determination of transcending current gaming products, the flagship models push the limits of what an extreme gaming series can be. MEG AI1300P PCIE5 For gaming, ATX 3.0 1300 Watts, Cooling System 12cm fan 80 PLUS PLATINIUM, PFC Active
ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
TC-1650T The ASRock TAICHI 1650T supports both current and future standards, fully compliant with ATX12V V3.1 and PCIe Gen 5.1. Ideal for both current systems and future builds, this power supplies can handle up to 235% power excursion and respond swiftly to power spikes, ensuring reliable, safe power for your components.
Lian Li SP Series Platinum 80 PLUS Platinum Power Supply, SFX, fully modular, PCIe 5.1, ATX 3.1 - 850 Watts, white With the Lian Li SP Platinum 850W power supply, you are perfectly equipped for modern gaming hardware. This compact power supply delivers up to 850 watts of power and effortlessly supports high-end CPUs from Intel or AMD as well as graphics cards like the RTX 5070 Ti. Thanks to the space-saving SFX form factor and the included ATX bracket, it can be installed in almost any case – from Mini-ITX to Full Tower. With an efficiency of up to 92% at half load, it meets the 80 PLUS Platinum certification. This saves you electricity and benefits you with quiet cooling thanks to the 92 mm fan with Zero-RPM mode. Compact SFX form factor: Includes ATX bracket for broader case compatibility 850 watts power: Ideal for high-performance gaming systems 80 PLUS Platinum efficiency: Up to 92% efficiency at half load Fully modular design: With a complete set of braided cables ATX 3.1 & PCIe 5.1 standard: Future-proof with 12V 2x6 connector Quiet cooling: 92 mm FDB fan with Zero-RPM mode Compact & flexible to use The Lian Li SP Platinum impresses with its compact design – just 125 x 100 x 63.5 mm in size. This allows it to easily fit into small SFX cases and, thanks to the included bracket, it can also be used in ATX cases. Perfect for builds where space and performance are equally important. Powerful for modern hardware With up to 850 watts of power, the power supply is perfectly suited for current high-end components. It delivers enough power for processors and graphics cards of the latest generation while still offering reserves for drives, peripherals, and cooling systems. High energy efficiency Thanks to Japanese Rubycon capacitors, the SP Platinum achieves particularly efficient power delivery. At half load, up to 92% of the consumed energy is converted into usable power. The result: 80 PLUS Platinum certification for highest efficiency and low heat generation. High-quality, modular cables The Lian Li SP Platinum features a fully modular design – for maximum flexibility and a clean look. All braided cables are flexible and easy to route. A special 12V 2x6 connector with two-colour marking ensures a secure connection. Additionally, a C14 to C13 extension cable with integrated power switch is included. This allows you to conveniently turn off your PC’s power supply – even if the PSU is deep inside the case. Safe & durable The power supply offers comprehensive protection features such as overcurrent, overvoltage, overload, and short circuit protection. This keeps your hardware safe in the long term. Thanks to high-quality components and precise manufacturing, the SP Platinum is designed for longevity – making it a reliable foundation for your system.
DarkFlash EMT850 computer power supply (black)The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT850ColorBlackTotal power850 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash PMT1050 computer power supply (black)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorBlackTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), under voltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDBlack DarkFlash power supply with ventilation grille against a geometric pattern and yellow stripesSide of the DarkFlash power supply with visible modular sockets and inscription on a dark background
INTER-TECH PSU SL-500K, 500W, 120mm fan, bulk Power Device Type Power Supply Power Device Location Internal Input Voltage AC 230 V Maximum Output Power 500 W Circuit Protection Over Voltage Over Current Short Curcuit Protection +3.3V 30 A +5V 30 A +12V 30 A -12V 0.8 A +5VSB 2.5 A 20+4-pin Main Connector 1 4-pin +12V Power Connector 1 4-pin Peripheral Power Connector 2 4-pin Floppy Drive Connector 1 5-pin S-ATA Connector 3 Maximum Fans Supported Quantity 1 Fans Installed Quantity 1 Fan Diameter 120 mm Package Type Tray Depth (mm) 140 mm Height (mm) 86 mm Width (mm) 150 mm Warranty Products Returnable Yes Warranty Term (month) 24 month(s) Warranty Validation Criteria Serial Number Box Weight Brutto (kg) 1.3 kg Pack Weight Brutto (kg) 1.3 kg Packs in Box 1 Pieces in pack 1
- The Argus APS-620W – ideal for sophisticated office and gaming solutions- The Argus APS-620W provides the customers with a high efficiency of at least 82% and therefore protects environment and wallet.- Thanks to the efficient construction and the ideal configured connector layout the APS-620W provides with sufficient performance for the connected components.- The yellow 120mm fan works silently and ensures an optimal cooling of the power supply.Koguvõimsus620 WAC-sisendpinge115 - 230AC-sisendsagedus47 - 63Maksimaalne sisendvool (110 V juures)+12V1,+12V2,+3.3V,+5V,+5Vsb,-12VVõimsusteguri korrigeerimise (PFC) tüüpAktiivneKombineeritud võimsus (+3,3 V)103 WKombineeritud võimsus (+5 V)103 WKombineeritud võimsus (-12 V)3,6 WKombineeritud võimsus (+5 Vsb)15 WMaksimaalne väljundvool (+3,3 V)18 AMaksimaalne väljundvool (+12 V 1)30 AMaksimaalne väljundvool (+12 V 2)30 AMaksimaalne väljundvool (+5 V)15 AMaksimaalne väljundvool (-12 V)0,3 AMaksimaalne väljundvool (+5 Vsb)3 AVentilaatori läbimõõt12 cmVentilaatorite arv1 ventilaator(id)Ventilaatori paiknemineÜlaosaJahutuse tüüpAktiivneEmaplaadi toitepistmik20+4 pin ATXVälisseadmete (Molex) toitepistmikud (4 kontakti)4SATA-toitepistmike arv4PCI Expressi toitepistmikud (6 + 2 kontakti)1CPU-toitepistik (4 + 4 kontakti)JahATX-toitepistmik (20 + 4 kontakti)JahFlopidraivi toitepistmik1PCI Expressi pistmikJahFlopidraivi pistmikJahKaabelduse tüüpMittemodulaarneKujutegurATXOtstarvePCMüratase21 dBATX-versioon2.31Sisse/välja lülitiJahToote värvMustLaius150 mmSügavus140 mmKõrgus86 mmKaal1,28 kgPakendi laius240 mmPakendi sügavus95 mmPakendi kõrgus170 mmPakendi kaal1,62 kgPakendi tüüpKarpJuhendJah
