Die kompakte Bauform dieser Mini-ITX PSU erlaubt es, auch in engen Gehäusen die Komponenten mit Strom zu versorgen. Ein Kabel mit Buchse und Überwurfmutter wird an einem passenden Loch an der Gehäusewand angebracht und dient dem Anschluss eines externen 12V Netzteils (nicht im Lieferumfang enthalten), welches eine Leistung von bis zu 160W haben darf. Die Platine ist ausgestattet mit dem 24 Pin Hauptstromkabel sowie einem Strang mit 1x 4-Pin-5,25", 1x S-ATA-Stecker sowie einem Strang mit 1x 4+4 Pin-Stecker.
DarkFlash EMT750 computer power supply (black)The DarkFlash EMT750 power supply is a 750 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 62 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.28%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.28% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT750 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT750 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT750 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT750ColorBlackTotal power750 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
The DeepCool PQ1000G is a highly efficient ATX 3.0 power supply with 80 PLUS Gold and Cybenetics Platinum certification, delivering reliable performance even under demanding conditions. High-quality Japanese 105 °C capacitors ensure stability and durability, even at altitudes of up to 5000 meters. The advanced dual-capacitor topology guarantees a hold-up time of ≥ 16 ms at full load. Ideal for modern systems, the PQ1000G offers strong efficiency, first-class component quality, and support for current standards. For more information about the ATX 3.0 standard and compatibility, visit the official Intel website. Perfect for high-performance gaming or workstation builds.
Leistungsstarkes 750-Watt-Netzteil, hohe Effizienz durch 80 PLUS Gold-Zertifikat, starke Singlerail mit 62 A, innovatives CONNECT-Modul für die Anschlusskabel, modulares Kabelmanagement mit flachen Kabeln, 10 Jahre Herstellergarantie
Output voltage: 24 Output current (max): 4 Power supply output current: 96 Other features: Input voltage: 220 - 240 V Frequency: 50 - 60 Hz Cable length: 1.15 m Dimensions: 170 x 67 x 40 mm AC / DC power supply intended for telecommunications equipment and for automatic data processing equipment and devices for these machines.
High-performance SilverStone power supply with PCIe 5.0, 80 PLUS Gold, 750 watts of power, modular cable management, 12VHPWR connection for high-quality graphics cards
DarkFlash EMT650 computer power supply (black)The DarkFlash EMT650 power supply is a 650 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 54 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 86.96%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 86.96% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation area and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT650 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT650 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT650 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT650ColorBlackTotal power650 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver voltage protection (OVP), overload protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
FOSSIBOT F7200 Power StationThe FOSSIBOT F7200 is a state-of-the-art power station with a continuous power output of 7200 W and a capacity of 5.2 kWh, expandable up to 15.66 kWh using additional battery modules. The device is equipped with an EVE® LiFePO4 battery with a lifespan of over 6,500 cycles, a UPS function with a response time of less than 10 ms, and fast AC charging up to 3,000 W, making it ideal both as a home backup in case of a power outage and as a mobile power source. The model supports smart control via the BrightEMS app, features 4 AC outlets, and numerous additional ports for charging electronic devices. Thanks to its high power and extensive energy management capabilities, the device is ideal for use at home, in a workshop, in a camper, and during field work.High power for demanding devicesThe 7200 W output power allows you to power multiple high-power devices simultaneously. The station easily handles consumer electronics, home appliances, power tools, and devices used during mobile work. A peak power of up to 9000 W helps maintain stable operation of devices that require higher power consumption during startup. Four AC outlets enhance convenience and allow you to create a practical power hub at home or on the go.Fast Charging and Convenient UseThe FOSSIBOT F7200 supports multiple charging methods, allowing you to easily adapt your charging routine to current conditions. A maximum input power of 5200 W significantly reduces charging time, and when using AC charging, the device can reach full charge in approximately 2 hours and 15 minutes. The pass-through charging feature allows you to charge the station and use connected devices simultaneously. Additionally, 5-step input power adjustment provides better control over power consumption and allows you to adapt the device’s operation to your electrical system.Durable LiFePO4 battery and BMS protection systemThe device uses EVE® LiFePO4 cells with a capacity of 5222.4 Wh, which are distinguished by their high durability and operational stability. A lifespan exceeding 6,500 charge cycles allows you to use the station for many years without significant loss of battery capacity. Safety is ensured by the BMS system, which protects the device against overloading, overheating, overvoltage, and over-discharge. This solution enhances safety during daily use and contributes to a longer lifespan of the entire power supply system.Smart Energy Management and UPS FunctionThe F7200 model is equipped with a UPS function featuring a switchover time of less than 10 ms, allowing connected devices to operate almost continuously during a power outage. This is particularly useful when powering computers, network devices, or equipment requiring uninterrupted operation. Control via the BrightEMS app allows you to monitor operating parameters, check battery levels, and manage device settings from your smartphone. Additionally, the ability to schedule operations enables better energy consumption management and helps reduce operating costs.Mobile design ready for various applicationsDespite its large capacity and high power, the device is equipped with a telescopic handle and transport wheels that make it easy to move the station. The 670 × 450 × 410 mm enclosure is designed for operation in various conditions, and the operating temperature range of -10°C to 40°C allows the device to be used year-round. Its robust construction and CE, FCC, RoHS, and UN38.3 certifications confirm compliance with required safety standards. As a result, the FOSSIBOT F7200 can serve as both a mobile power source and an emergency power supply for your home or business.IncludedFOSSIBOT F7200 power station1.5 m AC power cable1.5 m MC4 to XT90 cable1.5 m car cable to XT601.5 m Anderson cable to MC4User manualService key x 2Insulated spade connectors x 2Insulated banana plugs x 2 ManufacturerFOSSIBOTModelF7200Capacity5222.4 Wh / 102 Ah / 51.2 VExpandableup to 15.66 kWhBattery typeLiFePO4 (EVE® LF100LA)Battery lifeover 6500 cycles to 80% capacityContinuous AC power7200 WPeak power9000 WAC outlets4 × ACUSB-A1 × QC 3.0 (18 W)USB-C1 × PD 20 W, 1 × PD 100 WMaximum AC charging power3000 WMaximum input power5200 WUPS function
FOSSIBOT FBP1200 1200W Power Station (green)The FOSSIBOT FBP1200 1200W is a modern power station with a built-in microinverter, an MPPT solar controller, and a 1958 Wh LiFePO4 battery. The device works with solar panels with a total power of up to 2000 W and allows you to store solar energy for use when it’s needed most. The AC output power of up to 1200 W can power many household appliances, and the modular design allows the system to be expanded to a capacity of 39.1 kWh. With an IP65 rating, a battery heating function for operation at temperatures ranging from -20°C to 55°C, quiet fanless cooling, and a 10-year warranty, the FBP1200 works well both as an emergency power source and as part of a photovoltaic system that helps lower energy bills.A complete, ready-to-use all-in-one systemThe FOSSIBOT FBP1200 combines a battery, a microinverter, and an advanced charge controller in a single enclosure, eliminating the need to purchase multiple separate devices. This solution simplifies setup and allows you to get your energy storage system up and running faster. The Plug & Play design allows for easy connection without complicated installation. The compact housing, measuring 47.6 × 30.8 × 25.7 cm, lets you conveniently place the device in your home, garage, or on your balcony.Smart Energy Management and Real SavingsThe built-in HEMS system analyzes energy consumption, weather forecasts, and dynamic electricity rates. Based on this information, it automatically determines when to charge the battery and when to power your home with stored energy. The device is compatible with over 700 energy providers in 32 European countries, allowing you to take advantage of additional features. As a result, the FBP1200 helps you use solar energy more efficiently and reduce your grid consumption.Durable LiFePO4 battery and reliable year-round operationHigh-quality LiFePO4 cells provide approximately 6,000 charge cycles, ensuring many years of use. The automatic battery heating system enables safe charging even at temperatures below 0°C. The IP65-rated enclosure effectively protects the device from dust and moisture. Natural convection cooling eliminates the need for noisy fans, so the station operates exceptionally quietly.Easy-to-read display and extensive featuresThe front panel features a color LCD display showing the charge level, input and output power, grid status, PV panel operation, and active functions such as Wi-Fi, Bluetooth, UPS, and battery heating. Additionally, the device offers an 18 W USB-A QC 3.0 port and a 100 W USB-C PD port for fast charging of phones and laptops. The manufacturer includes a complete set of mounting accessories and the cables needed to get started. This provides the user with an energy management system that is practically ready to use.Included in the setFOSSIBOT FBP1200 power stationAviation Socket output cable5-meter AC cable with plugL-shaped mounting bracketsMounting wrenches for balcony installationExpansion anchors with M5 x 60 x 4 screwsM5 × 10 x 4 screwsSafety and user manual ManufacturerFOSSIBOTModelFBP1200Battery TypeLiFePO4Rated Capacity1958 WhBattery Lifespanapproximately 6,000 cyclesMaximum AC Output Powerup to 1200 WCapacity Expansionup to 39.1 kWhProtection RatingIP65Operating Temperature Range-20°C to 55°CUSB PortsUSB-A QC 3.0 18 W, USB-C PD 100 WAdditional FeaturesHEMS, UPS, EPS, battery heating, natural coolingDimensions47.6 × 30.8 × 25.7 cmWeight24.5 kg
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 6 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2
