Output voltage: 24 Output current (max): 4 Power supply output current: 96 Other features: Input voltage: 220 - 240 V Frequency: 50 - 60 Hz Cable length: 1.15 m Dimensions: 170 x 67 x 40 mm AC / DC power supply intended for telecommunications equipment and for automatic data processing equipment and devices for these machines.
ROG THOR 850W Platinum II - ROG Thor 850W Platinum II is the quietest PSU in its class. - Lambda A++ Certification confirms the latest Thor wields menacing power in absolute stealth. - ROG heatsinks cover critical components, delivering lower temperatures and reduced noise. - A 135mm wing-blade fan with PWM control delivers lower noise and keeps thermals in check. - Built with low-ESR capacitors and other premium components to achieve 80 Plus Platinum Certification. - OLED display monitors power draw in real time. - Aura Sync compatibility lets you customize and sync lighting effects with other compatible hardware. ROG-THOR-850P2-GAMING For gaming/Braided cables/Display, 850 Watts Cooling System 13.5cm fan, 80 PLUS PLATINIUM PFC Active
The Lindy multi-country power supply is a regulated and suitable solution for powering connected equipment which require an output voltage and amperage up to 12 V 1.25 A. The included UK, EU, US and AUS adapters allow for global use of the power supply, while a standard DC jack ensures simple fitting with compatible devices.
XPG COREREACTOR II VE 650W. Total effekt: 650 W, Vekselstrømsindgangsspænding: 100 - 240 V, Vekselstrømsindgangsfrekvens: 47 - 63 Hz. Motherboard, strømstik: 24-pin ATX, Længde på strømkabel på bundkort: 65 cm, Strømkabellængde SATA: 150,450 mm. Formål: PC, Strømforsyningenhed (PSU) formfaktor: ATX, 80 PLUS certificering: 80 PLUS Gold. Produktfarve: Sort, Kølingstype: Aktiv, Ventilator diameter: 12 cm. Bredde: 150 mm, Dybde: 140 mm, Højde: 86 mm
High-performance fully modular ATX-3.1 power supply from Montech1,000W rated power for your high-end components80-PLUS and Cybernetics Platinum certification for absolute efficiency1x 12VHPWR connection for high-end graphics cardsFan with fluid dynamic bearingMontech Titan PLA: ATX-3.1 Power Supply for Your Gaming PCThe Montech Titan PLA provides you with 1,000W rated power, more than enough to power even the most powerful gaming hardware. In particular, PCIe 5.1 support ensures better security and performance for your graphics card.Additionally, the power supply has an 80-PLUS and Cybernetics Platinum certificate. At 50% load, it achieves an efficiency of up to 90%. This leads to less heat, less fan noise, and significantly higher reliability.Optimal CoolingThe ATX form factor allows for installation in most cases. Inside, there is a 135-mm fan with a fluid dynamic bearing, ensuring long life while generating lower noise levels.Connection OptionsOn the back of the power supply, you will find all the necessary connections for your hardware components. These include connections for powering the motherboard, CPU, and graphics card.
ASUS ATS-850G. Total power: 850 W, AC input voltage: 110 - 240 V, Power Factor Correction (PFC): Active. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 55 cm, SATA power cable length: 120,400 mm. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Gold. Product color: Black, Cooling type: Active, Number of fans: 1 fan. Compliance certificates: RoHS
ASUS ATS-750G. Total power: 750 W, AC input voltage: 110 - 240 V, Power Factor Correction (PFC): Active. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 55 cm, SATA power cable length: 120,400 mm. Intended use: PC, Power Supply Unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS Gold. Product color: Black, Cooling type: Active, Number of fans: 1 fan(s). Compliance certificates: RoHS
High-performance SilverStone power supply with PCIe 5.0, 80 PLUS Gold, 750 watts of power, modular cable management, and 12VHPWR connector for high-end graphics cards
Powerful ATX 3.1 power supply with 1,200 watts, highly efficient Platinum certification, individually textured cable strands, fully modular cable management, including 12V 2x6 cable High-performance ATX 3.1 power supply with 1,200 watts for high-end PCs 80 PLUS Platinum certification with efficiency up to 94% Quiet 120 mm fan with hydrodynamic bearing for efficient cooling Reduced cable clutter and improved airflow thanks to modular cable management Cables with individually textured cable strands for a tidy build Includes 12V 2x6 power cable for high-performance graphics cards The Phanteks AMP GH 1200W: Powerful and reliable The Phanteks AMP GH 1200W is a high-performance ATX 3.1 power supply that safely powers your gaming hardware. Phanteks has developed a compact power supply that, with a depth of only 140 mm, conforms to the standard ATX form factor and fits into most cases. By using high-quality electrical components, this 80 PLUS Platinum-certified power supply operates extremely efficiently. Its fully modular design with individually shielded and specially textured cables makes installation easier and ensures a neat appearance. ATX 3.1 PSU with PCIe 5.1 connector for graphics cards The AMP-GH series fully complies with the ATX 3.0 and 3.1 standards, making it compatible with the latest components. Phanteks has also equipped this power supply with a 12V 2x6 connector based on the PCIe 5.1 standard: ensuring you are well prepared for current and upcoming high-end GPUs. Maximum flexibility: various connection options and modular design The gold-plated connectors reduce electrical resistance and increase efficiency, ensuring energy-efficient and reliable operation. Included with the power supply are all necessary cables for motherboard, CPU, PCIe cards, SATA and Molex for drives and accessories. The fully modular design allows for easy installation and reduces cable clutter. Thanks to the wide range of connection options, your desktop PC can be flexibly adapted to your requirements. Note: Use only the supplied cables. Using other incompatible internal power supply cables may cause damage that is not covered by the manufacturer’s warranty.
DarkFlash EMT650 computer power supply (black)The DarkFlash EMT650 power supply is a 650 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 54 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 86.96%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 86.96% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation area and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT650 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT650 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT650 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT650ColorBlackTotal power650 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver voltage protection (OVP), overload protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash EMT850 computer power supply (black)The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT850ColorBlackTotal power850 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash PMT1050 computer power supply (white)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorWhiteTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDWhite computer power supply on a dark background with yellow stripesWhite DarkFlash power supply with marked ports on a dark background
DarkFlash EMT750 computer power supply (black)The DarkFlash EMT750 power supply is a 750 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 62 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.28%. This reduces energy loss and ensures stable operation under load.Single +12 V rail and DC-to-DC conversionThe use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements.High efficiency and 80 PLUS Bronze certification80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.28% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation.Active PFC and power stabilityThe power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components.High-quality components and Japanese capacitorsJapanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit.Quiet and intelligent coolingA 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow.Comprehensive system protectionThe DarkFlash EMT750 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions.Low power consumption in standby modeThe EMT750 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation.Wide compatibilityThe power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT750 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases. ManufacturerDarkflashModelEMT750ColorBlackTotal power750 WPower consumption in standby modeLess than 0.5 WDimensions140 × 150 × 86 mmEfficiency certification80 PLUS BronzeFan bearing typeFDBInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CWeightApprox. 1.86 kgCooling120 mm FDB fanProtectionsOver Voltage Protection (OVP), Over Power Protection (OPP), overcurrent (OCP), short circuit (SCP), overheating (OTP), and undervoltage (UVP)Compatible processorsIntel, AMD
DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD
Fan speed (max): 1800 MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 4 Number of power supply connector 4-pin 12V: 0 8-pin 12V power connectors: 0 Number of power supply connector 4+4-pin 12V: 1 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 2 PCI-E 8-pin power connectors: 0 Dimensions: 150 x 86 x 140 mm
