DarkFlash PMT1050 computer power supply (black)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorBlackTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), under voltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDBlack DarkFlash power supply with ventilation grille against a geometric pattern and yellow stripesSide of the DarkFlash power supply with visible modular sockets and inscription on a dark background
DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD
Fan speed (max): 1800 MOLEX power connectors: 6 Floppy power connectors: 1 SATA power connectors: 5 Number of power supply connector 4+4-pin 12V: 1 Number of power supply connectors PCI-E 6 +2 pin: 2 Dimensions: 150 x 86 x 140 mm
AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 24VDC 1,5A juures; Pass LPS Ülimalt õhuke: ainult 35 mm lai Universaalne vahelduvvoolu sisend Koormuseta energiatarbimine
AC-DC Ultra slim DIN rööpmel toiteallikas; sisendvahemik 85-264VAC; väljund 12VDC 4,5A; läbib LPS-iUltra Slim: ainult 52,5 mm lai Universaalne vahelduvvoolu sisend No load energiatarbimine
The SteelPower Series from Chieftronic brings many of the well-received and proven upmarket features and components from the PowerPlay series into the mainstream gamer's market. Gamers can now benefit from the tight voltage regulation and low ripple thanks to the use of half-bridge LLC converters with DC-DC technology as well as premium Japanese capacitors in combination with 80PLUS Bronze efficiency and fully modular cable management. The design of the PSU comes in a rugged understated look.
Introducing the MWE Bronze V3 230V, the evolutionary next step in Cooler Master power and the ATX 3.1 upgrade to our MWE Bronze V2 PSU. With features such as 80 Plus Bronze efficiency, a DC to DC + LLC circuit design, and a quiet HDB fan cooling, the V3 provides valuable performance in multiple dimensions. Several changes and additions improve the overall user experience. Together, these design choices deliver an advanced PSU that is highly efficient and reliable. With an embossed cable, exceptional temperature resilience and a 5 year warranty, the MWE Bronze V3 will evolve your machine.
The Lindy multi-country power supply is a regulated and suitable solution for powering connected equipment which require an output voltage and amperage up to 12 V 1.25 A. The included UK, EU, US and AUS adapters allow for global use of the power supply, while a standard DC jack ensures simple fitting with compatible devices.
!WITHOUT CABLES! Powerful ATX 3.0 power supply with 1000 watts, highest efficiency with 80 PLUS Platinum, 83 amps single rail, fully modular design, efficient 135mm fan
The Lian Li EDGE 80 PLUS Platinum Power Supply is a high-performance PSU designed for demanding systems. With 1300 watts of power, it supports PCIe 5.1 and ATX 3.1 standards, ensuring compatibility with the latest components. This power supply is 80 PLUS Platinum certified, offering exceptional energy efficiency. L-Shape design for dual chamber case 80 PLUS Platinum Efficiency Built-in USB expantion hub with 4 internal USB 2.0 headers Integrating German EPCOS bulk capacitors In-house R&D 12V-2×6 alloy copper soldered terminals ATX 3.0/3.1 compliant PSU Full modular sleeved cable with cable comb MB/CPU/GPU connectorsINNOVATIVE L-SHAPE DESIGN Engineered specifically for dual-chamber chassis such as the LIAN LI O11 series, the EDGE PSU’s L-shape design is ideal for vertical installation at the second chamber.This unique form factor reorients the connectors outward, simplifying cable management and ensuring a clean, organized build.POWER AND USB HUB TWO-IN-ONE The full Edge Series integrates 4 × 9-pin internal USB expansion, which function as a 1-to-7 USB hub, simplifying the connection of USB devices such as UNI fans, Strimer Plus, and RGB controllers to the motherboard. All USB ports features uninterruptible power, allowing connected devices to remain operational when the PC is turned off, as long as the power supply is on. Each port supports a rate current of 500mA.1. CONNECT TO USB DEVICESPort #1 provides 1 USB signal, while port#2/3/4 each provide 2 USB signals. This allows for up to 7 USB devices when using a 1-to-2 splitter cable at port #2/3/4 .Note: Due to the TL controller’s 2-in-1 USB design to support both TL LCD and TL, it is recommended to connect it to port#2/3/4. Other LIAN LI or third-party controllers can be connected to any port.2. CONNECT TO MOTHERBOARD Offers two options for motherboard signal connection to accommodate different configurations.STANDARD INTERNAL USB CONNECTOR Connect to the motherboard in the main chamberUSB TYPE A CONNECTOR Connect to the rear IO of the motherboardPLATINUM CERTIFIED Achieving the 80 PLUS, Cybenetics and PPLP Platinum certifications, the EDGE Series ensures top-tier energy efficiency, reducing power consumption and heat output while delivering reliable, stable performance.ATX 3.0 AND 3.1 COMPLIANT Fully compliant with ATX 3.0 and 3.1 standards, the EDGE Series meets the latest power supply specifications, ensuring compatibility with the newest components and motherboards.STABLE DUAL COLOR PCIE5.1 CONNECTOR LIAN LI’s in-house R&D developed 12V-2×6 alloy copper soldered terminals for secure and efficient power delivery, enhancing system stability and performance. Dual-color shell for confirming secure connectionsAdded gold plating to prevent short circuitsSoldered wire and terminal connection for current stabilityIncreased copper thickness to 0.25mm for lower contact resistance INDUSTRIAL GRADE CAPACITORS The EDGE PSU integrates the German EPCOS capacitors, offering compact, robust performance with higher tolerance to temperature and harsh environments. Featuring LLC topology and Active PFC, the EDGE PSU enhances efficiency, reduces heat generation, and ensures cleaner, more reliable power delivery.COOL IN SILENCE Designed for optimal performance, the open style mesh facilitates excellent heat dissipation for internal components. This feature is especially beneficial for the 120 MM PWM fan, which operates efficiently with minimal noise, ensuring the system stays cool and quiet even under heavy loads.Edge 1300W Fan Acoustic Noise (Ambiance temperature 25℃)PREMIUM BRAIDED SLEEVED CABLES FOR A CLEAN BUILD The power supply units come equipped with 20+4pin, CPU, PCIe 6+2pin, and 12V-2×6 cables featuring premium braided sleeves. These cables are designed with easy-to-adjust cable combs, ensuring very clean curves and cable runs for an aesthetically pleasing and organized dual chamber build.Comprehensive SATA Power Solutions Included with the EDGE PSU series are several SATA power cables to suit various needs: Y-Type SATA Cable: Perfect for connecting drives and controllers located in different areas, providing flexibility and reducing cable clutter.Close-Type SATA Cable: A 300mm long cable with 15mm spacing between power connectors, making it easy to attach devices while maintaining a tidy setup.Note: Please do not connect 850W or 1000W cables to a 1300W power supply unit. Using incompatible cables can lead to serious damage to your components and may void your warranty.COMPREHENSIVE CONNECTORS The modular cables are measured precisely for the dual chamber chassis to avoid bulkiness and ensure efficient cable management.10 YEARS WARRANTY EDGE series are crafted with high-quality materials for superior performance and longevity. Enjoy peace of mind with our extensive 10-year warranty.
Die ADVAN GM-Serie ist sowohl mit der neuesten ATX 3.1-Verordnung kompatibel, um bis zu 200 % Leistungsausweitung zu unterstützen, als auch mit der neuen Schnittstelle des PCIe 12V-2x6 Connectors, so dass auch bei zukünftigen Hardware-Upgrades Spitzenleistung gewährleistet ist. LLC-Resonanzwandler-Topologie mit Synchron-Gleichrichter sorgen für eine Reduzierung der Schaltverluste, Steigerung des Wirkungsgrads und Regelung der Ausgangsspannung unter Lastbedingungen. Ein 120 mm großer Hydrauliklüfter (HYB) reduziert die Lüftergeräusche auf ein Minimum und bietet gleichzeitig maximale Kühlleistung.
