Die ADVAN GM-Serie ist sowohl mit der neuesten ATX 3.1-Verordnung kompatibel, um bis zu 200 % Leistungsausweitung zu unterstützen, als auch mit der neuen Schnittstelle des PCIe 12V-2x6 Connectors, so dass auch bei zukünftigen Hardware-Upgrades Spitzenleistung gewährleistet ist. LLC-Resonanzwandler-Topologie mit Synchron-Gleichrichter sorgen für eine Reduzierung der Schaltverluste, Steigerung des Wirkungsgrads und Regelung der Ausgangsspannung unter Lastbedingungen. Ein 120 mm großer Hydrauliklüfter (HYB) reduziert die Lüftergeräusche auf ein Minimum und bietet gleichzeitig maximale Kühlleistung.
Die ADVAN GM-Serie ist sowohl mit der neuesten ATX 3.1-Verordnung kompatibel, um bis zu 200 % Leistungsausweitung zu unterstützen, als auch mit der neuen Schnittstelle des PCIe 12V-2x6 Connectors, so dass auch bei zukünftigen Hardware-Upgrades Spitzenleistung gewährleistet ist. LLC-Resonanzwandler-Topologie mit Synchron-Gleichrichter sorgen für eine Reduzierung der Schaltverluste, Steigerung des Wirkungsgrads und Regelung der Ausgangsspannung unter Lastbedingungen. Ein 120 mm großer Hydrauliklüfter (HYB) reduziert die Lüftergeräusche auf ein Minimum und bietet gleichzeitig maximale Kühlleistung.
High-performance fully modular ATX-3.1 power supply from Montech1,000W rated power for your high-end components80-PLUS and Cybernetics Platinum certification for absolute efficiency1x 12VHPWR connection for high-end graphics cardsFan with fluid dynamic bearingMontech Titan PLA: ATX-3.1 Power Supply for Your Gaming PCThe Montech Titan PLA provides you with 1,000W rated power, more than enough to power even the most powerful gaming hardware. In particular, PCIe 5.1 support ensures better security and performance for your graphics card.Additionally, the power supply has an 80-PLUS and Cybernetics Platinum certificate. At 50% load, it achieves an efficiency of up to 90%. This leads to less heat, less fan noise, and significantly higher reliability.Optimal CoolingThe ATX form factor allows for installation in most cases. Inside, there is a 135-mm fan with a fluid dynamic bearing, ensuring long life while generating lower noise levels.Connection OptionsOn the back of the power supply, you will find all the necessary connections for your hardware components. These include connections for powering the motherboard, CPU, and graphics card.
MODECOM Volcano HEX 750W Power SupplyThe Volcano Hex series of Volcano power supplies is designed based on the ATX 3.1 and PCI Express 5.1 standards, ensuring support for advanced and demanding hardware solutions on the market. The ATX 3.1/PCIe 5.1 standards meet the requirements of the highest-end graphics cards and pose significant challenges for computer power supplies, as they require support for peak loads up to twice the rated power of the power supply. The Volcano Hex is a power supply platform built using the Half-bridge LLC Resonant Converter topology, with a DC-DC circuit for the 3.3V and 5V lines, ensuring stable voltages regardless of the power supply's load.Supports demanding computers and those yet to be developed.Computers with powerful graphics cards and processors require a power supply that can handle high power demands. The MODECOM Volcano Hex is built according to ATX 3.1 and PCIe 5.1 standards, ensuring stable operation even in the most demanding scenarios, such as gaming and advanced programs. It delivers 750 watts, which should easily handle new computer systems.Certified EfficiencyThe Volcano Hex supports input voltages ranging from 100V to 240V and ensures high energy efficiency, meeting the requirements of the 80Plus Gold standard. Certification was granted by Cybenetics, which tests power supplies over a much wider range than the 80Plus standard.A Quieter and Cooler Computer Thanks to Clever DesignThe Volcano Hex power supply is designed to avoid overheating and noise. It features a large, quiet fan (14 cm) that effectively cools the system, and thanks to a special bearing, it operates very quietly even when playing demanding games. Additionally, the use of flat cables and the ability to detach them allow for improved airflow within the case. What does this mean for you? Lower computer temperatures Convenient and tidy cable management You gain the ability to build your computer in the most aesthetically pleasing way possible. Japanese capacitorsWe use only the highest quality components. The MODECOM Volcano Hex power supply features exclusively Japanese capacitors, ensuring stability, reliability, and long life.Strong 12V railModern computer systems require power supplies to deliver the highest possible power, primarily through the 12V rail. Our power supplies are no exception, and the maximum load on this rail corresponds to almost 100% of the rated power that can be delivered to devices using 12V (i.e., the computer's CPU and GPU).Stable operation is a pleasureThe MODECOM Volcano Hex power supply is designed to ensure your computer runs smoothly and restarts without interruptions, even if you're gaming, streaming, or editing videos. Voltages are stable and predictable, which means: Your computer won't freeze. Your components are protected to the highest possible standard. You can play or work without constantly clicking quick saves. The kit includes cables that you can, but don't have to, connect to the power supply. If you don't have multiple SSDs/HDDs, you can leave some of the power cables in the box and use them only after you buy additional drives. The same applies to cables for an additional graphics card or other components. Modular Power Supply Cables: 1 x MB: 20+4P (Length: 600 mm) 1 x SATA+SATA+SATA (Length: 500+150+150 mm) 1 x SATA+SATA+SATA (Length: 500+150+150 mm) 1 x IDE+IDE+IDE+FDD (Length: 500+150+150+150 mm) 1 x CPU: P8 (4+4) (Length: 700 mm) 1 x CPU: P8 (4+4) (Length: 700 mm) 1 x PCI-E: P(6+2)+P(6+2) (Length: 550+120 mm) 1 x PCI-E: P(6+2)+P(6+2) (Length: 550+120 mm) 1 x 12V-2x6 600W (Length: 550mm) Flat cables and modular cabling provide flexibility and improved airflow.Volcano Hex power supplies feature fully modular cabling, reducing the amount of cabling inside the computer case. This improves airflow and facilitates neat cable management. The cable harnesses used to connect the power supply are flat, further enhancing the overall appearance of the assembled computer system. Besides convenience and aesthetics, they provide all the connectors required for ATX 3.1 and PCIe 5.1 computer systems, and the diameter of the cables used safely delivers power to the components being powered.
DarkFlash PMT1050 computer power supply (white)The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and power stabilityThe power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components.High-quality components and Japanese capacitorsThe power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1050 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manualManufacturerDarkflash ModelPMT1050ColorWhiteTotal power1050 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMDWhite computer power supply on a dark background with yellow stripesWhite DarkFlash power supply with marked ports on a dark background
DarkFlash PMT1250 computer power supply (black)The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases.ATX 3.1 and full PCIe 5.1 readinessThe power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more!High efficiency and 80 PLUS Gold certification80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours.Single +12 V rail and DC-to-DC conversionThe use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card.Active PFC and high-quality componentsThe device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply.Quiet and intelligent coolingA 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load.Advanced system protectionDarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things.Modular cabling and compatibilityThe power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with the latest Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards. It also works well in configurations with multiple GPUs. What's more, its small dimensions of 140 × 150 × 86 mm allow for easy installation in most computer cases.IncludedDarkFlash PMT1250 power supply20+4-pin motherboard power cable (600 mm) ×14+4-pin CPU power cable (700 mm) ×26+2-pin PCI-E cable (600 mm) ×26+2-pin → 6+2-pin PCI-E cable (600 + 150 mm) ×1SATA + SATA + SATA + P (450 + 150 + 150 + 150 mm) ×2SATA + SATA + P + P cable (450 + 150 + 150 + 150 mm) ×1PCI-E 5.1 (12V-2×6) 16-pin 600 W cable (650 mm) ×1Mounting screwsCable tiesBagProtective glovesUser manual ManufacturerDarkflashModelPMT1250ColorBlackTotal power1250 WPower consumption in standby modeLess than 0.5 WPower supply dimensions140 × 150 × 86 mmEfficiency certificate80 PLUS GoldFan bearing typeHydro bearingInput voltage100-240 VInput frequency50-60 HzCapacitorsJapanese 105°CTopologyActive PFC, Half Bridge LLC, SRC, DC to DCCooling120 mm Hydro Bearing fanProtectionsOver voltage protection (OVP), over current protection (OCP), overload protection (OPP), short circuit (SCP), overheating (OTP), undervoltage (UVP), no load protection (NLP)Power Good signal100-250 msHold-up time≥16 ms at 100% loadCompatible processorsIntel, AMD
MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 Number of power supply connector 4-pin 12V: 1 8-pin 12V power connectors: 0 Number of power supply connector 4+4-pin 12V: 0 PCI-E 6-pin power connectors: 1 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Dimensions: 63 x 125 x 101 mm Weight: 0.843 Power supply: +3.3V 18AMaximum 97 W+5V 15AMaximum 240W
The Coba CES-350B 80+ is specifically designed for the demands of assemblers. As a mere bulk product it saves the cost for the retail packages which naturally has a positive effect on the final price.For the same reason Inter-Tech choose a plain design to place the main priorities on the technical aspects. Whether it is the super silent 120mm fan, the big numbers of connectors (P4+4, PCI-Express etc.) or the two separated 12V-lines, Coba CES-350B 80+ will satisfied all demands.To prove its high quality standards the power supply has fulfilled all requirements for the 80PLUS® certification. That means that a high efficiency of the power supply is guaranteed and this is not only good for the environment but also helps to safe your money.Koguvõimsus350 WAC-sisendpinge115 - 230AC-sisendsagedus50 - 60Sisendvool8Maksimaalne sisendvool (110 V juures)+3.3V,+5Vsb,+12V1,-12V,+12V2,+5VVõimsusteguri korrigeerimise (PFC) tüüpAktiivneKombineeritud võimsus (+3,3 V)103 WKombineeritud võimsus (+5 V)103 WMaksimaalne väljundvool (+3,3 V)15 AMaksimaalne väljundvool (+12 V 1)15 AMaksimaalne väljundvool (+12 V 2)15 AMaksimaalne väljundvool (+5 V)12 AMaksimaalne väljundvool (-12 V)0,3 AMaksimaalne väljundvool (+5 Vsb)2,5 AToite kaitsefunktsioonidÜlepinge, Over current, LühisVentilaatori läbimõõt12 cmVentilaatorite arv1 ventilaator(id)Ventilaatori paiknemineKülgJahutuse tüüpAktiivneEmaplaadi toitepistmik20+4 pin ATXVälisseadmete (Molex) toitepistmikud (4 kontakti)2SATA-toitepistmike arv3PCI Expressi toitepistmikud (6 + 2 kontakti)1CPU-toitepistik (4 + 4 kontakti)JahATX-toitepistmik (20 + 4 kontakti)JahKujutegurATXOtstarvePCMüratase25 dBATX-versioon2.3Sisse/välja lülitiJahToote värvHõbeLaius150 mmSügavus140 mmKõrgus86 mm80 PLUS sertifikaat80 PLUS BronzeRoHS-vastavusJah
MOLEX power connectors: 4 Floppy power connectors: 1 SATA power connectors: 3 Number of power supply connector 4-pin 12V: 1 8-pin 12V power connectors: 1 Number of power supply connector 4+4-pin 12V: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 2 PCI-E 8-pin power connectors: 0
Introducing the MWE Bronze V3 230V, the evolutionary next step in Cooler Master power and the ATX 3.1 upgrade to our MWE Bronze V2 PSU. With features such as 80 Plus Bronze efficiency, a DC to DC + LLC circuit design, and a quiet HDB fan cooling, the V3 provides valuable performance in multiple dimensions. Several changes and additions improve the overall user experience. Together, these design choices deliver an advanced PSU that is highly efficient and reliable. With an embossed cable, exceptional temperature resilience and a 5 year warranty, the MWE Bronze V3 will evolve your machine.
Powerful ATX 3.1 power supply with 850 watts, efficient Gold certification, cables with individually textured strands, silent hybrid mode at the push of a button, fully modular cable management, includes 12V-2x6 cable
Powerful ATX 3.1 power supply with 750 watts, efficient Gold certification, cables with individually textured strands, silent hybrid mode at the push of a button, fully modular cable management, includes 12V-2x6 cable
The G12 GC Series is available in the standard ATX Form Factor and in wattages that are most common for a PC system. The Seasonic G12 GC-Series achieves 80 PLUS® Gold standard of providing at least 87%, 90%, and 87% power usage efficiency at 20%, 50%, and 100% operating loads, respectively. This efficiency, combined with Active Power Factor Correction, enables the G12 GC series power supplies to lessen energy waste, which translates into savings on the costs of energy for its users. In addition to being greatly efficient, the G12 GC units utilize the LLC resonant converter design, and the industry’s leading Smart and Silent Fan Control (S2FC).
ATX power supply RAPTOR 700W, BRONZE 80+, Single Rail, DC-DC RAPTOR 700W BRONZE 80+, DC-DC, Single Rail Premium ATX power supply Huge power reserve Thanks to the advanced design and the highest quality components, Raptor power supplies have a huge power reserve. In the RAPTOR 700W power supply, 700W is available on the +12V line alone (dedicated to powering the processor and graphics card, among other things), in addition to a total of 105W on the +3.3V and + 5V lines and 16.1W on the remaining lines. So the maximum power significantly (approx. 821W) exceeds the rated power of 700W. Efficiency above 85% High efficiency - over 85% at a load of 50% power, over 82% at a load of 20% and 100% power. This means less heat production and more efficient cooling, which translates into quiet operation. High efficiency reduces energy consumption, which in turn reduces equipment operating costs. Active PFC High-quality power supplies use active PFC, which is more effective than the passive PFC used in standard power supplies. Active PFC systems are specialized electronic circuits that adapt to the load and to the conditions in the electrical network, and are therefore able to correct the phase shift efficiently regardless of the operating conditions of the power supply. DC-DC Architecture Power supplies with "DC / DC" technology convert +12V DC in the main transformer and then use it as a basis for +3.3V and +5V - unlike conventional models, which generate all currents simultaneously. Only two additional converters reduce the voltage from +12V to +5V and +3.3V. This increases the efficiency of the entire power supply and also creates a strong +12V line, which is directly used by the most important components such as the processor and graphics card. In addition, it increases the stabilization of individual voltages and reduces to a minimum the impact of current spikes of a given voltage on other voltages. High-quality capacitors A high-quality main capacitor 105`C / 390° uF (in the RAPTOR 700 model) improves the durability of the power supplies and ensures the stability and reliability of the RAPTOR series of power supplies. In the converters reducing the voltage from +12V to +5V and +3.3V, polymer capacitors are used, which are characterized by very low losses. Single +12V RAIL The design with a single +12V rail ensures stable output current at high load and, above all, more optimal power distribution for individual computer components. This is especially important for units with efficient processors and graphics cards. Power cable included All REBELTEC power supplies are sold with a mains power cable, so you don't have to buy it separately - you save time and money. Non-modular design with FLAT BLACK flat cables The RAPTOR series is supplied with soft black FLAT BLACK cables, which allow for easy cable installation and ensure optimal voltage in the system and also cause. that the cables can be arranged more easily and are less visible, which is important in transparent housings. SPECIFICATION: The power supply meets the requirements of 80PLUS BRONZE standards Stable continuous power of 700W - maximum power on the 12V line is as much as 700W, combined on the 5V & 3.3V lines is 105W active PFC (>0.9) DC-DC architecture - ensures high voltage stabilization SINGLE RAIL 12V - optimal power distribution for key components efficiency >82% at 20% load efficiency >85% at 50% load efficiency >82% at 100% load ERP2013 compliance 12cm fan (ultra silent) thermally controlled operating speed black housing FLAT BLACK cables, thanks to which they are easy to arrange in the housing and remain invisible with transparent housings MTBF >100 000h w complete with 16A/250V cable 1.2m 3x0.75mm2 Size: 150 x 140 x 86 mm Weight: 1375g EAN code: 5902539602272 Secondary side wiring: 3x Molex connector (on 3 cables 80cm long, flat black, shared with SATA) 6x SATA connector (on 3 cables 50-65cm long, flat black) 1x CPU 12V 4+4pin connector (55cm long cable, flat black) 2x PCI-E 6+2pin connector (50+15cm long cable, flat black) 1x ATX 20+4pin pin connector (50cm long cable, flat black) Protections: OVP - protection overvoltage SCP - short circuit protection OPP - overload protection SIP - surge current protection UVP - undervoltage protection OTP - overheating protection
