The Eaton 9E UPS gives IT managers an easy way to manage the power in their data center, without having to worry about cost, space or downtime. Developed specifically for IT managers, the 9E confronts typical data center problems head on. It addresses ROI, energy costs, remote management, and efficiency... giving you more time to focus on other important data center issues.
• 1200 W 100 - 240 V 50/60 Hz • Emaplaadi toitepistmik: 20+4 pin ATX • PC ATX 80 PLUS Platinum • Aktiivne 14 cm 0 - 2100 RPM • Must be quiet! POWER ZONE 2 | 1200 W, 1200 W, 100 - 240 V, 1270 W, 50/60 Hz, 15 A, 7,5 A
SNMP Card for UPS - Expansion for Armac Uninterruptible Power Supplies The SNMP network card is a communication accessory that extends the capabilities of compatible Armac-Energy UPS devices, providing full real-time management and monitoring from anywhere via a web browser or SNMP manager. With integrated network access, users can schedule UPS shutdowns, startups, or restarts, view basic battery status, and monitor key parameters-all without installing additional software. The solution supports event logs, self-test schedules, email notifications, SNMP traps, and custom alarm thresholds, offering centralized control over the entire uninterruptible power system. Industrial-Class Modbus 485 Poll/Slave & Modbus TCP/IP Connectivity Modbus RTU (485): The card can operate as Poll (master), allowing it to query up to 8 external sensors/devices, or as Slave, providing UPS parameters to PLC controllers. Modes are switchable but mutually exclusive. Flexible Configuration: Users can set baud rate, parity, device address, and function independently of the mode. In Poll mode, the exact registers to retrieve data from are selectable. Modbus TCP/IP Protocol: Encapsulates RTU frames in Ethernet packets (port 502, changeable), enabling remote access to UPS parameters where a direct physical connection is not feasible. This allows connection to end devices using Modbus TCP/IP or to devices requiring a physical port via a TCP/IP-to-RTU converter. SNMPv1 / SNMPv2c / SNMPv3 Basic - Network Management for Multiple UPS Units The SNMP agent supports UPS-MIB (RFC1628) and Armacs private enterprise implementation (PPC), enabling comprehensive monitoring of UPS devices and environmental sensors (EMD) connected by the user. SNMP TRAP allows automatic notifications of alarms in v1 and v2c, while a simple web-based UPS control panel provides basic commands (10 s test, bypass on/off, buzzer off). SNMP v3 provides basic login authentication with username and password. Importantly, all Armac UPS systems are equipped with overload protection. If the UPS is overloaded during normal operation, it safely disconnects the connected devices, enhancing both safety and user convenience. Compliance with RFC 1628 UPS-MIB RFC1628 defines a standardized set of objects (OIDs)-covering UPS states, operational parameters, battery status, alarms, and tests. The Armac card supports all critical OIDs and extends default resolution, providing values with decimals (mV, 0.1 Hz, 0.01°C) for precise monitoring of load and temperature without additional PPC implementation. SMTP with SSL, NTP, and DNS - Secure Notifications MTP (TLS/SSL, STARTTLS): Sends alerts to multiple email accounts with authentication. NTP: Automatic time synchronization ensures SNMP and CSV logs have consistent timestamps across devices. DNS: Hostname resolution. Other Features and Functionalities Wake On LAN: Remote server/PC power-on after power restoration or UPS battery operation. Task Scheduler: Cyclical UPS on/off, battery tests, and calibrations. Configurable Alarm Thresholds: Voltage, temperature, humidity, and battery runtime. Remote Command Execution: Allows control of any device using SSH or Telnet, without extra software, e.g., shutting down a server or running a user-defined script. The SNMP card executes dedicated commands for each event type. Event and Parameter Logging: Exportable in CSV via a persistent link. Easy Firmware Updates: Via web interface. Why Armac-Energy? Armac focuses on reliability, open standards, and seamless integration with existing IT and automation infrastructure. The Armac UPS SNMP card is a compatible network management card (NMC) plug-in that allows remote control of the UPS and monitoring of critical data in a unified management environment accessible through multiple interfaces. It is ideal for installers, administrators, and end users who, in line with Armacs mission We create good energy, want to combine power protection with intelligent analytics.
Darkflash PMT 80 Plus Gold 750W computer power supply.The Darkflash PMT is an excellent choice for demanding gamers, remote workers, or computer enthusiasts. It supports 12VHPWR connector compatible with PCIe 5.1 and can handle momentary power spikes - ideal for newer graphics cards. With 80 Plus Gold certification and advanced safety features, it guarantees high efficiency and safe operation. It offers a stable 750W power supply on a single +12V line, supported by a DC-DC circuit, and Japanese capacitors ensure long life. The modular design simplifies installation and improves airflow, while the intelligent cooling system won't disturb your peace of mind during operation. Darkflash PMT is a reliable base for any gaming or professional setup.Thoughtful designThe direct 12VHPWR connector allows the power supply to deliver up to 600 watts of power via a single cable - fully PCIe 5.1 compliant. The design also supports instantaneous power surges of up to three times the rated value, making it an ideal choice for the latest graphics cards and systems with high power demands. The PSU's interior conceals top-quality components, including Japanese capacitors with improved thermal durability. Thanks to them, the power supply works reliably even in harsh conditions, and its durability and stability exceed standard expectations. The entire unit has been manufactured with attention to detail and rigorous quality control.Less wear, more reliabilityDarkflash PMT has been awarded the prestigious 80 Plus Gold certification, which confirms its high energy efficiency - up to 91%. This reduces energy loss, reduces heat generation and contributes to lower operating costs. The unit also offers seven layers of protection, including overvoltage, overload, overheating, short-circuit, under- and over-voltage, and no-load operation. In addition, its industrial level of surge protection (4KV) protects against lightning and sudden voltage spikes. The power supply consumes less than 0.5W in standby mode, meeting the requirements of the ErP Lot 3 2014 directive. This is a power supply that allows you to build an efficient, safe and energy-saving work environment.Stable power, regardless of intensityThe power supply offers a full 750 watts of power on a single independent +12V line, ensuring reliable power to all components - especially the CPU and graphics card. This design is perfect for sudden spikes in power demand, ensuring continuous stability for the entire system. To increase this stability, there is also a high-performance DC-DC conversion circuit, which enables precise voltage delivery to individual components, and increases the efficiency and reliability of the entire power supply. This ensures that your computer runs smoothly even under heavy load.A reliable foundation for any configurationDarkflash PMT is a power supply designed with enthusiasts and professionals in mind. Offering full ATX 3.1 support, top performance, certified efficiency and exceptional stability, it provides a reliable foundation for any modern computer platform - whether for work or gaming. Meanwhile, thanks to an active PFC circuit with an efficiency of up to 99%, it ensures near-perfect matching of the power drawn from the grid. This reduces unnecessary losses, minimizes electromagnetic interference emissions and allows for more stable power supply to components.Quiet operation thanks to intelligent coolingThe power supply is equipped with the AUTOFAN SPEED MODE intelligent cooling system. The fan starts up only when it reaches 30% of the load, which makes the unit operate practically silently at low power demand. However, when intensive ventilation is needed, the advanced design of the openings (a square pattern on top and a honeycomb structure on the back) effectively dissipates heat, ensuring optimal temperatures inside the case.Modular design and convenient installationWith full modularity, you connect only the cables you really need. Flexible, flat cables not only simplify installation, but also improve air circulation in the case. Compact dimensions (140 x 150 x 86 mm) make the power supply fit easily into most standard ATX cases. The Darkflash PMT power supply is fully compatible with the latest Intel and AMD processors, as well as graphics cards supporting NVIDIA NVLink/SLI and AMD CrossFire technologies. The 6+2 pin PCI-E connectors allow powering multiple processors, making this model an ideal choice for gaming PCs and workstations.IncludedPower supplySet of x8 modular cablesAccessory bagSet of cable ties x5Mounting screws x4Work glovesUser manual ManufacturerDarkflashModelPMT750 Black(Gold)Size140 × 150 × 86 mmPerformance certification8OPLUS GOLDInput voltage100-240VInput frequency50-60HzTopologyActive PFC, half bridge LLC, SRC, DC to DCProtectionOver voltage (OVP), over current (OCP), over load (OPP), short circuit (SCP), overheat (OTP), under voltage (UVP), zero load (NLP)Signal of good power supply100-250msHolding time≥16ms at 100% load
Die Anker SOLIX tragbare Powerstation C300X DC versorgt Geräte unterwegs mit 300 Watt. Der 288Wh-Akku unterstützt schnelles Laden mit 140 Watt USB-C PD 3.1 in beide Richtungen. Die tragbare Powerstation C300X DC ist 30% kompakter als vergleichbare Powerstationen. Mit dem Tragegriff oder dem separat erhältlichen Tragegurt ist das Energiebündel bequem zu transportieren. Die ausziehbare Beleuchtung erzeugt ein Umgebungslicht in drei wählbaren Helligkeitsstufen. Der Solareingang unterstützt ein 11V - 28V Solarladegerät mit einem XT-60 Anschluss. Die Powerstation ist z.B. mit den Anker SOLIX 100 Watt oder 60 Watt Solarmodulen kompatibel. Solarpanels laden bis zu 80% in nur 2,5 Stunden. Für schnelles Aufladen lassen sich auch zwei 140 Watt PD USB-C Anschlüsse gleichzeitig verwenden. Der LiFePO4-Akku hält bis zu 3.000 Zyklen, verfügt über eine smarte Temperaturregelung und Stoßfestigkeit. Das im Set enthaltene Anker SOLIX tragbare Solarpanel PS60 ist 40% leichter als vergleichbare Panels. Dank seines ultraleichten Designs lässt es sich bequem mit einer Hand tragen. Das Solarpanel lässt sich auf die Größe eines DIN A4 Blatts zusammenfalten und ist so platzsparend zu verstauen. Das PS60 Solarpanel hält Regen, Staub und Spritzwasser zuverlässig stand und eignet sich ideal für den Außeneinsatz. Die hochwertigen Materialien wie flexibles Fiberglas sorgen für mehr Flexibilität und Abriebfestigkeit. Der Anschluss ist an alle Powerstations mit 11V- 60V MC4-Eingang möglich.
Thermaltake TR2 S 550W. Total power: 550 W, AC input voltage: 200 - 240 V, AC input frequency: 50 Hz. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 60 cm, SATA power cable length: 500 mm. Purpose: PC/server, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS. Product color: Black, Cooling type: Active, Fan diameter: 12 cm. Certification: FCC/ICES/CB/cTUVus
LC Power Super Silent Modular Series LC6750M V3.1 - Strømforsyning (intern) - ATX12V 3.1 - 80 PLUS Gold - AC 100-240 V - 750 Watt - aktiv PFC - hamret sort
The FSP MEGA GM 1200W power supply is a powerful PSU for modern high-end systems. It is fully compatible with the ATX 3.1 standard and supports power excursions of up to 200%, making it ideally suited for current and future hardware. The integrated PCIe 12V-2×6 connector ensures a reliable power supply for high-performance graphics cards. Thanks to FSP MTLC® (Micro Tolerance Load Control) technology, exceptionally stable voltage delivery is achieved with only 1% load regulation. This improves efficiency, system stability, and the reliability of sensitive components—even during rapid load changes and compute-intensive applications.
The PowerWalker AVR 3000SIV/FR is an automatic voltage regulator with Polish output sockets.The AVR has two acceptable voltage ranges: wide (110-280V) and narrow (150-280V). Provides a stable output voltage through the use of a voltage stabilizer that appropriately raises or lowers the voltage to the desired level. The built-in temperature sensor provides protection against overheating. In addition, you can enable the protection delay feature, which will increase the unlock response time from 10ms to 3 minutes.Main features:- compact size- Input voltage can be set- possibility to set protection delay time- Digital display- 2 standard output sockets- Handle on the housing for easy carrying- Built-in temperature sensor protects against overheating
Compact high-end power supply, 1,000 watts output, 80 PLUS Gold & Cybenetics Platinum certified, quiet 135 mm FDB fan with zero-RPM mode, ATX 3.1 & PCIe 5.1 ready, including 12V 2x6-pin connector, Japanese capacitors for long lifespan The APNX MAX G1 is a powerful, fully modular power supply with 1,000 watts – perfect for modern gaming PCs and workstations. It offers quiet operation, high efficiency, and the latest standards for your builds. 1,000 watts for demanding systems – ideal for gaming PCs and creators Quiet operation thanks to a 135mm fan with zero-RPM mode at low loads Modular cable management ensures better airflow and organisation ATX 3.1 & PCIe 5.1 compliance for new GPU generations Efficient and durable – 80 PLUS Gold & Cybenetics Platinum certified APNX MAX G1 1,000W: Performance & compatibility for modern systems With 1,000 watts of output power, the MAX G1 provides ample headroom for high-end graphics cards, powerful processors, and complex builds. Thanks to ATX 3.1 and PCIe 5.1 support, you’re well prepared for upcoming hardware generations – including a secure 12V 2x6-pin connector for current GPUs. Quiet, efficient & durable A 135mm FDB fan with zero-RPM function ensures silent operation at low loads and remains pleasantly quiet even under full load. The 80 PLUS Gold and Cybenetics Platinum certifications demonstrate top energy efficiency. This keeps your system cool and power consumption low – even in standby mode with under 0.25 watts. Modular & space-saving for clean PC builds Thanks to the fully modular design, you only use the cables you really need. This saves space, improves airflow, and makes installation easier – especially in compact cases, as the MAX G1 is particularly short at 140mm depth. High-quality Japanese capacitors additionally ensure long-term reliability.
The ROG Strix 850W Platinum White Edition power supply delivers the top-class performance and unwavering stability that gamers expect. It is equipped with a next-generation GaN MOSFET and features the patented GPU-First Intelligent Voltage Stabilizer, which is designed to provide an even and reliable power flow to the graphics card. The ROG Strix 850W Platinum White Edition also includes the ROG Equalizer, a patented 12V-2x6 PCIe power cable developed to reduce heat stress and keep cable and connector temperatures under control to protect the graphics card. With full ATX 3.1 compliance and a native 12V-2×6 connector, the ROG Strix Platinum Series ensures that your high-end rig has the power to meet any challenge.
Compact high-end power supply, 850 watts output, 80 PLUS Gold & Cybenetics Platinum certified, quiet 135 mm FDB fan with zero-RPM mode, ATX 3.1 & PCIe 5.1 ready, including 12V 2x6-pin connector, Japanese capacitors for long lifespan The APNX MAX G1 is a powerful, fully modular power supply with 850 watts – perfect for modern gaming PCs and workstations. It offers quiet operation, high efficiency, and the latest standards for your builds. 850 watts for demanding systems – ideal for gaming PCs and creators Quiet operation thanks to a 135mm fan with zero-RPM mode at low loads Modular cable management ensures better airflow and tidiness ATX 3.1 & PCIe 5.1 compliance for new GPU generations Efficient and durable – 80 PLUS Gold & Cybenetics Platinum certified APNX MAX G1 850W: Performance & compatibility for modern systems With 850 watts of output power, the MAX G1 provides plenty of headroom for high-end graphics cards, powerful processors, and complex builds. Thanks to ATX 3.1 and PCIe 5.1 support, you are well prepared for upcoming hardware generations – including a secure 12V 2x6-pin connector for current GPUs. Quiet, efficient & durable A 135mm FDB fan with zero-RPM function ensures silent operation at low loads and remains pleasantly quiet even under full load. The 80 PLUS Gold and Cybenetics Platinum certifications attest to the highest energy efficiency. This keeps your system cool and power consumption low – even in standby mode with under 0.25 watts. Modular & space-saving for clean PC builds Thanks to the fully modular design, you only use the cables you really need. This saves space, improves airflow, and makes installation easier – especially in compact cases, as the MAX G1 is particularly short at 140mm depth. High-quality Japanese capacitors also ensure long-term reliability.
