Sealed, maintenance free, lead-acid battery, VRLA type.Designed life - 6-9 years according to Eurobat (5 years @ 25°C), for standby and cycle use.EUROPOWER batteries are the best solution for your problems with power supplying.
Sealed, maintenance free, lead-acid battery, VRLA type, with 5 years designed life (according to Eurobat: 3-5 years - Standard Commercial).Designed for standby use in uninterruptible power supplies (UPS).The internal resistance of this battery is lower than for EP 7 - 12 but container dimensions are the same.That is why EV 9 - 12 has higher capacity and much better constant power and constant current discharge characteristics, especially for short discharge times (5-20 min.)
Sealed, maintenance free, lead-acid battery, VRLA type, with 5 years designed life (according to Eurobat: 3-5 years - Standard Commercial).Designed for standby use in uninterruptible power supplies (UPS).The internal resistance of this battery is lower than for EP 7 - 12 but container dimensions are the same.That is why EV 9 - 12 has higher capacity and much better constant power and constant current discharge characteristics, especially for short discharge times (5-20 min.)
Liebert IntelliSlot Web Card family delivers SNMP, Telnet and web-management capability for enhanced communications and control of Liebert UPS, Power Management or Precision Cooling systems. The card manages a wide range of operating parameters, alarms and notifications, transmitting data over the network.Liebert IntelliSlot Web Card (formerly Liebert OpenComms Web Card and Liebert OpenComms NIC Card) delivers SNMP and Web management to a Liebert UPS, Power Management or Precision Cooling system connected to any 10- or 100-Mbit Ethernet network. The interface provides for remote web or in-the-field firmware upgrade. Alarms and parameters are transmitted over the network using SNMP, email, and SMS text. In addition, Liebert IntelliSlot Web Card w/Adapter supports Modbus.ÜhenduvustehnoloogiaJuhtmega ühendatudHostiliidesSmartSlotParalleelportide kogus1Pistmik(ud)RS-232, DB9F, RJ45Andmeedastuskiirus (maksimaalne)100 Mbit/sToetatud andmeedastuskiirus10/100 MbpsEthernet LANJahSisendpinge12Võimsustarve (tüüpiline)1,75 WToote värvRoheline, HõbeKaal200 gKasutamistemperatuur (T-T)0 - 55 °CHoiustamistemperatuur (T-T)-20 - 60 °CMõõdud (l x s x k)38 x 60,3 x 121 mmVõrgu omadusedEthernet, Fast EthernetPortide hulk2Muud toetatud võrguprotokollidSNMP, HTTP, HTTPS, EMAIL, SMS, TELNETKasutustemperatuur (T-T)32 - 131 °FSuhteline õhuniiskus mittekasutamisel (mitte-kondenseeriv)10 - 90 protsenti
Card chassis provides additional SmartSlots for APC UPSs.UPS Management Peripheral Chassis. Add up to three additional SmartSlot accessories to APC UPSs that have an existing SmartSlot already in use1U rackmountable. Hardware includedOptionally power the unit using a 24V DC adapter (not included)
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
With an efficient electrical design and the EcoControl function (USB models), which automatically disables peripherals when the master device is turned off, the Eaton Ellipse ECO helps you make energy savings of up to 25 per cent compared to previous-generation UPSs.
PowerWalker VFI 1500 LCD With true double-conversion design, PowerWalker VFI 1500 LCD provides powerful and overall protection to your sensitive devices. It can accept wider input voltage for harsh environment. It's perfect protection for your servers and workstations. True double-conversion Output power factor 0.8 Wide input voltage range (110-300 VAC) Input power factor correction 0.98 50/60 Hz frequency converter mode ECO mode operation for energy saving (ECO) Programmable power management outlet Emergency power off (EPO) function Type Online-USV (UPS) Nominal Power (Watt) 1.200 Nominal Power (VA) 1.500 Number of Batteries 3 Max. Überbrückungszeit (100W Last / Min.) 80 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 4x Colour Black Width (mm) 126 Height (mm) 221 Depth (mm) 397 Weight (kg) 14
The DPS-200, DPS-300, DPS-500/500DC, DPS-600, and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. They are external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, and connect to a switch’s internal power supply on the other end. They provide a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device.Redundant Power BackupEach D-Link RPS is equipped with an integrated detection circuit that continuously monitors theswitch’s internal power supply. In the event of a power interruption, the redundant power supply isimmediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from going down due to failure of a single network device power supply.Easy and Flexible DeploymentDeployment of a DPS series device does not require any change in the configuration of the LAN switch. With the exception of the DPS-500DC, each RPS is equipped with a universal internal power supply, and can be connected to any AC power source from 90 V AC to 264 V AC, 47 Hz to 63 Hz through a standard AC power cable. The DPS-500DC provides the same output power as the DPS-500, but connects to a DC power source instead of an AC power source.Rack Mounted Power Supplies: DPS-600/700The DPS-600 and DPS-700 are 19-inch standard-size rack mount power supplies designed to improve flexibility in supporting PoE (Power over Ethernet) equipment. The DPS-700 also supports 1+1 power capabilities. When cascading the DPS-700 with a device’s internal power supply, the power system can provide an additional power budget to the device.Koguvõimsus589 WAC-sisendpinge90 - 264AC-sisendsagedus50 - 60Sisendvool7.5Tõhusus80 protsentiÜleliigse toite (RPS) tugiJahOtstarveVõrgulülitiKeskmine tõrkeintervall (MTBF)624961 hToote värvMustKasutamistemperatuur (T-T)0 - 65 °CHoiustamistemperatuur (T-T)-40 - 85 °CSuhteline õhuniiskus kasutamisel (H-H)5 - 95 protsentiLaius441 mmSügavus199 mmKõrgus44 mmKaal3,7 kg
Original part number BU600E-FR Product name Cyber Power UPS BU600E-FR 360W Producer Cyber Power Class of product UPS Apparent power 600 VA Real power 360 Watt UPS architecture line-interactive Max. time of switching on battery 4 ms Number and type of outlets with power maintenance 3 x French CEE 7/5 (Type E) Input connector type French/Belgian Sustain time with full load no data Sustain time with 50% load no data Input voltage range for main operations 165-280 V Cold start No (AVR) Automatic Voltage Regulation Yes Sine while working on battery no data Communication ports no data Data line surge protection port no data LED Work on battery Sound alarm Battery lowOverloadWork on battery Type of computer case no data Standard accessory no data Software included no data Width 158 mm Height 91.5 mm Depth 240 mm Net weight 3.8 kg Colour Black Additional information Battery quantity: 1
