With an efficient electrical design and the EcoControl function (USB models), which automatically disables peripherals when the master device is turned off, the Eaton Ellipse ECO helps you make energy savings of up to 25 per cent compared to previous-generation UPSs.
PowerWalker VI 1200 - Line-Interactive UPS System 1200VA Line-Interactive UPS 2x Schuko outlets, RJ11/RJ45 Surge Protection USB Connection for monitoring Cold start, built-in boost and buck AVR function Green power function for energy saving PowerWalker VI 1200 is a Line- Interactive UPS which provides high performance and reliable and cost-effective backup power protection. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or SMB (small medium business) application. Super smart charger to shorten charging time Built-in boost and buck AVR Simulated sine wave Auto restart while AC is recovering Off-mode charging Cold start function USB communication port RJ11/RJ45 surge protection Monitoring software included LED Display show UPS status Green function for energy saving Type Line Interactive USV (UPS) Nominal Power (Watt) 600 Nominal Power (VA) 1.200 Number of Batteries 2 Max. Überbrückungszeit (100W Last / Min.) 30 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang 2x IEC-Ausgang 2x Colour Black Width (mm) 139 Height (mm) 195 Depth (mm) 365 Weight (kg) 8,6
PowerWalker VI 1500RT LCD PowerWalker VI 1500 RT LCD is a Line-Interactive UPS with pure sine wave, microprocessor control and designed for fulfilling high quantity power protection demand. This series UPS can be applied to standard 19 rack, and the 2U height design facilities your whole system planning and installation. High Frequency Topology Pure Sinewave Output Output THDV < 3% Selectable Line Sensitive Swappable LCD Direction Extended Run Time Power Management Software Multi Communication Ports Optional SNMP and Relay Card Self-Monitoring and Fault Diagnosis Load Segments Control EPO Connector Type Line Interactive USV (UPS) Nominal Power (Watt) 1.350 Nominal Power (VA) 1.500 Number of Batteries 3 Max. Überbrückungszeit bei Volllast (Min.) 5 Max. Überbrückungszeit (100W Last / Min.) 100 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang No IEC-Ausgang 8x Colour Black Width (mm) 438 Height (mm) 86,5 Depth (mm) 436 Weight (kg) 17,8
PowerWalker VFI 1000C LCD Online UPS (Uninterruptable Power Supply System)With true double-conversion online UPS design, PowerWalker VFI 1000C LCD provides powerful and overall protection to your sensitive devices. It can accept wide input voltage for harsh environment. It offers full protection for critical devices such as sensitive servers, network/telephone communication systems as well as for industrial applications.Features:True double-conversionPure sine wave outputMonitoring software includedOutput power factor 0.8Wide input voltage range (110-300 VAC)Input power factor correction 0.9950/60 Hz frequency converter modeECO mode operation for energy savingIntelligent fan controlSmart battery charger to extend battery lifeOptional: SNMP module, Dry contact AS/400 card, Modbus Card, MBS, ATS Type Online-USV (UPS) Nominal Power (Watt) 800 Nominal Power (VA) 1.000 Number of Batteries 2 Max. Backup Time at Full Load (min.) 7 Max. Backup Time (100W Load / Min.) 50 Display LCD Display Warning Message Visual / Audible USB 1x USB-B IEC-Out 3x Colour Black Width (mm) 282 Height (mm) 145 Depth (mm) 220 Weight (kg) 9,8
PowerWalker VFI 3000C LCD Online UPS (Uninterruptable Power Supply System)With true double-conversion online UPS design, PowerWalker VFI 3000C LCD provides powerful and overall protection to your sensitive devices. It can accept wide input voltage for harsh environment. It offers full protection for critical devices such as sensitive servers, network/telephone communication systems as well as for industrial applications.Features:True double-conversionPure sine wave outputMonitoring software includedOutput power factor 0.8Wide input voltage range (110-300 VAC)Input power factor correction 0.9950/60 Hz frequency converter modeECO mode operation for energy savingIntelligent fan controlSmart battery charger to extend battery lifeOptional: SNMP module, Dry contact AS/400 card, Modbus Card, MBS, ATS Type Online-USV (UPS) Nominal Power (Watt) 2.400 Nominal Power (VA) 3.000 Number of Batteries 6 Max. Backup Time at Full Load (min.) 7 Max. Backup Time (100W Load / Min.) 240 Display LCD Display Warning Message Visual / Audible USB 1x USB-B IEC-Out 4x Colour Black Width (mm) 190 Height (mm) 318 Depth (mm) 421 Weight (kg) 27,6
A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn.AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment.Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status.Line- Interactive UPS are designed for medium cost application with moderate load levels- 650VA Line-Interactive UPS- 4x IEC Outlet, RJ-11 (in/out)- USB Connection for monitoring- Cold DC start and AVR function- Green Power Function for energy savingColour blackDevice Type Standalone UPSPower Rating 650 VA / 360 WattInput Voltage 170-280 VBuffering TimeFull Load: 1 minute(s)Half Load: 6 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 4x IECconnected to Battery NoProtectionLine Protection: 1x RJ-11Alert Messagesoptical: LED-Anzeige for sichtbare StatusanzeigeOperating TemperatureOutput V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 100x143x279 mmWeight 4.4 kg
A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn.AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment.Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status.Line- Interactive UPS are designed for medium cost application with moderate load levels- 800VA Line-Interactive UPS- Pure Sine Wave output power- 2x Schuko Outlet, RJ11/RJ45 (in/out), LCD display- USB Connection for monitoring- Cold DC start and AVR functionColour blackDevice Type Standalone UPSPower Rating 800 VA / 480 WattInput Voltage 162-290 VBuffering TimeFull Load: 1 minute(s)Half Load: 5 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 2x Schutzkontaktconnected to Battery NoProtectionLine Protection: 1x RJ-11/RJ-45Overvoltage Protection: YesAlert Messagesoptical: LCD-Display for Status-AnzeigeOperating TemperatureCharging time to 95% (at half load) 4 hour(s)Output V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 328x100x145 mmWeight 6 kg
PowerWalker VI 8 50 SE LCD provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ - 11 surge protection. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application.Colour blackDevice Type Standalone UPSPower Rating 850 VA / 480 WattInput Voltage 170-280 VBuffering TimeFull Load: 1 minute(s)Half Load: 6 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 2x Schutzkontaktconnected to Battery NoProtectionLine Protection: 1x RJ-11Overvoltage Protection: YesAlert Messagesoptical: LCD-Display for sichtbare StatusanzeigeOperating TemperatureOutput V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 143x100x290 mmWeight 5.2 kg
PowerWalker AVR 1000 is a voltage regulator which accepts wide input voltage range (180-264VAC). It provides stable output voltage through boost and buck stabilizer. The built-in thermal sensor provides over-temperature protection and recover, hile abnormal situation is eliminated. -Compact size and stylist design -3 local receptacles for easy use -Provides overload and short circuit protection -Built-in thermal sensor for over-temperature protection and auto recovery system
12VDC / 12W (peak at 25W) output meets the major standard of network devices and can be used globally with universal input range- Standard DC Coaxial connector (OD:5.5mm / ID:2.5mm) Batteries included: 1x 3,7V/2,6Ah- 12VDC / 12W (peak at 25W) output meets the major standard of network devices and can be used globally with universal input range. Standard DC Coaxial connector (OD:5.5mm / ID:2.5mm)- Input type C (Europlug)- Compact size allows fitting between other plugs in extension cable- Backup time for 12V/1A router (around 0.4A consumption) up to 2.5hPowerWalker DC SecureAdapter is universal solution for small electronics. The UPS provides 25W output on global standard of 12 VDC using coaxial DC connector (OD 5.5mm / ID 2.5mm). Typical applications are Routers and switches, Signal amplifiers and repeaters, POE systems, Access points, security systems, smart home control panels, VoIP phones, IP cameras, modems, decoders, Media players, medical monitors and many other 12VDC max 25W devices.The UPS is equipped with 1m long cable and its compact size allows fitting it between other plugs in an extension cord. High quality Samsung Lithium-Ion battery provides 3h backup time for typical router. Väljundvõimsuse potentsiaal 12 VA Väljundvõimsus12 W Sisendi tööpinge (minimaalne)90 V Sisendi tööpinge (maksimaalne)264 V Väljundi tööpinge (minimaalne)12 V Väljundi tööpinge (maksimaalne)12 V Toiteallika sisendsagedus50/60 Võimsustegur1Väljundpinge tundlikkus5 Toetatud akude arv1 Aku laadimisaeg3 h Tüübipärane varundamisaeg poole koormusega50 min Tüübipärane varundamisaeg täiskoormusega 25 minAku mahutavus2,6 AhAku pinge3,7 V Toote värvMust LED-indikaatorid Jah Laius 68 mm Sügavus 74 mm Kõrgus 42 mm Kaal200 gPakendi laius115 mm Pakendi sügavus108 mmPakendi kõrgus54 mm Pakendi kaal200 g
Cord retention brackets and vertical-mount bracket kits to complete rack power distribution solutionsToote värvMustKaal1 kgPakendi laius565 mmPakendi sügavus99 mmPakendi kõrgus54 mmPakendi kaal1,14 kgMõõdud (l x s x k)519 x 24 x 43 mm
