Original part number ELP1600FR Product name UPS Eaton Ellipse PRO 1600 FR Producer Eaton Class of product UPS Apparent power 1600 VA Real power 1000 Watt UPS architecture line-interactive Max. time of switching on battery 4 ms Number and type of outlets with power maintenance 4 x French Number and type of outputs with surge protection 4 x French Input connector type IEC320 C14 (10A) Sustain time with full load 4 min Sustain time with 50% load 9 min Input voltage range for main operations 165-285 V Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery No Communication ports USB Data line surge protection port RJ11 - modem/fax line, DSL LED LCD display Sound alarm Not Available Type of computer case Tower1U Rack Standard accessory CD with softwareUSB cable Software included CD with drivers Width 275 mm Height 390 mm Depth 82 mm Net weight 11.3 kg Datasheet Datasheet
The DPS-200, DPS-300, DPS-500/500DC, DPS-600, and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. They are external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, and connect to a switch’s internal power supply on the other end. They provide a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device.Redundant Power BackupEach D-Link RPS is equipped with an integrated detection circuit that continuously monitors theswitch’s internal power supply. In the event of a power interruption, the redundant power supply isimmediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from going down due to failure of a single network device power supply.Easy and Flexible DeploymentDeployment of a DPS series device does not require any change in the configuration of the LAN switch. With the exception of the DPS-500DC, each RPS is equipped with a universal internal power supply, and can be connected to any AC power source from 90 V AC to 264 V AC, 47 Hz to 63 Hz through a standard AC power cable. The DPS-500DC provides the same output power as the DPS-500, but connects to a DC power source instead of an AC power source.Rack Mounted Power Supplies: DPS-600/700The DPS-600 and DPS-700 are 19-inch standard-size rack mount power supplies designed to improve flexibility in supporting PoE (Power over Ethernet) equipment. The DPS-700 also supports 1+1 power capabilities. When cascading the DPS-700 with a device’s internal power supply, the power system can provide an additional power budget to the device.Koguvõimsus589 WAC-sisendpinge90 - 264AC-sisendsagedus50 - 60Sisendvool7.5Tõhusus80 protsentiÜleliigse toite (RPS) tugiJahOtstarveVõrgulülitiKeskmine tõrkeintervall (MTBF)624961 hToote värvMustKasutamistemperatuur (T-T)0 - 65 °CHoiustamistemperatuur (T-T)-40 - 85 °CSuhteline õhuniiskus kasutamisel (H-H)5 - 95 protsentiLaius441 mmSügavus199 mmKõrgus44 mmKaal3,7 kg
PowerWalker VI 1200 IEC is a Line - Interactive UPS which provides high performance and reliable and cost - effective backup power protection . T he UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable p ower to connected equipment and is perfect for any home or SMB ( small medium business) application.Colour blackDevice Type Standalone UPSPower Rating 1200 VA / 600 WattInput Voltage 170-280 VBuffering TimeFull Load: 1.3 minute(s)Half Load: 11 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 4x IECconnected to Battery NoProtectionLine Protection: 1x RJ-11/RJ-45Alert Messagesoptical: LED-Anzeige for sichtbare StatusanzeigeOperating TemperatureOutput V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 139x195x365 mmWeight 8.6 kg
- 3000VA / 2700W Online UPS with Power Factor 0.9- C20 Input, 4x IEC C13 Outlet, 1x IEC C19 Outlet- Batteries included: 6x 12V/9Ah- Online technology with Power Factor 0.9- Human Interface Device (USB HID) support- Wide Input Range 100-300VAC for all environments- Available with integrated batteriesThe PowerWalker VFI 1000-3000 TG and its long-run version VFI 1000-3000 TGS offer a professional solution for home and office environment. UPSs are available with internal batteries or alternatively with stronger charger (6A instead of 1A) for an external battery solution.VFI TG(S) series are detected as HID Power Device by the internal O/S drivers and can be managed without additional software. It finds its application in all dedicated systems for kiosks, ATMs as well as in high security level systems, where additional software is not allowed (i.e. banking).Väljundvõimsuse potentsiaal3000 VAVäljundvõimsus2700 WSisendi tööpinge (minimaalne)80 VSisendi tööpinge (maksimaalne)300 VVäljundi tööpinge (minimaalne)220 VVäljundi tööpinge (maksimaalne)240 VToiteallika sisendsagedus40 - 70Tõhusus90 protsentiHädaabi väljalülitus (EPO)JahAmplituuditegur3:1Sisendi võimsusfaktor0,99Väljundi võimsusfaktor0,9Väljundpinge tundlikkus-2 - 2Väljundsageduse tundlikkus-0.05 - 0.05AC-väljundi tüüpC13 pistikut, C19 pistikutAC-väljundite arv5 vahelduvvoolu kontaktUSB 2.0 portide arv1RS-232 portide arv1Emergency Power Off (EPO) ühendusJahToetatud akude arv6Aku laadimisaeg4 hTüübipärane varundamisaeg täiskoormusega4,5 minAku mahutavus9 AhAku pinge12 VKujutegurTornToote värvMustEkraanLCDPuhvertoiteallika topoloogiaOnline UPSReaktsiooniaeg4 msJahutuse tüüpAktiivneMüratase50 dBLED-indikaatoridJahSisendühendusedC20Laadimisvool1.5AKasutamistemperatuur (T-T)0 - 40 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius190 mmSügavus399 mmKõrgus328 mmKaal22,2 kgPakendi laius500 mmPakendi sügavus464 mmPakendi kõrgus324 mmPakendi kaal24,6 kgKaablid kaasa arvatudSisendi toitekaabel, USB kaabelJuhendJahVahendite CDJah
Tootja: Ever Tootegrupp: UPS Apparent power: 700 VA Real power: 420 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 3 ms Number and type of outlets with power maintenance: 2 x PL (10A) Input ühenduse tüüp: kaabel koos PL plug (10A) Sustain time with full load: 3 min Sustain time with 50% load: 9 min sisendpinge range for main operations: 168-264 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Jah sidepordid: USB HID Data line surge protection port: info puudub LED: work on joon, Work on aku, aku laadimine, short-circuit Sound alarm: Work on aku, UPS overload, short-circuit arvutikorpuse tüüp: Torn Standard tarvikud: USB kaabel, CD tarkvaraga, Manual (kasutusjuhend) kaasasolev tarkvara: PowerSoft - to free download from ever.eu Lisaandmed: aku:, 12V / 7Ah x 1 laius: 90 mm kõrgus: 150 mm sügavus: 350 mm Netokaal: 6.55 kg Brutokaal: 7.2 kg värv: valge andmeleht: spetsifikatsioon [LINK]
Tootja: Power Walker Tootegrupp: tarvikud for UPS UPS's Lisavõimalused type: Rack kit Lisaandmed: spetsiaalnekit to mount rack UPSs in 19inch cabinet koos sügavus Kuni 1100mm
Emergency power supply VI 1200 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger An excellent UPS designed to work with even the most demanding equipment. The elegant casing houses precise circuits. They are capable of producing a pure sine wave at the output and do not lose the efficiency of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display thanks to which even an inexperienced user can easily read the UPS status. With the PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever there is a power outage, the UPS, thanks to specialized systems, will immediately change the operating mode to battery power, ensuring uninterrupted access to electricity. Switching the power source will be completely imperceptible, so you can work without any problems, and the only sign of lack of power will be an acoustic signal from the UPS. A universal solution for everyone The uninterruptible power supply is perfect for both the office and home. It will allow you to complete work, an internet meeting or watch your favorite movie whenever there is a power outage. If you ever need to replace the batteries in your device, simply remove the front cover, disconnect and remove the old batteries, and replace them with new ones. Thanks to the use of an LCD display that optimizes the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to easily read information such as: voltage at the device's output, battery status or current operating mode. Full sine wave Each time the UPS enters battery backup mode, full sine wave alternating current is generated and used to maintain connected devices. This is a power source identical to that obtained from the mains, making it ideal for trouble-free operation of any device. The advantage of this solution is the ability to power even the most sensitive systems that need the most stable possible power source. Thanks to a wide range of applications, the VI CSW series uninterruptible power supplies can be used both at home and in the office. At home, they will power the central heating furnace or enable the operation of the garage door, and in the office, they will power multifunctional devices and laser printers. Additional areas of application include: aquariums, monitoring and security systems and devices with electric motors. Made in Line-Interactive technology Thanks to the use of Line-Interactive technology supported by the AVR system, VI 1200 CSW is able to significantly improve the quality of the output voltage, thanks to which the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates all voltage fluctuations in the range from 207 V to 243 V. Whenever this range is exceeded, the UPS will switch to battery power mode, maintaining continuity of power supply with the correct parameters. The short switching time of 6 ms ensures that even sensitive devices will not experience a sudden power outage. The risk of incorrect operation, turning off the device or even its permanent damage is completely eliminated. Large number of ports The UPS is equipped with 4 Schuko sockets. Each of them guarantees surge protection for the connected equipment, while protecting it against voltage spikes in the electrical network. Additionally, two sockets provide support for devices in the event of a power outage, allowing the equipment to operate uninterrupted. Additionally, the UPS has been enriched with two RJ-45 ports (input/output) protecting against overvoltages on the Ethernet line, which could arise, for example, as a result of damage to the power installation, and as a result of which the connected device would be irreversibly damaged. The USB-A ports (2.1 A) located on the front of the device can be successfully used to power and charge devices such as phones, power banks, or wireless headphones. In this way, we save ports on our computer, and we use a UPS charging station to replenish the batteries in our mobile equipment. Support for USB HID Extra control If there is a need for even more precise configuration of the UPS or its constant monitoring, the manufacturer has provided dedicated software for the device called ViewPower. The software is available for every popular operating system in multiple languages and provides: Possibility to monitor multiple devices at once Power analysis charts, UPS data histories and its graph (voltage, frequency, load, battery charge) User notification via e-mail, SMS, sound Password access protection Remote access Possibility to set a turn-on and turn-off schedule, perform battery tests and check sockets
