FeaturesCompact sizeExcellent microprocessor control guarantees high reliabilityBoost and buck AVR for voltage stabilizationAuto restart while AC is recoveringSimulated sine waveOff-mode chargingCold start functionTechnical data MODEL FP 600 FP 800 FP 1K FP 1.5K FP 2K PHASE Single phase CAPACITY 600VA / 360W 800VA / 480W 1000VA / 600W 1500VA / 900W 2000VA / 1200W PARALLEL CAPABILITY NO INPUT Nominal Voltage 110 / 120Vac or 220 / 230 / 240Vac Voltage Range 81-145Vac / 162-290Vac Frequency Range 60 / 50Hz (auto sensing) Power Factor - OUTPUT Output Voltage 110 / 120Vac or 220 / 230 / 240Vac AC Voltage Regulation (Batt. Mode) ± 10% Frequency Range (Synchronized Range) - Frequency Range (Batt. Mode) 60Hz or 50Hz ±1 Hz Current Crest Ratio - Harmonic Distortion - Transfer time AC mode to Battery mode Typical 2-6 ms Transfer time Inverter to Bypass - Waveform (Batt. Mode) Simulated Sine Wave Overload AC Mode - Overload Battery Mode - EFFICIENCY AC Mode - - - - - ECO Mode - - - - - Battery Mode - - - - - BATTERY Battery Type 12V / 7Ah 12V / 9Ah 12V / 7Ah 12V / 9Ah 12V / 9Ah Numbers 1 1 2 2 2 Typical Recharge Time 4 hours recover to 90% capacity 4-6 hours recover to 90% capacity INDICATORS AC mode Green lighting Green lighting Battery mode Green flashing Yellow flashing Fault - Red lighting ALARM Battery mode Sounding every 10 seconds Low battery Sounding every second Overload Sounding every 0.5 second Fault Continuosly sounding PROTECTION Full Protection Overload, discharge and overcharge protection PHYSICAL Dimension, D X W X H (mm) 279 x 101 x 142 320 x 130 x 182 Net Weight (kgs) 4.25Kg 4.9Kg 8.2Kg 10.4 Kg 11 Kg ENVIRONMENT Operation Temperture 0-40°C Operation Humidity 0 - 90 % and non-condersing Noise Level Less than 40dB @ 1 meter MANAGEMENT Smart RS-232/USB - Optional SNMP - Product specifications are subject to change without further notice Backup time table MODEL FP 600 FP 800 FP 1K FP 1.5K FP 2K Battery Type 12V / 7Ah 12V / 9Ah 12V / 7Ah 12V / 9Ah 12V / 9Ah Numbers 1 1 2 2 2 Backup time 19 min. 20 min. 18 min. 18 min. 15 min. Load Condition Mac book 15” (90W) x 1 Mac book 13” (60W) x 2 Mac book 13” (60W) x 1 Mac book 15” (90W) x 1 Mac book 13” (60W) x 2 Mac book 15” (90W) x 1 Mac book 13” (60W) x 2 Mac book 15” (90W) x 2
Product kirjeldus: CyberPower Value Pro VP1000EILCD - UPS - 550 vatti - 1000 VA seadme tüüp: UPS - external kaal: 6.23 kg Input Wiring: 1-phase sisendpinge: AC 230 V väljundpinge: AC 230 V ± 10% Power maht: 550 vatti / 1000 VA Sisendühendused: 1 x power IEC 60320 C14 Output Ühendusi: 6 x power IEC 60320 C13 aku: Lead Acid kestvus (Up To): 1 min at full load võrguseadeing: RS-232, USB värv: must mõõtmed (WxDxH): 10 cm x 26 cm x 22.7 cm
Product kirjeldus: PowerWalker VI 800 SCL - UPS - 480 vatti - 800 VA seadme tüüp: UPS - external kaal: 5 kg sisendpinge: AC 162-290 V väljundpinge: AC 230 V ± 10% Power maht: 480 vatti / 800 VA Sisendühendused: 1 x power CEE 7/7 Output Ühendusi: 2 x power Type F aku: - 9 Ah Batteries kogus: 1 võrguseadeing: USB mõõtmed (WxDxH): 10.1 cm x 30 cm x 14.2 cm
No. of batteries: 1 Voltage: 12 Battery capacity: 7.2 Dimensions: 150 x 65 x 95 mm Weight: 1.985 Other features: Max. Discharge Current: 108 A Loading the buffer: 13.6 V - 13.8 V Cyclic loading: 14.5 V - 15.0 V
The distinctive design patterns of the MAG A750BN PCIE5 III stand for unity and strength. It brings all components together by reliably and stably delivering power to the entire system. With the MAG A750BN PCIE5 III, every system has the necessary power to take on any challenge. Your power supply’s efficiency has a direct impact on your system’s performance and energy consumption. The 80 PLUS certification ensures lower energy consumption and a qualified level of efficiency.
Die Anker SOLIX tragbare Powerstation C300X versorgt Geräte unterwegs mit 300 Watt (600 Watt Spitzenleistung), ganz gleich, welcher Anschluss. Die AC-Ausgänge können eine maximale Leistung von 300 Watt an angeschlossene Geräte liefern, es werden auch bis zu 600 Watt mit SurgePad unterstützt. Alle AC-Ausgänge unterstützen SurgePad. Der 288Wh-Akku unterstützt schnelles Laden mit 140 Watt USB-C PD 3.1 in beide Richtungen. Die tragbare Powerstation C300X ist 15% kompakter als vergleichbare Powerstationen. Mit dem separat erhältlichen Tragegurt ist das Energiebündel bequem zu transportieren. Der integrierte LED-Lichtstreifen erzeugt ein Umgebungslicht in drei wählbaren Helligkeitsstufen und verfügt über einen SOS-Modus. Der Solareingang unterstützt ein 11V - 28V Solarladegerät mit einem XT-60 Anschluss. Die Powerstation ist z.B. mit den Anker SOLIX 100 Watt oder 60 Watt Solarmodulen kompatibel. Solarpanels laden bis zu 80% in nur 2,5 Stunden, Steckdosen laden bis zu 80% Akku in 50 Minuten auf. Für schnelles Aufladen lässt sich auch der 140 Watt PD USB-C Anschluss verwenden. Der LFP-Akku hat eine Lebensdauer von zehn Jahren. Die Powerstation gibt nur 25dB in 1 Meter Entfernung von sich. Das im Set enthaltene Anker SOLIX tragbare Solarpanel PS60 ist 40% leichter als vergleichbare Panels. Dank seines ultraleichten Designs lässt es sich bequem mit einer Hand tragen. Das Solarpanel lässt sich auf die Größe eines DIN A4 Blatts zusammenfalten und ist so platzsparend zu verstauen. Das PS60 Solarpanel hält Regen, Staub und Spritzwasser zuverlässig stand und eignet sich ideal für den Außeneinsatz. Die hochwertigen Materialien wie flexibles Fiberglas sorgen für mehr Flexibilität und Abriebfestigkeit. Der Anschluss ist an alle Powerstations mit 11V- 60V MC4-Eingang möglich.TypPowerstationFarbegrauEAN0194644276546Hersteller-Nr.B1723311Hergestellt inChinaSerieAnker SOLIXSmartHome kompatibelWLANArtMobile Stromversorgung (Auto, Wohnmobil), NotstromversorgungKommunikationHersteller-App, WLAN, BluetoothStromquelleSteckdose oder Solarmodul/e, Anschlüsse: USB-C, Kaltgerätestecker, XT60Lade-Anschlüsse1x USB-A-Buchse, 3x USB-C BuchseAnschlüsse für Verbraucher2x Schutzkontakt-Steckdose, 1x 12V KFZ-Buchse DCStromspeicherInterner AkkuAkku1 StückAkku TechnologieLithium-Eisenphosphat-Akku (LiFePO4)Akku Gesamtkapazität288 WhStromeingänge3 StückEingangsleistung AC max.380 WattEingangsleistung PV-Eingang max.100 WattEingangsspannung AC / DC220 bis 240 VoltEingangsspannung PV-Anlage11 bis 28 VoltEingangsspannung WeitereUSB-C-Eingang 9V 3A / 15V 3A / 20V 5A / 28V 5A (max. 140 W)Eingangsstrom AC max.2 AEingangsstrom PV-Eingang A max.8,2 AAusgangsleistung Nennleistung AC300 WattAusgangsleistung Max. Leistung AC600 WattAusgangsleistung Nennleistung DC120 WattAusgangsspannung AC230 VoltAusgangsspannung DC12 VoltAusgangsstrom max. AC1,31 AAusgangsstrom max. DC10 ABedienungEin-/Ausschalter, Taste zum Ein-/Ausschalten der TaschenlampeAnzeige/DisplayDigitales LC-Display, Aufladestatus, Batteriestatus, LadezustandGeeignete GeräteHaushaltsgeräte, Handy, Notebook, TabletSicherheitOCP - Überladeschutz, OTP - ÜbertemperaturschutzFeatureUnterbrechungsfreie Stromversorgung (USV)
New Evolution of Bronze MONTECH BETA 2 leads the evolution of essential power supplies, bringing modern standards, refined design, and long-term reliability to the 80 PLUS Bronze segment. Built on the ATX 3.1 standard and with PCIe 5.1 support available on the 850W model, BETA 2 is designed to power today and tomorrow’s systems with greater stability, efficiency, and confidence. Next-Gen Ready BETA 2 is fully compliant with the latest ATX 3.1 standard, ensuring safer and more reliable power delivery for modern platforms. 80 PLUS Bronze Efficiency Certified with 80 PLUS Bronze efficiency, BETA 2 delivers optimized power conversion with reduced energy loss. The improved internal design helps maintain consistent efficiency across typical usage scenarios, balancing performance and value. Enhanced Power Architecture BETA 2 adopts DC-to-DC technology to deliver tighter voltage regulation and reduced fluctuation under load. This design improves overall system stability and helps protect sensitive components during power transitions. High Quality Components At the heart of BETA 2 is an industrial-grade Japanese main capacitor rated for 105°C/221°F operation. Built to withstand high temperatures and long-term stress, it enhances durability and reduces the risk of instability over time. Upgraded Cooling BETA 2 features an upgraded HDB cooling fan, delivering quieter operation and improved longevity compared to traditional sleeve-bearing designs. Optimized airflow supports stable performance even during extended workloads. Refined Aesthetics & Premium Cabling The MONTECH signature chassis design supports efficient airflow, while upgraded embossed cables deliver a cleaner, more premium look and a more refined overall build presentation. Comprehensive Protection & Extended 5-Year Warranty BETA 2 is built with comprehensive power protections including OPP, OVP, UVP, SCP, OCP, OTP to ensure stable operation for your system. Backed by an extended 5-year warranty, it reflects MONTECH’s confidence in long-term reliability and commitment to dependable performance you can trust. Next-Gen Ready 80 PLUS Bronze Efficiency Enhanced Power Architecture High Quality Components Upgraded Cooling Refined Aesthetics & Premium Cabling
SNMP Card for UPS - Expansion for Armac Uninterruptible Power Supplies The SNMP network card is a communication accessory that extends the capabilities of compatible Armac-Energy UPS devices, providing full real-time management and monitoring from anywhere via a web browser or SNMP manager. With integrated network access, users can schedule UPS shutdowns, startups, or restarts, view basic battery status, and monitor key parameters-all without installing additional software. The solution supports event logs, self-test schedules, email notifications, SNMP traps, and custom alarm thresholds, offering centralized control over the entire uninterruptible power system. Industrial-Class Modbus 485 Poll/Slave & Modbus TCP/IP Connectivity Modbus RTU (485): The card can operate as Poll (master), allowing it to query up to 8 external sensors/devices, or as Slave, providing UPS parameters to PLC controllers. Modes are switchable but mutually exclusive. Flexible Configuration: Users can set baud rate, parity, device address, and function independently of the mode. In Poll mode, the exact registers to retrieve data from are selectable. Modbus TCP/IP Protocol: Encapsulates RTU frames in Ethernet packets (port 502, changeable), enabling remote access to UPS parameters where a direct physical connection is not feasible. This allows connection to end devices using Modbus TCP/IP or to devices requiring a physical port via a TCP/IP-to-RTU converter. SNMPv1 / SNMPv2c / SNMPv3 Basic - Network Management for Multiple UPS Units The SNMP agent supports UPS-MIB (RFC1628) and Armacs private enterprise implementation (PPC), enabling comprehensive monitoring of UPS devices and environmental sensors (EMD) connected by the user. SNMP TRAP allows automatic notifications of alarms in v1 and v2c, while a simple web-based UPS control panel provides basic commands (10 s test, bypass on/off, buzzer off). SNMP v3 provides basic login authentication with username and password. Importantly, all Armac UPS systems are equipped with overload protection. If the UPS is overloaded during normal operation, it safely disconnects the connected devices, enhancing both safety and user convenience. Compliance with RFC 1628 UPS-MIB RFC1628 defines a standardized set of objects (OIDs)-covering UPS states, operational parameters, battery status, alarms, and tests. The Armac card supports all critical OIDs and extends default resolution, providing values with decimals (mV, 0.1 Hz, 0.01°C) for precise monitoring of load and temperature without additional PPC implementation. SMTP with SSL, NTP, and DNS - Secure Notifications MTP (TLS/SSL, STARTTLS): Sends alerts to multiple email accounts with authentication. NTP: Automatic time synchronization ensures SNMP and CSV logs have consistent timestamps across devices. DNS: Hostname resolution. Other Features and Functionalities Wake On LAN: Remote server/PC power-on after power restoration or UPS battery operation. Task Scheduler: Cyclical UPS on/off, battery tests, and calibrations. Configurable Alarm Thresholds: Voltage, temperature, humidity, and battery runtime. Remote Command Execution: Allows control of any device using SSH or Telnet, without extra software, e.g., shutting down a server or running a user-defined script. The SNMP card executes dedicated commands for each event type. Event and Parameter Logging: Exportable in CSV via a persistent link. Easy Firmware Updates: Via web interface. Why Armac-Energy? Armac focuses on reliability, open standards, and seamless integration with existing IT and automation infrastructure. The Armac UPS SNMP card is a compatible network management card (NMC) plug-in that allows remote control of the UPS and monitoring of critical data in a unified management environment accessible through multiple interfaces. It is ideal for installers, administrators, and end users who, in line with Armacs mission We create good energy, want to combine power protection with intelligent analytics.
APC Smart-UPS SC is ideal for small and medium businesses looking to protect entry-level servers and networking equipment from power disturbances and outages. The Smart-UPS SC features network grade runtime, hot swap batteries, and built-in data line protection for worry free uninterruptible power protection for increased availability. The included PowerChute Business Edition software, which has an installed base in the millions, gives entry-level network and server users a proven UPS management solution. PowerChute Business Edition also manages other Smart-UPS models, allowing easy upgrades as applications change, without having to replace software or retrain administrators.
PowerWalker VI 1000RT HID Line-Interactive UPS is a Line-Interactive UPS with pure sine wave output and designed for fulfilling high quality power protection demand. It offers full protection for devices such as servers, network/telephone communication systems as well as for industrial applications. With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19" rack systems or used as tower.Features:Pure sine wave output with high output power factor 0.9Monitoring software includedOutput THDV < 3%High Frequency Topology50/60 Hz frequency converter modeSelectable Line SensitivitySwappable LCD DirectionProgrammable power management outletEmergency power off (EPO) functionIntelligent fan control for reduced noise levelSelf-Monitoring and Fault DiagnosisSmart battery charger to extend battery life Type Line Interactive USV (UPS) Nominal Power (Watt) 900 Nominal Power (VA) 1.000 Number of Batteries 3 Max. Backup Time (100W Load / Min.) 79 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 8x Colour Black Width (mm) 438 Height (mm) 86,5 Depth (mm) 436 Weight (kg) 17,8
Original part number 9PX3000IRT3U Product name UPS Eaton 9PX 3000i RT3U Producer Eaton Class of product UPS Apparent power 3000 VA Real power no data UPS architecture on-line double conversion Max. time of switching on battery no data Number and type of outlets with power maintenance 1x IEC C202 x IEC320 C19 (16A) Input connector type IEC320 C20 (16A) Sustain time with full load no data Sustain time with 50% load no data Input voltage range for main operations 176-276 V Input voltage alternating range 100-276 V Cold start no data (AVR) Automatic Voltage Regulation no data Sine while working on battery No Communication ports RS232 (DB9)USBTerminal Block Data line surge protection port no data LED LCD display Sound alarm no data Type of computer case 3U RackFull Tower Standard accessory Power supply cable Software included no data Colour Black Datasheet Specification [LINK]
No. of batteries: 1 Voltage: 6 Battery capacity: 9 Environment requirements: - Permissible temperature range for discharge: -15 ~ 50 ° C- The permissible temperature range for charging: -15 ~ 40 degrees C- Permissible temperature range for storage: -15 ~ 40 degrees C- The recommended range average temperature: 25 ° C Dimensions: 151 x 32 x 94 mm Weight: 1.32 Other features: - Maximum discharge current: 130A (5 sec)- Internal resistance: 23 mOhm- Permissible charging voltage (buffering): 13.5 to 13.8 VCD / 25 degrees C- Permissible charging voltage (cycle): 14.4 to 15 VCD / 25 ° C- The recommended maximum charging current: 3.4 A
