Product kirjeldus: CyberPower Value Pro VP1000EILCD - UPS - 550 vatti - 1000 VA seadme tüüp: UPS - external kaal: 6.23 kg Input Wiring: 1-phase sisendpinge: AC 230 V väljundpinge: AC 230 V ± 10% Power maht: 550 vatti / 1000 VA Sisendühendused: 1 x power IEC 60320 C14 Output Ühendusi: 6 x power IEC 60320 C13 aku: Lead Acid kestvus (Up To): 1 min at full load võrguseadeing: RS-232, USB värv: must mõõtmed (WxDxH): 10 cm x 26 cm x 22.7 cm
PowerVAW: 2200 VA PowerW: 1200 W Runtime: 9.5/2.25 Inputpinge: 140 - 300V Outputpinge: - InputFrequency: 50/60 Hz +/- 5 Hz Auto-sensing OutputFrequency: 50/60 Hz +/- 1 Hz Sync to mains InputConnections: - OutputConnections: - WaveformType: Stepped approximation to a sinewave RechargeTime: 8 h Patarei tüüp: Lead-acid Serial: - USB: Jah SmartSlot: - RJ45: - liidesPorts: USB ControlPanel: LED status display koos On joonOn Battery Alarm: Alarm when on batteryDistinctive low battery alarm värv: must Korpus: - Paki sisu: - laius: 140 mm sügavus: 390 mm kõrgus: 190 mm kaal: 12.300 kg Grosskaal: -
Original part number ELP1200FR Product name UPS Eaton Ellipse PRO 1200 FR Producer Eaton Class of product UPS Apparent power 1200 VA Real power 750 Watt UPS architecture line-interactive Max. time of switching on battery 4 ms Number and type of outlets with power maintenance 4 x French Number and type of outputs with surge protection 4 x French Input connector type IEC320 C14 (10A) Sustain time with full load 4 min Sustain time with 50% load 9 min Input voltage range for main operations 165-285 V Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery No Communication ports USB Data line surge protection port RJ11 - modem/fax line, DSLRJ45 - linia 10/100/1000BaseT LED LCD display Sound alarm Not Available Type of computer case Tower1U Rack Standard accessory CD with softwareUSB cable Software included CD with drivers Width 275 mm Height 390 mm Depth 82 mm Net weight 9.9 kg Datasheet Datasheet
Features- High efficiency results in energy saving with output power factor 0.9- Human Interface Device (HID) compatible USB connection (no additional drivers needed)- Wide input voltage range for all environments and support for AC generator- Available with integrated batteries
Original part number VI 800 SW/FR Product name Power Walker UPS Line-Interactive 800VA 2x PL 230V, PURE SINE, RJ11/RJ45,USB,LCD Producer Power Walker Class of product UPS Apparent power 800 VA Real power 480 Watt UPS architecture line-interactive Max. time of switching on battery 6 ms Number and type of outlets with power maintenance 2 x PL (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 1 min Sustain time with 50% load 5 min Input voltage range for main operations 220-240 V Input voltage alternating range 170-280 V Cold start Yes (AVR) Automatic Voltage Regulation No Sine while working on battery No Communication ports N/A Data line surge protection port N/A LED work on lineWork on batteryconsiderable battery flat Sound alarm Work on batteryMains breakdownconsiderable battery flat Type of computer case Desktopcompact size Standard accessory manual (user guide)power supply cable Software included no data Width 328 mm Height 100 mm Depth 145 mm Net weight 6 kg Colour Black Datasheet Datasheet Additional information Recharge Time 4h for 90%Auto restart while AC is recoveringSimulated sine waveWall-mounting or desktop use flexibility
Product kirjeldus: APC Smart-UPS SRT 2200VA RM - UPS - 1980 vatti - 2200 VA - Lead Acid - koos APC UPS Network Management kaart seadme tüüp: UPS - rack-mountable / external Rack Size: 2U kaal: 25 kg sisendpinge: AC 220/230/240 V väljundpinge: AC 220/230/240 V Power maht: 1980 vatti / 2200 VA Sisendühendused: 1 x power IEC 60320 C20 Output Ühendusi: 8 x power IEC 60320 C13 2 x power IEC 60320 C19 aku: Lead Acid Lead Acid kestvus (Up To): 4 min at full load võrguseadeing: RS-232, USB Lisatarvikud: vertikaalne stand mõõtmed (WxDxH): 43.2 cm x 58.4 cm x 8.5 cm Environmental Standards: ENERGY STAR Manufacturer Warranty: 3-aastane garantii Bundled with: APC UPS Network Management kaart
Tootja: Power Walker Tootegrupp: UPS Apparent power: 2000 VA Real power: 1800 vatti UPS arhitektuur: on-line double conversion Max. time of switching on aku: 0 ms Number and type of outlets with power maintenance: 4 x IEC320 C13 (10A) Number and type of outputs with surge protection: 4 x IEC320 C13 (10A) Input ühenduse tüüp: IEC 320 C13 (10A) Sustain time with full load: 3.8 min Sustain time with 50% load: 11 min sisendpinge range for main operations: 110-276 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Jah sidepordid: USB 2.0, RS232 Data line surge protection port: info puudub LED: LCD ekraan Sound alarm: breakdown, device overheating, Mains breakdown, Overload, Work on aku arvutikorpuse tüüp: Torn Standard tarvikud: CD tarkvaraga, USB kaabel kaasasolev tarkvara: ViewPower (Shutdown tarkvara) laius: 190 mm kõrgus: 328 mm sügavus: 399 mm värv: must
Kompaktne ja vastupidav 1500VA puhvertoiteallikas . • Hoiab arvuti töös peale voolukatkestust, et saaksid salvestada vajalikud andmed ning aitab vältida riistavara kahjustust. • Ideaalne kasutamiseks kodus või kontoris tänu kompaktsele suurusele ja energia varule, mis suudab töös hoida ühte arvutit. • Liigpingeimpulsi eest kaitstud väljundid ning AVR funktsioon kaitseb seadmeid kahjustuste eest, mis võivad tekkida pinge muutustest. • Selged optilised ning akustilised teavitused muutustest. • Kaitseb ka ülekoormuste ning lühiste eest.
RACK UPS PowerWalker VI 1000 RLP Line-interactive 1000VA 8X IEC C13 USB-B EPO LCD 2U. Made with Line-Interactive technology, the VI RLP UPS is a fully manageable, advanced unit giving you total control over your uninterruptible power system. Each of the 8 UPS outlets can be individually programmed, using dedicated software, adapting the unit to the installation and user requirements. In addition, the VI RLP generates a full sine wave on each of its outputs, ensuring that even sensitive equipment will be fully protected against sudden power outages. With a PF power factor of 0.9 and a high energy efficiency, the VI RLP provides a long back-up time, which can be further extended using a battery module. The entire unit is housed in a compact 2U high rack enclosure with a clear LCD screen and the possibility of additional functionality expansion with: SNMP card, cable organiser and other optional accessories. With a PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever the power goes out, the UPS, thanks to specialised circuitry, will instantly change to battery mode, ensuring uninterrupted access to electricity. The switchover will be completely imperceptible, as a result of which you can work uninterrupted and the only sign of a power failure will be an audible signal from the UPS. Full control over any connected equipment A distinguishing feature of the VI RLP series is the ability to separately configure each of the unit's eight sockets, adapting them to given requirements and needs. This can be done using the PowerMaster+ software via the USB interface, using the buttons under the LCD screen, or with an additional SNMP card (10131008). The functionality of each outlet can be extended to include, among other things, allocation to a specific critical section, the operating time of which can be systematically extended by cutting off other equipment from the emergency power supply; in addition, each outlet can be assigned its own start-up/shutdown delay. A substantial set of tools provided by the software provides additional options for monitoring and configuring the entire UPS unit, through a clear and readable user interface. Line-Interactive technology design Thanks to the use of Line-Interactive technology supported by the AVR circuit, the VI RLP is able to significantly improve the quality of the output voltage, so that the connected device will operate without unnecessary disturbances. Using an autotransformer, AVR eliminates any voltage fluctuations between 207 V and 243 V. Whenever this range is exceeded, the UPS will switch to battery mode, maintaining a continuous supply of power with the correct parameters. A short switching time of 6 ms will ensure that even sensitive equipment will not be affected by a sudden power failure. The risk of malfunctions, equipment shutdown or even permanent damage is completely eliminated. Full sine wave Thanks to the use of Line-Interactive technology supported by the AVR circuit, the VI RLP is able to significantly improve the quality of the output voltage, so that the connected device will operate without unnecessary interference. Using an autotransformer, the AVR eliminates any voltage fluctuations between 207 V and 243 V. Whenever this range is exceeded, the UPS will switch to battery mode, maintaining a continuous supply of power with the correct parameters. A short switching time of 6 ms will ensure that even sensitive equipment will not be affected by a sudden power failure. The risk of malfunctions, equipment shutdown or even permanent damage is completely eliminated. The professional solution An uninterruptible power supply is suitable for both the office and the server room. It allows you to finish your work, a web meeting or writing a document when the power goes out. The high performance of the VI 1000 RLP, is due to its meticulous design using modern technology, ensures that you can connect, operate and manage multiple devices at once, without worrying about overloading. The LCD screen allows intuitive monitoring of the equipment's operation, regardless of the position of the device, thanks to its rotatability. Clear markings will allow you to easily read information such as the device's output voltage, overload and current operating mode. It is also possible to configure the equipment and each of the sockets, using the built-in buttons under the LCD screen. Support for USB HID Take full control of the status of your UPS system with support for USB HID, which is the primary driver for monitoring the status of equipment on the most popular systems (Windows, Linux, Mac OS). This makes UPS operation easy and hassle-free. No additional software is required and we can manage the UPS from our computer, in a similar way to a laptop battery.
PowerWalker VI 850 SE Line-Interactive UPS System PowerWalker VI 850 SE provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ-11 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application. Super smart charger to shorten charging time Built-in boost and buck AVR Simulated sine wave Auto restart while AC is recovering Off-mode charging Cold start function USB communication port RJ-11 surge protection Monitoring software included Green function for energy saving Product Features: Capacity: 850VA/480W Input Voltage: 220/230/240VAC Input Voltage Range: 170-280VAC ±7% Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10% Output Frequency: 50Hz or 60Hz Frequency Regulation (Battery Mode): ± 1Hz Output Waveform: Simulated Sine Wave Type Line Interactive USV (UPS) Nominal Power (Watt) 480 Nominal Power (VA) 850 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 24 Display No Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang 2x Colour Black Width (mm) 100 Height (mm) 143 Depth (mm) 279 Weight (kg) 5
