Cooler Master X Silent MAX Platinum 1300W – PC power supply Cooler Master X Silent MAX Platinum 1300W powers motherboard, processor, graphics card and drives. What matters is continuous output, efficiency, and which connectors are available for the graphics card in use. The dimensions are 180 x 150 x 86 mm. Key Features Fully modular cabling: Every cable is detachable, so only what is actually needed ends up in the case. ATX 3.1 with 12V-2x6: The 12V-2x6 connector powers current graphics cards directly, without an adapter made from several PCIe plugs. Control via MasterCTRL: The MasterCTRL software reads out values and adjusts the behaviour. Defined continuous output: The stated wattage is available continuously – not just as a short peak. 80 PLUS efficiency: Higher efficiency means less waste heat inside the case and lower losses. Protection circuits: Over-voltage, under-voltage and short-circuit protection safeguard the connected hardware. Check the connectors: Compare the PCIe connectors with your graphics card's requirements before buying. Technical Specifications TypeCooler Master X Silent MAX Platinum 1300W ManufacturerCooler Master Manufacturer P/NMPS-D001-AFAP-NBEU ATX StandardATX 12 V Ver. 3.1 PFCActive PFC Input Voltage100 – 240 V Input Frequency50 – 60 Hz Dimensions180 x 150 x 86 mm Fan Size120 mm Bearing TypeLDB Fan Speed2050 RPM Efficiency≥ 92% @ typical load 80 PLUS Certification80 PLUS Platinum Operating Temperature0 – 50 °C Lifetime (MTBF)>100,000 hours ProtectionsOPP/ OVP/ OTP/ OCP/ SCP/ UVP/ Surge & Inrush Protection ATX 24-pin Connectors1 EPS Connectors1 SATA Connectors12 Peripheral Connectors (4-pin)4 PCIe Connectors4 12V-2x6 Connectors2 SeriesX series Cable ManagementFully modular Form FactorATX Wattage1300 W
The SilverStone Extreme 1000Rz Platinum is a powerful SFX power supply for compact Small-Form-Factor systems. It complies with the Intel SFX12V V4.1 standard and is equipped with a Gen5-12V-2x6 PCIe connector for modern graphics cards. The Cybenetics Platinum certification stands for high energy efficiency. The power supply provides continuous 24/7 performance at an operating temperature of up to 40 °C. An ultra-quiet 92-mm FDB fan with an intelligent shutdown function ensures low-noise operation. The fully modular design with flexible, embossed cables makes installation easier. High-quality Japanese electrolytic capacitors ensure reliability and durability.
Sealed, maintenance free, lead-acid battery, VRLA type, with 5 years designed life (according to Eurobat: 6-9 years - General Purpose). Universal battery for standby and cycle use.
PowerWalker VI 3000 RT HIDPowerWalker VI 3000RT HID Line-Interactive USVPowerWaker VI3000RT HID is a Line-Interactive UPS with pure sine wave output and designed for fulfiling high quality power protection demant. It offes full protection for devices such as servers, network/telephone communication systems as well as for industrial applications.With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19" rack systems or used as tower.Features: 3000VA Line-Interactive UPS with 0.9 Output Power Factor2-in-1 Rack/Tower Design with LCD display9 IEC Outlets, Dry out contacts, EPO function, RJ11/45USB & RS-232 Connection for monitoringOptional: SNMP module, AS/400 card, MBS, ATS, Rack installation kit, Battery PackDimension: 438 x 608 x 86,5 mmWeight: 30,42 kg Type Line Interactive USV (UPS) Nominal Power (Watt) 2.700 Nominal Power (VA) 3.000 Number of Batteries 6 Max. Backup Time (100W Load / Min.) 231 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 9x Colour Black Width (mm) 608 Height (mm) 86,5 Depth (mm) 438 Weight (kg) 30,42
PowerWalker VI 650 S E LCD /IEC provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ - 11 surge protection. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application.Colour blackDevice Type Standalone UPSPower Rating 650 VA / 350 WattInput Voltage 170-280 VBuffering TimeFull Load: 1 minute(s)Half Load: 6 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 4x IECconnected to Battery NoProtectionLine Protection: 1x RJ-11Overvoltage Protection: YesAlert Messagesoptical: LCD Display for sichtbare StatusanzeigeOperating TemperatureOutput V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 100x143x290 mmWeight 4.4 kg
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.SuguSisestatav konnektor/sisekonnektorToote värvMustKaabli pikkus3,05 mSisendvool16Kasutamistemperatuur (T-T)0 - 70 °CHoiustamistemperatuur (T-T)-20 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)20 - 80 protsentiSuhteline õhuniiskus (H-H) hoiustamisel20 - 80 protsentiKasutamiskõrgus0 - 3000 mKõrgus mittekasutamisel0 - 15000 mKaal420 gPakendi laius230, 45Pakendi kõrgus230 mmPakendi kaal420 gMõõdud (l x s x k)230 x 45 x 230 mm
AvailabilityIntegrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network.Flash UpgradeableQuickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.Local Current Monitoring DisplayThe aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.Power DelaysAllows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).Network Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Marketing FeaturesPower DelaysAllows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).Local Current Monitoring DisplayThe aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.Remote Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.AgilityWide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.Single input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.PDU tüübidLülitatudPüstikmontaaž1UPaigaldusHorisontaalne/vertikaalneToote värvMustRoHS-vastavusJahSertifikaatcUL Listed, CE, CSA, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, GOST, IRAM, MIC, UL 60950, UL Listed, VDE, VCCI, REACHNominaalne sisendpinge200-230Piirvool16 ASisendsagedus50/60Nominaalne väljundpinge208-230Koormusvõime3680 VAMaksimaalne sisendvool faasi kohta20 AAC-väljundite arv8 vahelduvvoolu kontaktAC-väljundi tüüpC13 pistikutSisendühenduse tüüpIEC-320 C20SeireVoolVäljundi reguleerimineRecycle, VäljalülitamineKaabli pikkus2,5 mKasutamistemperatuur (T-T)0 - 45 °CHoiustamistemperatuur (T-T)-25 - 65 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiSuhteline õhuniiskus (H-H) hoiustamisel0 - 95 protsentiKasutamiskõrgus0 - 3000 mKõrgus mittekasutamisel1 - 15000 mMõõdud (l x s x k)445 x 108 x 44 mmKaal2,27 kgPakendi mõõtmed (l x s x k)470 x 343 x 70 mmPakendi kaal3,45 kg
The PowerWalker VFI 1000-3000 TG and its long-run version VFI 1000-3000 TGS offer a professional solution for home and office environment. UPSs are available with internal batteries or alternatively with stronger charger (6A instead of 1A) for an external battery solution. VFI TG(S) series are detected as HID Power Device by the internal O/S drivers and can be managed without additional software. It finds its application in all dedicated systems for kiosks, ATMs as well as in high security level systems, where additional software is not allowed (i.e. banking).
Tootja: Power Walker Tootegrupp: UPS Apparent power: 1500 VA Real power: 1500 vatti UPS arhitektuur: on-line Max. time of switching on aku: 0 ms Number and type of outlets with power maintenance: 4 x IEC320 C13 (10A) Input ühenduse tüüp: French/Belgian Sustain time with full load: 2.96 min Sustain time with 50% load: 10.3 min sisendpinge range for main operations: 110-300 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Jah sidepordid: USB, RS232 (RJ45) Data line surge protection port: RJ11/RJ45 LED: LCD ekraan Sound alarm: Jah arvutikorpuse tüüp: Torn Standard tarvikud: CD tarkvaraga kaasasolev tarkvara: ViewPower (Shutdown tarkvara) laius: 145 mm kõrgus: 221 mm sügavus: 397 mm Netokaal: 14.6 kg Brutokaal: 16 kg värv: must
Emergency power supply VI 1200 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger An excellent UPS designed to work with even the most demanding equipment. The elegant casing houses precise circuits. They are capable of producing a pure sine wave at the output and do not lose the efficiency of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display thanks to which even an inexperienced user can easily read the UPS status. With the PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever there is a power outage, the UPS, thanks to specialized systems, will immediately change the operating mode to battery power, ensuring uninterrupted access to electricity. Switching the power source will be completely imperceptible, so you can work without any problems, and the only sign of lack of power will be an acoustic signal from the UPS. A universal solution for everyone The uninterruptible power supply is perfect for both the office and home. It will allow you to complete work, an internet meeting or watch your favorite movie whenever there is a power outage. If you ever need to replace the batteries in your device, simply remove the front cover, disconnect and remove the old batteries, and replace them with new ones. Thanks to the use of an LCD display that optimizes the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to easily read information such as: voltage at the device's output, battery status or current operating mode. Full sine wave Each time the UPS enters battery backup mode, full sine wave alternating current is generated and used to maintain connected devices. This is a power source identical to that obtained from the mains, making it ideal for trouble-free operation of any device. The advantage of this solution is the ability to power even the most sensitive systems that need the most stable possible power source. Thanks to a wide range of applications, the VI CSW series uninterruptible power supplies can be used both at home and in the office. At home, they will power the central heating furnace or enable the operation of the garage door, and in the office, they will power multifunctional devices and laser printers. Additional areas of application include: aquariums, monitoring and security systems and devices with electric motors. Made in Line-Interactive technology Thanks to the use of Line-Interactive technology supported by the AVR system, VI 1200 CSW is able to significantly improve the quality of the output voltage, thanks to which the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates all voltage fluctuations in the range from 207 V to 243 V. Whenever this range is exceeded, the UPS will switch to battery power mode, maintaining continuity of power supply with the correct parameters. The short switching time of 6 ms ensures that even sensitive devices will not experience a sudden power outage. The risk of incorrect operation, turning off the device or even its permanent damage is completely eliminated. Large number of ports The UPS is equipped with 4 Schuko sockets. Each of them guarantees surge protection for the connected equipment, while protecting it against voltage spikes in the electrical network. Additionally, two sockets provide support for devices in the event of a power outage, allowing the equipment to operate uninterrupted. Additionally, the UPS has been enriched with two RJ-45 ports (input/output) protecting against overvoltages on the Ethernet line, which could arise, for example, as a result of damage to the power installation, and as a result of which the connected device would be irreversibly damaged. The USB-A ports (2.1 A) located on the front of the device can be successfully used to power and charge devices such as phones, power banks, or wireless headphones. In this way, we save ports on our computer, and we use a UPS charging station to replenish the batteries in our mobile equipment. Support for USB HID Extra control If there is a need for even more precise configuration of the UPS or its constant monitoring, the manufacturer has provided dedicated software for the device called ViewPower. The software is available for every popular operating system in multiple languages and provides: Possibility to monitor multiple devices at once Power analysis charts, UPS data histories and its graph (voltage, frequency, load, battery charge) User notification via e-mail, SMS, sound Password access protection Remote access Possibility to set a turn-on and turn-off schedule, perform battery tests and check sockets
Product kirjeldus: Eaton FlexPDU - power distribution unit - 3000 VA seadme tüüp: Power distribution unit - rack-mountable Rack Size: 19" - 1U sisendpinge: AC 220-240 V Power maht: 3000 VA Sisendühendused: 1 x power IEC 60320 C20 16A Output Ühendusi: 8 x power CEE 7/4 1 x IEC connector mõõtmed (WxDxH): 48.3 cm x 8 cm x 4.4 cm
