PowerWalker VI 22 00 LCD is a Line - Interactive UPS which provides high performance and reliable and cost - effective backup power protection . The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection . Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or SMB ( small medium business) application.Device Type Standalone UPSPower Rating 2200 VA / 1200 WattInput Voltage 170-280 VBuffering TimeFull Load: 1 minute(s)Half Load: 5 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 2x IEC 320 C13connected to Battery YesType 2 2x Schutzkontaktconnected to Battery YesProtectionLine Protection: 1x RJ-11/RJ-45Overvoltage Protection: YesAlert Messagesoptical: LCD-Panel with Anzeige for USV in operating, USV im Batterieoperating, overload, AlarmOperating TemperatureCharging time to 95% (at half load) 6 hour(s)Output V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 365x195x139 mmWeight 10.4 kg
Active power: 480 No. of batteries: 1 Voltage: 12 Battery capacity: 7 Hold-up time (maks): 6 Backup time (100% load): 15 Charging time: 6 Dimensions: 190 x 296 x 89,5 mm Weight: 5.5
OLS3000EA-DE UPS emergency power supply The CyberPower OLS3000EA-DE is a high-efficiency UPS with an online double conversion topology that provides seamless pure sine wave power to critical devices such as NAS, servers, DVR/surveillance systems for transportation and infrastructure, and emergency systems. It is usually integrated with a server or data center environment. The UPS is equipped with a color LCD panel allowing users to monitor the power system and easily configure settings. This model is generator compatible and can also operate in ECO mode to save energy. The product can be connected to an emergency power off switch (EPO), which allows users to immediately turn off the UPS in the event of a failure. Variable speed fans provide automatic temperature management based on power consumption to reduce noise and provide greater comfort for users. Online UPS (double conversion) topology Generator compatibility Zero switching time Protection against interference and surges Color LCD panel Serial communications port PowerPanel management software Tower type ECO mode Overload protection Smart Battery Management (SBM) EMI and RFI filtering Variable speed fans Emergency Power Off (EPO) Port SNMP/HTTP remote management (optional)
SNMP Cards offer IP Adress and WebInterface for most convinient monitoring. SNMP modules allows remote monitor and manage multiple UPSs from anywhere with internet access. Integrated web access will leverage internet capability of SNMP card to remotely program or shut down UPSs. Equipped with SNMP card, power conditions of all UPSs can be monitored anytime/anywhere even through the UPS units are located in different floors/locations. Mini NMC Card fits for: VFI 20000-30000-40000 TP 3/3 BX-BE-BI VFI 15000 MP 3/3 VFI 1000-2000-3000 T/E LCD
Tootja: DIGITUS Tootegrupp: UPS Apparent power: 800 VA Real power: 480 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 6 ms Number and type of outlets with power maintenance: 2 x SCHUKO Input ühenduse tüüp: Schuko Sustain time with full load: 4 min Sustain time with 50% load: 8 min sisendpinge range for main operations: 162-290 V sisendpinge alternating range: 207-253 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Ei sidepordid: 2 x RJ11, USB 2.0 Data line surge protection port: 2 x RJ11 - modem/fax joon LED: Jah Sound alarm: Jah arvutikorpuse tüüp: Micro Torn Standard tarvikud: info puudub kaasasolev tarkvara: info puudub Lisaandmed: Connection Type laius: 101 mm kõrgus: 142 mm sügavus: 298 mm Netokaal: 5.3 kg värv: must andmeleht: http://shop.assmann.pl/katalog/produkt
RACK UPS PowerWalker VI 3000 RLP Line-interactive 3000VA 8X IEC C13 USB-B EPO LCD 2U. Made with Line-Interactive technology, the VI RLP UPS is a fully manageable, advanced unit giving you total control over your uninterruptible power system. Each of the 8 UPS outlets can be individually programmed, using dedicated software, adapting the unit to the installation and user requirements. In addition, the VI RLP generates a full sine wave on each of its outputs, ensuring that even sensitive equipment will be fully protected against sudden power outages. With a PF power factor of 0.9 and a high energy efficiency, the VI RLP ensures a long back-up time, which can be further extended by using a battery module. The entire unit is housed in a compact 2U high rack enclosure with a clear LCD screen and the possibility of additional functionality expansion with: SNMP card, cable organiser and other optional accessories. With a PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever the power goes out, the UPS, thanks to specialised circuitry, will instantly change to battery mode, ensuring uninterrupted access to electricity. The switchover will be completely imperceptible, as a result of which you can work uninterrupted and the only sign of a power failure will be an audible signal from the UPS. Full control over any connected equipment A distinguishing feature of the VI RLP series is the ability to separately configure each of the unit's eight sockets, adapting them to given requirements and needs. This can be done using the PowerMaster+ software via the USB interface, using the buttons under the LCD screen, or with an additional SNMP card (10131008). The functionality of each outlet can be extended to include, among other things, allocation to a specific critical section, the operating time of which can be systematically extended by cutting off other equipment from the emergency power supply; in addition, each outlet can be assigned its own start-up/shutdown delay. A substantial set of tools provided by the software provides additional options for monitoring and configuring the entire UPS unit, through a clear and readable user interface. Line-Interactive technology design Thanks to the use of Line-Interactive technology supported by the AVR circuit, the VI RLP is able to significantly improve the quality of the output voltage, so that the connected device will operate without unnecessary disturbances. Using an autotransformer, AVR eliminates any voltage fluctuations between 207 V and 243 V. Whenever this range is exceeded, the UPS will switch to battery mode, maintaining a continuous supply of power with the correct parameters. A short switching time of 6 ms will ensure that even sensitive equipment will not be affected by a sudden power failure. The risk of malfunctions, equipment shutdown or even permanent damage is completely eliminated. Full sine wave Thanks to the use of Line-Interactive technology supported by the AVR circuit, the VI RLP is able to significantly improve the quality of the output voltage, so that the connected device will operate without unnecessary interference. Using an autotransformer, the AVR eliminates any voltage fluctuations between 207 V and 243 V. Whenever this range is exceeded, the UPS will switch to battery mode, maintaining a continuous supply of power with the correct parameters. A short switching time of 6 ms will ensure that even sensitive equipment will not be affected by a sudden power failure. The risk of malfunctions, equipment shutdown or even permanent damage is completely eliminated. The professional solution An uninterruptible power supply is suitable for both the office and the server room. It allows you to finish your work, a web meeting or writing a document when the power goes out. The high performance of the VI 3000 RLP, is due to its careful design using modern technology, ensures that multiple devices can be connected, operated and managed at the same time, without worrying about overloading. The LCD screen allows intuitive monitoring of the equipment's operation, regardless of the position of the device, thanks to its rotatability. Clear markings will allow you to easily read information such as the device's output voltage, overload and current operating mode. It is also possible to configure the equipment and each of the sockets, using the built-in buttons under the LCD screen. Support for USB HID Take full control of the status of your UPS system with support for USB HID, which is the primary driver for monitoring the status of equipment on the most popular systems (Windows, Linux, Mac OS). This makes UPS operation easy and hassle-free. No additional software is required and we can manage the UPS from our computer, in a similar way to a laptop battery.
PowerWalker VI 850 SE Line-Interactive UPS System PowerWalker VI 850 SE provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ-11 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application. Super smart charger to shorten charging time Built-in boost and buck AVR Simulated sine wave Auto restart while AC is recovering Off-mode charging Cold start function USB communication port RJ-11 surge protection Monitoring software included Green function for energy saving Product Features: Capacity: 850VA/480W Input Voltage: 220/230/240VAC Input Voltage Range: 170-280VAC ±7% Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10% Output Frequency: 50Hz or 60Hz Frequency Regulation (Battery Mode): ± 1Hz Output Waveform: Simulated Sine Wave Type Line Interactive USV (UPS) Nominal Power (Watt) 480 Nominal Power (VA) 850 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 24 Display No Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang 2x Colour Black Width (mm) 100 Height (mm) 143 Depth (mm) 279 Weight (kg) 5
- 2000VA / 1800W Online UPS with Power Factor 0.9- C14 Input, 4x IEC C13 Outlet- Batteries included: 4x 12V/9Ah- Online technology with Power Factor 0.9- Human Interface Device (USB HID) support- Wide Input Range 100-300VAC for all environments- Available with integrated batteriesThe PowerWalker VFI 1000-3000 TG and its long-run version VFI 1000-3000 TGS offer a professional solution for home and office environment. UPSs are available with internal batteries or alternatively with stronger charger (6A instead of 1A) for an external battery solution.VFI TG(S) series are detected as HID Power Device by the internal O/S drivers and can be managed without additional software. It finds its application in all dedicated systems for kiosks, ATMs as well as in high security level systems, where additional software is not allowed (i.e. banking).Väljundvõimsuse potentsiaal2000 VAVäljundvõimsus1800 WSisendi tööpinge (minimaalne)80 VSisendi tööpinge (maksimaalne)300 VVäljundi tööpinge (minimaalne)220 VVäljundi tööpinge (maksimaalne)240 VToiteallika sisendsagedus40 - 70Tõhusus90 protsentiHädaabi väljalülitus (EPO)JahAmplituuditegur3:1Sisendi võimsusfaktor0,99Väljundi võimsusfaktor0,9Väljundpinge tundlikkus-2 - 2Väljundsageduse tundlikkus-0.05 - 0.05AC-väljundi tüüpC13 pistikutAC-väljundite arv4 vahelduvvoolu kontaktUSB 2.0 portide arv1RS-232 portide arv1Emergency Power Off (EPO) ühendusJahToetatud akude arv4Aku laadimisaeg4 hTüübipärane varundamisaeg täiskoormusega4,5 minAku mahutavus9 AhAku pinge12 VKujutegurTornToote värvMustEkraanLCDPuhvertoiteallika topoloogiaOnline UPSReaktsiooniaeg4 msJahutuse tüüpAktiivneMüratase50 dBSisendühendusedC14Laadimisvool1.5AKasutamistemperatuur (T-T)0 - 40 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius190 mmSügavus399 mmKõrgus328 mmKaal17,2 kgPakendi laius500 mmPakendi sügavus464 mmPakendi kõrgus324 mmPakendi kaal19,6 kgKaablid kaasa arvatudSisendi toitekaabel, USB kaabelJuhendJahVahendite CDJah
No. of batteries: 1 Voltage: 6 Battery capacity: 9 Environment requirements: - Permissible temperature range for discharge: -15 ~ 50 ° C- The permissible temperature range for charging: -15 ~ 40 degrees C- Permissible temperature range for storage: -15 ~ 40 degrees C- The recommended range average temperature: 25 ° C Dimensions: 151 x 32 x 94 mm Weight: 1.32 Other features: - Maximum discharge current: 130A (5 sec)- Internal resistance: 23 mOhm- Permissible charging voltage (buffering): 13.5 to 13.8 VCD / 25 degrees C- Permissible charging voltage (cycle): 14.4 to 15 VCD / 25 ° C- The recommended maximum charging current: 3.4 A
