UPS-id ja lisaseadmed

AkutehnoloogiaSuletud pliiaku (VRLA)Ühilduvad tootedEaton 3S 700VA, Eaton EX RT, Eaton MXKaal2,38 kgLaius151 mmKõrgus65 mmSügavus94 mmToote värvMetallikKaasasolevate akude arv1

Eaton Ellipse ECO wall-mount kit

PowerWalker VI 1000 LCD UPS

Power Walker UPS Line-Interactive 3000VA, 19" 2U, 8x IEC, RJ11/RJ45, USB, LCD

PowerWalker VI 600 SW With its digitalized PWM-based controller PowerWalker VI 600 SW provides a pure sine wave output especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small and medium office application 600VA Line-Interactive UPS with pure Sine Wave 3x IEC, RJ-11 and RJ-45 Surge Protection USB Connection for monitoring LCD display for status view Built - in boost and buck AVR function Technical Details: Capacity: 600VA / 360W Input Voltage 220/230/240VAC Voltage Range 162-290VAC Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10 % Frequency: 50 or 60Hz Freq. Regulation (Battery Mode): ± 1 Hz (Battery Mode) Waveform: Pure Sine Wave Transfer Time Typical 2-6ms Battery Type: 12V / 7Ah Quantity: 1x Recharge Time: 4h to 90% LCD Display Indicators: AC mode, Battery mode, Load level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault alarm and Low battery alarm Audio Indicators: Battery Mode: Beep every 10 sec Low Battery: Beep every second Fault: Continuous Beep Battery is faulty: Beep every 2 sec UPS overload: Beep 2 times per secon Full Protection Discharge: Yes Overcharge: Yes Overload: Yes Short circuit: Yes Type Line Interactive USV (UPS) Nominal Power (Watt) 360 Nominal Power (VA) 600 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 13 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 3x Colour Black Width (mm) 100 Height (mm) 145 Depth (mm) 328 Weight (kg) 5,2

battery HR1234W F2 12V/9Ah

Rechargeable battery 12V/5Ah, faston 6.3mm

The DPS-200, DPS-300, DPS-500/500DC, DPS-600, and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. They are external RPS units enclosed in solid metal cases with sockets to AC or DC power sources on one end, and connect to a switch’s internal power supply on the other end. They provide a low-cost, simple solution to the problem of an inadvertent failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switch, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the power availability of the switching device.Redundant Power BackupEach D-Link RPS is equipped with an integrated detection circuit that continuously monitors theswitch’s internal power supply. In the event of a power interruption, the redundant power supply isimmediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from going down due to failure of a single network device power supply.Easy and Flexible DeploymentDeployment of a DPS series device does not require any change in the configuration of the LAN switch. With the exception of the DPS-500DC, each RPS is equipped with a universal internal power supply, and can be connected to any AC power source from 90 V AC to 264 V AC, 47 Hz to 63 Hz through a standard AC power cable. The DPS-500DC provides the same output power as the DPS-500, but connects to a DC power source instead of an AC power source.Rack Mounted Power Supplies: DPS-600/700The DPS-600 and DPS-700 are 19-inch standard-size rack mount power supplies designed to improve flexibility in supporting PoE (Power over Ethernet) equipment. The DPS-700 also supports 1+1 power capabilities. When cascading the DPS-700 with a device’s internal power supply, the power system can provide an additional power budget to the device.Koguvõimsus589 WAC-sisendpinge90 - 264AC-sisendsagedus50 - 60Sisendvool7.5Tõhusus80 protsentiÜleliigse toite (RPS) tugiJahOtstarveVõrgulülitiKeskmine tõrkeintervall (MTBF)624961 hToote värvMustKasutamistemperatuur (T-T)0 - 65 °CHoiustamistemperatuur (T-T)-40 - 85 °CSuhteline õhuniiskus kasutamisel (H-H)5 - 95 protsentiLaius441 mmSügavus199 mmKõrgus44 mmKaal3,7 kg