Double-conversion On-line UPS with Lithium-Ion battery to scalable runtime. Ideal UPS for essential power protection needs even in the most unstable power conditions. Includes: Basic UPS signalling RS-232 cable, Battery cable, C13-C14 power cord, Rack mounting brackets, Rack mounting support rails, RJ11 cable, RJ45 cable, Safety guide, Stabilization feet, USB cable, User manual
All required connectors, Battery recycling guide, Installation guide, Reusable packagingModels Supported: BX1300LCD, BX1500LCDHot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replacedPlug-and-Play installation
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
PowerWalker VFD 600 APFC Standby/Off-Line UPS SystemPowerWalker VFD 600 APFC is a Standby/Off-Line UPS for home and office applications and is equipped with a technique, that allows using the full power of UPS, even when used with APFC power supply load. Usually it is required to oversize a UPS to ensure secure backup when connecting an APFC power supply. With the implemented technology this is not needed. Connecting same APFC load it's now possible to choose smaller cost-effective UPS (e.g. PowerWalker VFD 600 APFC instead of usual offline or line interactive 1000 VA model). Besides the lower purchase price it also saves energy cost due to it lower own power consumption.Equipped with 6 Schuko-Type outlets (all with surge protection, 4 with battery backup) these models can be used like a power strip. A special battery compartment enables an easy exchange of the rechargeable battery by the user.Features:Excellent Solution for APFC EquipmentSupporting Full Rating APFC EquipmentHigh Frequency Technology DesignQuick Installation & Easy OperationEasy User-replaceable Battery DesignAuto restart while AC is recoveringCold start functionRJ11/RJ45 surge protectionGreen function for energy saving Type Standby- / Offline-USV (UPS) Nominal Power (Watt) 600 Nominal Power (VA) 300 Number of Batteries 1 Max. Backup Time at Full Load (min.) 2 Max. Backup Time (100W Load / Min.) 17 Display No Display Warning Message Visual / Audible Overvoltage Protection RJ11/RJ45 (Input/Output) USB No Schuko-Out 6x IEC-Out No Colour Black Width (mm) 125 Height (mm) 86 Depth (mm) 320 Weight (kg) 2,8
Tootja: roheline Cell Tootegrupp: UPS Apparent power: 600 VA Real power: 360 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 10 ms Number and type of outlets with power maintenance: 6 x SCHUKO Input ühenduse tüüp: kaabel koos PL plug (16A) Sustain time with full load: 5 min Sustain time with 50% load: 3 min Cold start: Ei (AVR) Automatic pinge Regulation: Ei Sine while working on aku: Ei sidepordid: USB Data line surge protection port: info puudub LED: LCD ekraan Sound alarm: Jah arvutikorpuse tüüp: info puudub Standard tarvikud: toitekaabel kaasasolev tarkvara: Jah
Allows control and monitoring of multiple inverters through RJ-45 network connection; Real-time dynamic graphs of UPS / PowerManager data; Historic data log stored in centralized PC database
Fortron FSP Line Interactive UPS FP-800/ 800VA, 480W/ AVR/ 2 Schuko Output Sockets. Excellent microprocessor control guarantees high reliability •Boost and buck AVR for voltage stabilization •Auto restart while AC is recovering •Simulated sine wave •Off-mode charging •Cold start function •Generator compatible
The Eaton Ellipse PRO 650–1600VA is a line interactive UPS specifically developed to protect workstations running demanding applications. The Ellipse PRO features an LCD display for real-time status and measurements. It also features EcoControl power outlets, which enable energy savings up to 20 percent and Advanced Surge Reduction (ASR) that complies fully with the requirements of the IEC 616431-1 standard.LCD display for real-time status and measurementsDelivers clean output with Automatic Voltage Regulation (AVR, with buck and boost)EcoControl function helps you save up to 20% energy compared to previous generation UPSsIncludes a high performance surge-protection device which complies with IEC 61643-1 standardUp to 8 outlets to connect your PC & peripheralsConvenient extra-flat design for easy installation in any office environmentUSB port & Eaton UPS Companion software that enables safe system shutdown, energy usage metering and easy configuration of UPS settingsProtects data connections such as Ethernet, internet and telephone lines
Original part number ELP850IEC Product name UPS Eaton Ellipse PRO 850 IEC Producer Eaton Class of product UPS Apparent power 850 VA Real power 510 Watt UPS architecture line-interactive Max. time of switching on battery 4 ms Number and type of outlets with power maintenance 3 x IEC320 C13 (10A) Number and type of outputs with surge protection 1 x IEC320 C13 (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 1 min Sustain time with 50% load 9 min Input voltage range for main operations 165-285 V Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery No Communication ports USB Data line surge protection port RJ11 - modem/fax line, DSLRJ45 - linia 10/100/1000BaseT LED LCD display Sound alarm Not Available Type of computer case Tower1U Rack Standard accessory CD with softwareUSB cable Software included CD with drivers Width 260 mm Height 285 mm Depth 82 mm Net weight 7.3 kg Datasheet Datasheet
Original part number EG-UPS-PS2000-01 Product name UPS Energenie by Gembird 2000VA, Pure sine, 4x IEC 230V OUT, USB-BF, LCD Display Producer Gembird Class of product UPS Apparent power 2000 VA Real power 1600 Watt UPS architecture line-interactive Max. time of switching on battery 10 ms Number and type of outlets with power maintenance 4 x IEC320 C13 (10A) Number and type of outputs with surge protection 4 x IEC320 C13 (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 6 min Sustain time with 50% load 12 min Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery Yes Communication ports USB Data line surge protection port RJ45 - modem/fax line, DSL, 10/100BaseTX LED LCD display Sound alarm Work on batteryMains breakdownconsiderable battery flat Type of computer case Desktop Standard accessory Manual (user guide)power supply cableUSB cable Software included no data Width 215 mm Height 412 mm Depth 144 mm Net weight 18.5 kg Colour Black Additional information Intelligent overload- and short-circuit protectionLCD display and LED status indicationInternal battery with overcharge and over-discharge protectionAudible and visual alarmsWaveform: sine, 5% distortion at linear load, PF > 0.6Input: AC 220V±25%, 50Hz/60Hz ±10%Output: AC 220V±12%, 50Hz/60Hz ±1% (AC 220V±5% at inverter mode)Backup time: 10...30mins (depends on the load)Battery: sealed lead-acid 12V/9Ah, F2 terminals x 3 pcsCharge time: up to 12 hoursCharging current: up to 1.2 ANoise: Sockets: C14 input, 4 outputs x C13; USB-BF connector
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.SuguSisestatav konnektor/sisekonnektorToote värvKollane, MustKaabli pikkus0,61 mPistmik 1C14 pistikutPistmik 2C13 pistikutRoHS-vastavusJahSisendvool10Kasutamistemperatuur (T-T)0 - 70 °CHoiustamistemperatuur (T-T)-25 - 75 °CSuhteline õhuniiskus kasutamisel (H-H)20 - 80 protsentiSuhteline õhuniiskus (H-H) hoiustamisel20 - 80 protsentiKasutamiskõrgus0 - 3000 mLaius70 mmSügavus40 mmKõrgus240 mmKaal700 g
The PowerWalker VFI 1000-3000 TG and its long-run version VFI 1000-3000 TGS offer a professional solution for home and office environment. UPSs are available with internal batteries or alternatively with stronger charger (6A instead of 1A) for an external battery solution. VFI TG(S) series are detected as HID Power Device by the internal O/S drivers and can be managed without additional software. It finds its application in all dedicated systems for kiosks, ATMs as well as in high security level systems, where additional software is not allowed (i.e. banking).
Type power strip, Classification VFD, Apparent power 600VA, Active power 360W, Voltage 230V, Outputs 6x Schuko, 2x USB, Autonomy 7min (50%), Charging time 8h, Weight 2.60kg, Dimensions (WxHxD) 159x95x305mm, PPF3602301
