Sealed, maintenance free, lead-acid battery, VRLA type, with 5 years designed life.Specially designed for alarm systems.Universal battery for standby and cycle use.
An extension of factory warranty coverage beyond the original factory warranty term.Technical supportExtended coverageFree shippingTechnical supportParts includedWarranty Duration OptionsAnnual site visitService Summary Report
An extension of factory warranty coverage beyond the original factory warranty term.Technical supportFree shippingTechnical supportParts includedWarranty Duration Options
Card chassis provides additional SmartSlots for APC UPSs.UPS Management Peripheral Chassis. Add up to three additional SmartSlot accessories to APC UPSs that have an existing SmartSlot already in use1U rackmountable. Hardware includedOptionally power the unit using a 24V DC adapter (not included)
See erikvaliteediga mitme pistikupesa riba on valmistatud vastupidavast plastist ja sellel on kruviaugud kiireks ja turvaliseks paigaldamiseks. Keskmiselt 89 protsendil Saksamaa elanikest on igas toas kaks kuni kuus pistikupesa ja 10 protsendil rohkem kui seitse*. Kui aga isegi sellest ei piisa, on saadaval BACHMANNi SMART. Eelkõige täidab löögikindlast plastikust valmistatud klassikaline pistikupesa riba täpselt seda funktsiooni, mida temalt oodatakse: voolu jaotamist. Lisaks on SMARTil mitmeid mugavaid omadusi, mis muudavad selle kasutamise veelgi mugavamaks, näiteks 35° võrra pööratavad pistikupesa sisestused ja nikeldatud maanduskontaktid. Sellel on ka praktiline kaabli tagasipööramine, mis hoiab ära soovimatu kaabli segunemise. Sulgur takistab ebameeldivaid õnnetusi ning kruviaugud võimaldavad kiiret ja turvalist paigaldamist. Toitekaabel ühendatakse süstevormitud täisnurksete pistikutega, millel on kaks maanduskontakti. Tänu valgustatud 2-pooluselisele kiiklülitile on selgelt näha, kas SMART on sisse- või väljalülitatud.SMART toiteallikasVärv: mustSuurendatud puudutuskaitsega6x mustad turvapistikupesadToitejuhe 1,5 m H05VV-F 3G1,5 mm²Turvalise nurgapistikugaPakendatud polükotti
PowerWalker VI 600 SW With its digitalized PWM-based controller PowerWalker VI 600 SW provides a pure sine wave output especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small and medium office application 600VA Line-Interactive UPS with pure Sine Wave 3x IEC, RJ-11 and RJ-45 Surge Protection USB Connection for monitoring LCD display for status view Built - in boost and buck AVR function Technical Details: Capacity: 600VA / 360W Input Voltage 220/230/240VAC Voltage Range 162-290VAC Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10 % Frequency: 50 or 60Hz Freq. Regulation (Battery Mode): ± 1 Hz (Battery Mode) Waveform: Pure Sine Wave Transfer Time Typical 2-6ms Battery Type: 12V / 7Ah Quantity: 1x Recharge Time: 4h to 90% LCD Display Indicators: AC mode, Battery mode, Load level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault alarm and Low battery alarm Audio Indicators: Battery Mode: Beep every 10 sec Low Battery: Beep every second Fault: Continuous Beep Battery is faulty: Beep every 2 sec UPS overload: Beep 2 times per secon Full Protection Discharge: Yes Overcharge: Yes Overload: Yes Short circuit: Yes Type Line Interactive USV (UPS) Nominal Power (Watt) 360 Nominal Power (VA) 600 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 13 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 3x Colour Black Width (mm) 100 Height (mm) 145 Depth (mm) 328 Weight (kg) 5,2
PowerWalker VI 650 SE - Line-Interactive UPS System PowerWalker VI 650 SE provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ-11 surge protection, and green power function for energy saving. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application. Super smart charger to shorten charging time Built-in boost and buck AVR Simulated sine wave Auto restart while AC is recovering Off-mode charging Cold start function USB communication port RJ-11 surge protection Monitoring software included Green function for energy saving Product features: Capacity: 650VA/360W Input Voltage: 220/230/240VAC Input Voltage Range: 170-280VAC ±7% Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10% Output Frequency: 50Hz or 60Hz Frequency Regulation (Battery Mode): ± 1Hz Output Waveform: Simulated Sine Wave Type Line Interactive USV (UPS) Nominal Power (Watt) 360 Nominal Power (VA) 650 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 20 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang 2x Colour Black Width (mm) 100 Height (mm) 143 Depth (mm) 279 Weight (kg) 4,4
Original part number 3S700FR Product name UPS Eaton 3S 700 FR Producer Eaton Class of product UPS Apparent power 700 VA Real power 420 Watt UPS architecture off-line (standby) Max. time of switching on battery 6 ms Number and type of outlets with power maintenance 6 x PL (10A) Number and type of outputs with surge protection 3 x EURO (10A) Input connector type Cable with PL plug (10A) Sustain time with full load no data Sustain time with 50% load 9 min Input voltage range for main operations 161-284 V Cold start Yes (AVR) Automatic Voltage Regulation No Sine while working on battery No Communication ports USB Data line surge protection port RJ11 - modem/fax line, DSLRJ45 - modem/fax line, DSL, 10/100BaseTX LED required battery changebattery chargingWork on battery Sound alarm breakdown Type of computer case Desktop Standard accessory USB cable Software included Intelligent Power Protector v1.10 for Microsoft Windows Systems and Unix/Linux Width 170 mm Height 86 mm Depth 335 mm Net weight 3.8 kg Colour Black
PowerWalker VI 3000 RT HIDPowerWalker VI 3000RT HID Line-Interactive USVPowerWaker VI3000RT HID is a Line-Interactive UPS with pure sine wave output and designed for fulfiling high quality power protection demant. It offes full protection for devices such as servers, network/telephone communication systems as well as for industrial applications.With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19" rack systems or used as tower.Features: 3000VA Line-Interactive UPS with 0.9 Output Power Factor2-in-1 Rack/Tower Design with LCD display9 IEC Outlets, Dry out contacts, EPO function, RJ11/45USB & RS-232 Connection for monitoringOptional: SNMP module, AS/400 card, MBS, ATS, Rack installation kit, Battery PackDimension: 438 x 608 x 86,5 mmWeight: 30,42 kg Type Line Interactive USV (UPS) Nominal Power (Watt) 2.700 Nominal Power (VA) 3.000 Number of Batteries 6 Max. Backup Time (100W Load / Min.) 231 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 9x Colour Black Width (mm) 608 Height (mm) 86,5 Depth (mm) 438 Weight (kg) 30,42
Features1200VA / 600W Line-Interactive UPSC14 Input, 6x IEC C13 OutletBackup time: 11min under half loadCompact tower design with LCDUSB portPowerWalker VI SE LCD provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ-11 surge protection. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application.Super smart charger to shorten charging timeBuilt-in boost and buck AVRSimulated sine waveAuto restart while AC is recoveringOff-mode chargingCold start functionUSB communication portRJ11/RJ45 surge protectionMonitoring software includedLCD Display show UPS status Type Line Interactive USV (UPS) Nominal Power (Watt) 600 Nominal Power (VA) 1200 Number of Batteries 2 Display LCD USB 1x USB-B IEC-Out 6x Colour Black Width (mm) 139 Height (mm) 195 Depth (mm) 365 Weight (kg) 8,9
Original part number OL1500ERTXL2U Product name Cyber Power UPS OL1500ERTXL2U 1350W Rack/Tower 2U (IEC C13) Producer Cyber Power Class of product UPS Apparent power 1500 VA Real power 1350 Watt UPS architecture on-line double conversion Max. time of switching on battery 0 ms Number and type of outlets with power maintenance 8 x IEC320 C13 (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 3 min Sustain time with 50% load 9 min Input voltage range for main operations 200-240 V Cold start Yes (AVR) Automatic Voltage Regulation No Sine while working on battery Yes Communication ports serial portUSB Data line surge protection port RJ11 - modem/fax lineRJ45 - modem/fax line LED Load level indicatorbattery chargingbreakdown Sound alarm Battery lowOverloadWork on batteryrequired battery changebreakdown Type of computer case 2U Rack Standard accessory no data Software included PowerPanel Business Edition Width 433 mm Height 88 mm Depth 430 mm Net weight 18 kg Colour Black Additional information Emergency power off (EPO)Relay outputBattery:12V / 9AH x 3
Tüüp: Line InteractiveSisendsagedus: 50/60 HzKuvatav informatsioon: Staatuse ja kontrolli konsoolHoiatussignaal: Aku režiim / Ülekoormus / Tühja aku indikaator
Original part number EG-UPS-PS3000-01 Product name UPS Energenie by Gembird 3000VA, Pure sine, 4x IEC 230V OUT, USB-BF, LCD Display Producer Gembird Class of product UPS Apparent power 3000 VA Real power 2400 Watt UPS architecture line-interactive Max. time of switching on battery 10 ms Number and type of outlets with power maintenance 4 x IEC320 C13 (10A) Number and type of outputs with surge protection 4 x IEC320 C13 (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 6 min Sustain time with 50% load 12 min Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery Yes Communication ports USB Data line surge protection port RJ45 - modem/fax line, DSL, 10/100BaseTX LED LCD display Sound alarm Work on batteryMains breakdownconsiderable battery flat Type of computer case Desktop Standard accessory Manual (user guide)power supply cableUSB cable Software included no data Width 336 mm Height 467 mm Depth 190 mm Net weight 28.1 kg Colour Black Additional information Intelligent overload- and short-circuit protectionLCD display and LED status indicationInternal battery with overcharge and over-discharge protectionAudible and visual alarmsWaveform: sine, 5% distortion at linear load, PF > 0.6Input: AC 220V±25%, 50Hz/60Hz ±10%Output: AC 220V±12%, 50Hz/60Hz ±1% (AC 220V±5% at inverter mode)Backup time: 10...30mins (depends on the load)Battery: sealed lead-acid 12V/9Ah, F2 terminals x 4 pcsCharge time: up to 12 hoursCharging current: up to 1.7 ANoise: Sockets: C14 input, 4 outputs x C13; USB-BF connector
With its digitalized PWM-based controller PowerWalker VI SW provides a pure sine wave output especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small and medium office application. Features: - 800VA / 480W Line-Interactive UPS - Schuko Input, 2x Schuko Outlet - Backup time: 5min under half load - Compact tower design with LCD - USB port
Tootja: Cyberlink Tootegrupp: Power Distribution Units rack 19" (PDU) Input ühenduse tüüp: IEC320 C20 (16A) Väljundeid: 12 tk väljundite arv 10A IEC C13: 12 tk toitejuhtme pikkus: 3.05 m nominaalpinge: 200 V AC, 240 V AC pinge: 16 A sagedus: 50 Hz, 60 Hz sisseehitatud filter RJ-11 telefoniliinile: Ei häirevastane filter (EMI/RFI): Ei seina kinniti: Ei Racki installeerimise võimalus 19": Jah pikkus: 445 mm laius: 38 mm kõrgus: 44 mm, 1 U Netokaal: 2 kg värv: must Lisainfo: spetsifikatsioon [LINK]
SNMP Cards offer IP Adress and WebInterface for most convinient monitoring. SNMP modules allows remote monitor and manage multiple UPSs from anywhere with internet access. Integrated web access will leverage internet capability of SNMP card to remotely program or shut down UPSs. Equipped with SNMP card, power conditions of all UPSs can be monitored anytime/anywhere even through the UPS units are located in different floors/locations. Mini NMC Card fits for: VFI 20000-30000-40000 TP 3/3 BX-BE-BI VFI 15000 MP 3/3 VFI 1000-2000-3000 T/E LCD
Original part number VI 800 SW Product name Power Walker UPS Line-Interactive 800VA 3x IEC C13, PURE SINE, RJ11/RJ45,USB,LCD Producer Power Walker Class of product UPS Apparent power 800 VA Real power 480 Watt UPS architecture line-interactive Max. time of switching on battery 6 ms Number and type of outlets with power maintenance 3 x IEC320 C13 (10A) Input connector type IEC320 C14 (10A) Sustain time with full load 0.2 min Sustain time with 50% load 5 min Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery Yes Communication ports USB Data line surge protection port RJ11 - modem/fax line, DSL LED N/A - LCD Display Sound alarm Battery lowby-pass modeMains breakdownOverloadWork on battery Type of computer case Desktop Standard accessory Power CableUSB cableCD with softwarepower supply cable 1.8m IEC320 C13/C14 Software included ViewPower (Shutdown Software) Width 328 mm Height 100 mm Depth 145 mm Net weight 6 kg Colour Black Datasheet Datasheet
Original part number VI 1000 LCD Product name Power Walker UPS Line-Interactive 1000VA 2x 230V PL, 2x IEC, RJ11/RJ45, USB, LCD Producer Power Walker Class of product UPS Apparent power 1000 VA Real power 600 Watt UPS architecture line-interactive Max. time of switching on battery 6 ms Number and type of outlets with power maintenance 2 x PL (10A)2 x IEC320 C13 (10A) Number and type of outputs with surge protection 2 x PL (10A)2 x IEC320 C13 (10A) Input connector type Cable with PL plug (10A) Sustain time with full load 1 min Sustain time with 50% load 5 min Input voltage range for main operations 220-240 V Input voltage alternating range 160-290 V Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery No Communication ports USB Data line surge protection port RJ45 - modem/fax line, DSL, 10/100BaseTX LED LCD display Sound alarm Work on batteryMains breakdownconsiderable battery flat Type of computer case Desktop Standard accessory manual (user guide)power supply cableUSB cableCD with software Software included ViewPower (Shutdown Software) Width 350 mm Height 146 mm Depth 165 mm Net weight 8 kg Gross weight 9 kg Colour Black Datasheet Datasheet Additional information Recharge Time 4h for 90%Auto restart while AC is recoveringSimulated sine wave
Type power strip, Classification VFD, Apparent power 600VA, Active power 360W, Voltage 230V, Outputs 6x Schuko, 2x USB, Autonomy 7min (50%), Charging time 8h, Weight 2.60kg, Dimensions (WxHxD) 159x95x305mm, PPF3602301
Emergency power supply VI 1200 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger An excellent UPS designed to work with even the most demanding equipment. The elegant casing houses precise circuits. They are capable of producing a pure sine wave at the output and do not lose the efficiency of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display thanks to which even an inexperienced user can easily read the UPS status. With the PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever there is a power outage, the UPS, thanks to specialized systems, will immediately change the operating mode to battery power, ensuring uninterrupted access to electricity. Switching the power source will be completely imperceptible, so you can work without any problems, and the only sign of lack of power will be an acoustic signal from the UPS. A universal solution for everyone The uninterruptible power supply is perfect for both the office and home. It will allow you to complete work, an internet meeting or watch your favorite movie whenever there is a power outage. If you ever need to replace the batteries in your device, simply remove the front cover, disconnect and remove the old batteries, and replace them with new ones. Thanks to the use of an LCD display that optimizes the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to easily read information such as: voltage at the device's output, battery status or current operating mode. Full sine wave Each time the UPS enters battery backup mode, full sine wave alternating current is generated and used to maintain connected devices. This is a power source identical to that obtained from the mains, making it ideal for trouble-free operation of any device. The advantage of this solution is the ability to power even the most sensitive systems that need the most stable possible power source. Thanks to a wide range of applications, the VI CSW series uninterruptible power supplies can be used both at home and in the office. At home, they will power the central heating furnace or enable the operation of the garage door, and in the office, they will power multifunctional devices and laser printers. Additional areas of application include: aquariums, monitoring and security systems and devices with electric motors. Made in Line-Interactive technology Thanks to the use of Line-Interactive technology supported by the AVR system, VI 1200 CSW is able to significantly improve the quality of the output voltage, thanks to which the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates all voltage fluctuations in the range from 207 V to 243 V. Whenever this range is exceeded, the UPS will switch to battery power mode, maintaining continuity of power supply with the correct parameters. The short switching time of 6 ms ensures that even sensitive devices will not experience a sudden power outage. The risk of incorrect operation, turning off the device or even its permanent damage is completely eliminated. Large number of ports The UPS is equipped with 4 Schuko sockets. Each of them guarantees surge protection for the connected equipment, while protecting it against voltage spikes in the electrical network. Additionally, two sockets provide support for devices in the event of a power outage, allowing the equipment to operate uninterrupted. Additionally, the UPS has been enriched with two RJ-45 ports (input/output) protecting against overvoltages on the Ethernet line, which could arise, for example, as a result of damage to the power installation, and as a result of which the connected device would be irreversibly damaged. The USB-A ports (2.1 A) located on the front of the device can be successfully used to power and charge devices such as phones, power banks, or wireless headphones. In this way, we save ports on our computer, and we use a UPS charging station to replenish the batteries in our mobile equipment. Support for USB HID Extra control If there is a need for even more precise configuration of the UPS or its constant monitoring, the manufacturer has provided dedicated software for the device called ViewPower. The software is available for every popular operating system in multiple languages and provides: Possibility to monitor multiple devices at once Power analysis charts, UPS data histories and its graph (voltage, frequency, load, battery charge) User notification via e-mail, SMS, sound Password access protection Remote access Possibility to set a turn-on and turn-off schedule, perform battery tests and check sockets
