Erilised omadused Regolazione automatica del voltaggio in output (AVR) Interfaccia USB Indicatori status del LED Protezione da corto circuiti Protezione da sovraccarichi e fulmini Allarmi sonori e visivi Protezione da sovraccaricamento e sovrascaricamento Protezione presa Fax/Modem/Telefono MuuInput: AC 220V±25%, 50Hz/60Hz ±10% Output: AC 220V±10%, 50Hz/60Hz ±0.5% (on battery) Switching time: no more than 10 ms Backup time: 8...20mins (depends on the load) Battery: sealed lead-acid 12V/7Ah x 2pcs Charge time: up to 12 hours Sockets: Schuko EU type, 1 input, 3 outputs; telephone RJ11x2pcs connectors; USB-BF connector Operating conditions: 0°C~40°C, at humidity 10~90%RH non condensing Power: 1200VA Dimensions: 382x222x124 mm Product weight: 10.4 kg TüüpUPS
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
PowerWalker AVR 600 - Voltage regulator 600VA Voltage Regulator 3x Schuko output receptacles Modem/Phone Surge Protection Overload, short circuit and over-temperature protection Compact size and stylist design Stylist design with colourful panels for your consideration 3 local receptacles for easy use Built-in thermal sensor for over-temperature protection and auto recovery system Capacity: 600 VA/360 W Voltage: 220 / 230 / 240V AC Frequency Range: 50Hz Surge Rating: (LV/HV) 430/250 Joules Dimensions: 166 mm x 161 mm x 87 mm (TxBxH) The PowerWalker AVR 600 is a voltage regulator which accepts wide input voltage range (180 -264V AC). It provides stable output voltage through boost and buck stabilizer. The built-in thermal sensor provides over-temperature protection and recover, while abnormal situation is eliminated. PowerWalker AVR 600 includes a selectable Master/Slave function to reduce idle power wastage. Type Automatic Voltage Regulator Nominal Power (Watt) 360 Nominal Power (VA) 600 Schuko-Ausgang 3x Colour Black Width (mm) 161 Height (mm) 87 Depth (mm) 166 Weight (kg) 1,7
A Line- Interactive UPS offers backup function and automatic voltage regulation (AVR). AVR regulates voltage to the appropriate level by decreasing it during surges or swells or increasing it during a sag or burnout. The advantage is a better protection for sensitive IT- and household equipment and avoids damage caused by voltage up- and downturn.AVR function also benefits the battery lifetime. As long as voltage level is not lower than 70% to 90%, or higher than 110% to 125% AVR will adjust voltage to normal level. I case the voltage drops to a lower or higher level, the UPS will directly switch to battery mode to avoid dropouts and damage of the connected equipment.Line- Interactive UPS offers USB port (RS-232) to connect to a multitude of operating systems for monitoring voltage, power and battery status.Line- Interactive UPS are designed for medium cost application with moderate load levels- 850VA Line-Interactive UPS- 4x IEC Outlet, RJ-11 (in/out)- USB Connection for monitoring- Cold DC start and AVR function- Green Power Function for energy savingColour blackDevice Type Standalone UPSPower Rating 850 VA / 480 WattInput Voltage 170-280 VBuffering TimeFull Load: 1 minute(s)Half Load: 6 minute(s)Ports / InterfacesUSB: 1xOutputsType 1 4x IECconnected to Battery NoProtectionLine Protection: 1x RJ-11Alert Messagesoptical: LED-Anzeige for sichtbare StatusanzeigeOperating TemperatureOutput V230 VACOperating via Battery: 230 VAC (±10 VAC)Product dimensions 100x143x279 mmWeight 5 kg
Features850VA / 480W Line-Interactive UPSC14 Input, 4x IEC C13 OutletUSB Connection for MonitoringBackup time: 6min under half loadCompact tower design with LCDLCD display to show UPS statusCold DC start and AVR functionPowerWalker VI SE LCD provides comprehensive protection and high power density in small and economic package. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ-11 surge protection. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small office application.Super smart charger to shorten charging timeBuilt-in boost and buck AVRSimulated sine waveAuto restart while AC is recoveringOff-mode chargingCold start functionUSB communication portRJ-11 surge protectionMonitoring Software includedLCD display for status view Type Line Interactive USV (UPS) Nominal Power (Watt) 480 Nominal Power (VA) 850 Number of Batteries 1 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 4x Colour Black Width (mm) 139 Height (mm) 226 Depth (mm) 345 Weight (kg) 5,54
Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads.Konnektori suguMeessoost/naissoostKaabli värvMustKaabli pikkus3 mPistmik 1C19 pistikutPistmik 2C20 pistikutSisendpinge230Sisendvool16Kasutamistemperatuur (T-T)0 - 75 °CHoiustamistemperatuur (T-T)-25 - 75 °CSuhteline õhuniiskus kasutamisel (H-H)20 - 80 protsentiSuhteline õhuniiskus (H-H) hoiustamisel20 - 80 protsentiKasutamiskõrgus0 - 3000 mKõrgus mittekasutamisel0 - 15000 mLaius230 mmSügavus45 mmKõrgus230 mmKaal510 gPakendi laius230 mmPakendi sügavus45 mmPakendi kõrgus230 mmPakendi kaal510 gMõõdud (l x s x k)230 x 45 x 230 mmKaal (mittemeetriline)1.124
The PowerWalker VFI 1000-3000 TG and its long-run version VFI 1000-3000 TGS offer a professional solution for home and office environment. UPSs are available with internal batteries or alternatively with stronger charger (6A instead of 1A) for an external battery solution. VFI TG(S) series are detected as HID Power Device by the internal O/S drivers and can be managed without additional software. It finds its application in all dedicated systems for kiosks, ATMs as well as in high security level systems, where additional software is not allowed (i.e. banking).
Original part number VFI 1000C LCD Product name Power Walker UPS On-Line 1000VA, 3x IEC, USB/RS-232, LCD, Tower Producer Power Walker Class of product UPS Apparent power 1000 VA Real power 800 Watt UPS architecture on-line Max. time of switching on battery 0 ms Number and type of outlets with power maintenance 3 x IEC320 C13 (10A) Number and type of outputs with surge protection 2 x IEC320 C13 (10A) Input connector type no data Sustain time with full load no data Sustain time with 50% load no data Input voltage range for main operations 110-300 V Input voltage alternating range 110-300 V Cold start Yes (AVR) Automatic Voltage Regulation No Sine while working on battery Yes Communication ports USB 2.0 Data line surge protection port N/A LED LCD display Sound alarm Yes Type of computer case Tower Standard accessory CD with software Software included ViewPower (Shutdown Software) Width 145 mm Height 220 mm Depth 282 mm Colour Black Datasheet
Tootja: Ever Tootegrupp: UPS Apparent power: 1200 VA Real power: 780 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 3 ms Number and type of outlets with power maintenance: 1 x PN-E-93201:1997 (16A), 1 x UNI-SCHUKO Number and type of outputs with surge protection: 2 x PN-E-93201, 3 x IEC320 C13 (10A) Input ühenduse tüüp: kaabel koos PL plug (10A) Sustain time with full load: 3 min Sustain time with 50% load: 7 min sisendpinge range for main operations: 168-264 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Jah sidepordid: USB HID Data line surge protection port: info puudub LED: work on joon, Work on aku, aku laadimine, UPS overload, short-circuit Sound alarm: aku low, UPS overload, Work on aku, short-circuit arvutikorpuse tüüp: 2U Rack, Rack 19" Standard tarvikud: USB kaabel, Manual (kasutusjuhend) lisafunktsioonid: Mounting on built-on front handles kaasasolev tarkvara: PowerSoft - to free download from ever.eu Lisaandmed: aku:, 12V / 5Ah x 2 laius: 485 mm kõrgus: 88 mm sügavus: 200 mm Netokaal: 11.4 kg Brutokaal: 12.1 kg värv: must andmeleht: spetsifikatsioon [LINK]
Product kirjeldus: PowerWalker VI 1000 SCL FR - UPS - 600 vatti - 1000 VA seadme tüüp: UPS - external kaal: 8.2 kg sisendpinge: AC 230 V väljundpinge: AC 230 V ± 10% Power maht: 600 vatti / 1000 VA Sisendühendused: 1 x power CEE 7/7 Output Ühendusi: 4 x power Type E aku: - 7 Ah Batteries kogus: 2 kestvus (Up To): 0.5 min at full load võrguseadeing: USB mõõtmed (WxDxH): 13 cm x 32 cm x 18.2 cm
