Very high power density, On-Line power protection with lithium-ion batteries and scalable backup time options. The APC Smart-UPSTM Ultra is the smallest and lightest 5kW Li-Ion UPS The world's most popular UPS is now available with extended battery life and a compact design. APC's Smart-UPS Ultra offers reliable, premium power protection to ensure network and data availability. Designed for local edge environments and micro data centers, the Smart-UPS Ultra provides consistent and reliable connectivity in the most critical moments. The lightweight and compact size of the UPS and the auto-rotating display allow hassle-free installation. Longer UPS battery life and lower maintenance costs result in a lower total cost of ownership over 10 years. It's confidence in a connected world. Rack/tower mountable Save extra effort or investment when migrating from tower to rack with auto-rotating LCD display and smart installation kits. Flash updateable firmware Remote installation of firmware maintenance releases via FTP. Plug-and-play external batteries Provides clean, uninterrupted power to your loads while adding extra runtime to your UPS. High resolution LCD display with virtual touch keys Quickly know device and power status with clear indications. Compatible with InfraStruXure Manager Enables centralized management via APC InfraStruXure Manager. Web-based management Most models provide options for remote management of UPS power over the network. Many of them do not have a built-in NMC card. Serial connectivity Provides management of the UPS through the serial port.
No. of batteries: 1 Voltage: 6 Battery capacity: 9 Environment requirements: - Permissible temperature range for discharge: -15 ~ 50 ° C- The permissible temperature range for charging: -15 ~ 40 degrees C- Permissible temperature range for storage: -15 ~ 40 degrees C- The recommended range average temperature: 25 ° C Dimensions: 151 x 32 x 94 mm Weight: 1.32 Other features: - Maximum discharge current: 130A (5 sec)- Internal resistance: 23 mOhm- Permissible charging voltage (buffering): 13.5 to 13.8 VCD / 25 degrees C- Permissible charging voltage (cycle): 14.4 to 15 VCD / 25 ° C- The recommended maximum charging current: 3.4 A
Original part number CPS600E Product name CyberPower EPS CPS600E (1xFR) Producer Cyber Power Class of product UPS Apparent power 600 VA Real power 420 Watt UPS architecture line-interactive Max. time of switching on battery 10 ms Number and type of outlets with power maintenance 1 x French Input connector type IEC 320 C13 (10A) Sustain time with full load no data Sustain time with 50% load no data Input voltage range for main operations 140-300 V Cold start Yes (AVR) Automatic Voltage Regulation Yes Sine while working on battery Yes Communication ports N/A Data line surge protection port no data LED Work on battery Sound alarm Work on batteryBattery lowOverload Type of computer case Metal Standard accessory no data Additional functions no data Software included no data Width 240 mm Height 162 mm Depth 90 mm Net weight 4.1 kg Colour Yellow
Tootja: Power Walker Tootegrupp: UPS Apparent power: 650 VA Real power: 360 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 8 ms Number and type of outlets with power maintenance: 2 x PL (10A) Number and type of outputs with surge protection: 2 x PL (10A) Input ühenduse tüüp: kaabel koos PL plug (10A) Sustain time with full load: 1 min Sustain time with 50% load: 5 min sisendpinge range for main operations: 220-240 V sisendpinge alternating range: 170-280 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Ei sidepordid: USB Data line surge protection port: RJ11 - modem/fax joon, DSL LED: work on joon, Work on aku Sound alarm: Work on aku, Mains breakdown, considerable aku flat arvutikorpuse tüüp: Desktop, compact size Standard tarvikud: manual (kasutusjuhend), toiteplokikaabel, USB kaabel, CD tarkvaraga lisafunktsioonid: akumulaator 12V 7Ah kaasasolev tarkvara: WinPower (Shutdown tarkvara) laius: 143 mm kõrgus: 100 mm sügavus: 279 mm Netokaal: 4.4 kg Brutokaal: 5.5 kg värv: must andmeleht: andmeleht Lisaandmed: Recharge Time 6h for 90%, Auto restart while AC is recovering, Simulated sine wave
Tootja: Power Walker Tootegrupp: UPS Apparent power: 1200 VA Real power: 720 vatti UPS arhitektuur: sisendteraktiivne Max. time of switching on aku: 2 ms Number and type of outlets with power maintenance: 4 x IEC320 C13 (10A) Input ühenduse tüüp: kaabel koos PL plug (10A) Sustain time with full load: 3.1 min Sustain time with 50% load: 11.5 min sisendpinge range for main operations: 220-240 V sisendpinge alternating range: 170-280 V Cold start: Jah (AVR) Automatic pinge Regulation: Jah Sine while working on aku: Ei sidepordid: USB 2.0 Data line surge protection port: RJ11/RJ45 LED: work on joon, Work on aku Sound alarm: Work on aku, Mains breakdown, considerable aku flat arvutikorpuse tüüp: Desktop Standard tarvikud: Manual (kasutusjuhend), toiteplokikaabel, USB kaabel, CD tarkvaraga, toiteplokikaabel 1.8m IEC320 C13/C14 kaasasolev tarkvara: WinPower (Shutdown tarkvara) laius: 88 mm kõrgus: 430 mm sügavus: 438 mm värv: must
Emergency power supply VI 1200 CSW line-interactive 1200VA 4x230V schuko USB-B 2xUSB charger An excellent UPS designed to work with even the most demanding equipment. The elegant casing houses precise circuits. They are capable of producing a pure sine wave at the output and do not lose the efficiency of the power supply itself. Designed for convenient and intuitive operation, it has a built-in LCD display thanks to which even an inexperienced user can easily read the UPS status. With the PowerWalker uninterruptible power supply, you don't have to worry about losing power in the network. Whenever there is a power outage, the UPS, thanks to specialized systems, will immediately change the operating mode to battery power, ensuring uninterrupted access to electricity. Switching the power source will be completely imperceptible, so you can work without any problems, and the only sign of lack of power will be an acoustic signal from the UPS. A universal solution for everyone The uninterruptible power supply is perfect for both the office and home. It will allow you to complete work, an internet meeting or watch your favorite movie whenever there is a power outage. If you ever need to replace the batteries in your device, simply remove the front cover, disconnect and remove the old batteries, and replace them with new ones. Thanks to the use of an LCD display that optimizes the operation of the device, you can intuitively monitor the operation of the equipment. Clear markings will allow you to easily read information such as: voltage at the device's output, battery status or current operating mode. Full sine wave Each time the UPS enters battery backup mode, full sine wave alternating current is generated and used to maintain connected devices. This is a power source identical to that obtained from the mains, making it ideal for trouble-free operation of any device. The advantage of this solution is the ability to power even the most sensitive systems that need the most stable possible power source. Thanks to a wide range of applications, the VI CSW series uninterruptible power supplies can be used both at home and in the office. At home, they will power the central heating furnace or enable the operation of the garage door, and in the office, they will power multifunctional devices and laser printers. Additional areas of application include: aquariums, monitoring and security systems and devices with electric motors. Made in Line-Interactive technology Thanks to the use of Line-Interactive technology supported by the AVR system, VI 1200 CSW is able to significantly improve the quality of the output voltage, thanks to which the connected device will operate without unnecessary interference. Using an autotransformer, AVR eliminates all voltage fluctuations in the range from 207 V to 243 V. Whenever this range is exceeded, the UPS will switch to battery power mode, maintaining continuity of power supply with the correct parameters. The short switching time of 6 ms ensures that even sensitive devices will not experience a sudden power outage. The risk of incorrect operation, turning off the device or even its permanent damage is completely eliminated. Large number of ports The UPS is equipped with 4 Schuko sockets. Each of them guarantees surge protection for the connected equipment, while protecting it against voltage spikes in the electrical network. Additionally, two sockets provide support for devices in the event of a power outage, allowing the equipment to operate uninterrupted. Additionally, the UPS has been enriched with two RJ-45 ports (input/output) protecting against overvoltages on the Ethernet line, which could arise, for example, as a result of damage to the power installation, and as a result of which the connected device would be irreversibly damaged. The USB-A ports (2.1 A) located on the front of the device can be successfully used to power and charge devices such as phones, power banks, or wireless headphones. In this way, we save ports on our computer, and we use a UPS charging station to replenish the batteries in our mobile equipment. Support for USB HID Extra control If there is a need for even more precise configuration of the UPS or its constant monitoring, the manufacturer has provided dedicated software for the device called ViewPower. The software is available for every popular operating system in multiple languages and provides: Possibility to monitor multiple devices at once Power analysis charts, UPS data histories and its graph (voltage, frequency, load, battery charge) User notification via e-mail, SMS, sound Password access protection Remote access Possibility to set a turn-on and turn-off schedule, perform battery tests and check sockets
Active power: 1500 No. of batteries: 1 Voltage: 230 Charging time: 3 Software: PowerNet MIB v 4.2.8 Environment requirements: Working temperature: 0-40 ° C Relative humidity during operation: 0-95% (without condensation) Working height: 0-3000 m Ambient temperature during storage: (-20) - 50 ° C Relative humidity of the memory: 0-95% (without condensation) Storage height: 0-15000 m Accessories included: Software CD Communication cable Replacement power cord suitable for your country Documentation CD Installation Guide Network management card Brackets for mounting in the cabinet Elements for mounting in the cabinet Rails for supporting cabinets Temperature sensor USB cable Warranty Card Dimensions: 432 x 505 x 85 mm 2U Weight: 21 Other features: Output frequency (synchronization with the network): 50 / 60Hz +/- 3Hz Input frequency: 40 - 70 Hz (automatic sensitivity adjustment) Length of the power cord: 1.83 meters Noise level 1 meter from the surface of the device: 50.0 dBA Protection class: IP 20
VI 1500 CW line-interactive UPS 1500VA 3x230V schuko USB-B RS-232 LCD EPO The PowerWalker VI CW is an advanced Line-Interactive UPS series with pure sine wave output. Combined with the AVR function for voltage stabilisation, this UPS series provides clean and stable power to connected equipment. This UPS is designed for home and office use, but also protects more sensitive IT and networking equipment, as well as high-end computer systems. The programmable segment and versatile LCD display present a high degree of functionality and flexibility rarely found in other line-interactive solutions. In addition, the series offers multiple communication options, such as USB communication with or without software (HID) and even communication via an optional network card (SMNP)
Product kirjeldus: PowerWalker VFI 2000 TG - UPS - 1800 vatti - 2000 VA seadme tüüp: UPS - external kaal: 17.2 kg väljundpinge: AC 220/230/240 V Power maht: 1800 vatti / 2000 VA Sisendühendused: 1 x power IEC 60320 C14 Output Ühendusi: 4 x power IEC 60320 C13 aku: - 9 Ah Batteries kogus: 4 kestvus (Up To): 4.5 min võrguseadeing: RS-232, USB mõõtmed (WxDxH): 19 cm x 39.9 cm x 32.8 cm
Sealed, maintenance free, lead-acid battery, VRLA type, with 5 years designed life (according to Eurobat: 6-9 years - General Purpose). Universal battery for standby and cycle use.
PowerWalker VFI 1000RM LCD With true double-conversion online UPS design, PowerWalker VFI 1000RM LCD provides powerful and overall protection to your sensitive devices. It can accept wide input voltage for harsh environment. It offers full protection for critical devices such as sensitive servers, network/telephone communication systems as well as for industrial applications. With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19 rack systems or used as tower. True double-conversion Pure sine wave output Hot-swappable battery design Monitoring software included Output power factor 0.8 Wide input voltage range (110-300 VAC) Input power factor correction 0.99 50/60 Hz frequency converter mode ECO mode operation for energy saving Programmable power management outlet Emergency power off (EPO) function Intelligent fan control for reduced noise level Smart battery charger to extend battery life Optional: SNMP module, dry contact AS/400 card, M BS, ATS, Battery Pack, Rack installation kit, RBS Type Online-USV (UPS) Nominal Power (Watt) 800 Nominal Power (VA) 1.000 Number of Batteries 3 Max. Backup Time (100W Load / Min.) 60 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 8x Colour Black Width (mm) 438 Height (mm) 88 Depth (mm) 480 Weight (kg) 18,4
Voltage: 12 Battery capacity: 17 Dimensions: 181 x 76.2 x 167 mm Other features: - Maximum Discharge Current 230A(5sec)- Internal Resistance Approx. 16 mΩ Weight: 5.5
No. of batteries: 1 Voltage: 12 Battery capacity: 5.1 Environment requirements: - Permissible temperature range for discharge: -15 ~ 50 ° C- The permissible temperature range for charging: -15 ~ 40 degrees C- Permissible temperature range for storage: -15 ~ 40 degrees C- The recommended range average temperature: 25 ° C Dimensions: 102 x 92.8 x 69.9 mm Weight: 1.66 Other features: Battery life: 3-5 years
Original part number 10120507 Product name RACK MOUNT KIT 19" FOR UPS POWER WALKER VFI 1000/1500/2000/3000RM 6000/10000R Producer Power Walker Class of product Accessories for UPS UPS's options type other accessories Additional information RACK MOUNT KIT 19" FOR UPS POWER WALKER VFI 1000/1500/2000/3000RM LCDVFI 6000/10000R LCDExtendable from 460mm up to 740mm Height no data Width no data Depth no data Net weight no data
