The CATX Displayport Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView CATx KVM switches and/or Adder extender receivers (either AdderLink X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers arethen all linked to the remote device. Product Codes CATX-DP-USBA; CATX-MDP-USBA Resolutions and cable lengths The maximum resolutions achievable are: 1920 x 1200 x 60Hz at 200m 1280 x 1024 x 60Hz at 300m. Power The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector Mini DisplayPort version available Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. A version of the CAM is available with Mini DisplayPort connectors. EDID display information The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. USB The CAM supports low speed (1Mb/s) HID USB devices only. Audio 2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.
‘Zero U’ Computer Access Modules (CAMs):Powered by USB, the digital computer access modules sit in-line and are ideal for racks with limited available space. Modules are available in DVI, VGA and DisplayPort options. Product CodesDDX-CAM-DP; DDX-CAM-DVI; DDX-CAM-VGAZero UA zero U configuration CAM (Computer Access Module) which attaches to your source device/computer and acts as a tranmitter to either the DDX30/DDX10 switch or directly to the DDX USR user station as a point to point extender. DDX CAM requires no specific configuration which means you can simply connect it to a DDX USR or DDX switch. DisplayPort, VGA or DVIAvailable in DisplayPort, VGA and DVI variants, the DDX CAM supports all common single link digital video resolutions. HDMI is also possible via a passive converter.Mult Function USBBecause the DDX CAM is powered by USB, you do not need an external power supply, thus simplifying cable clutter significantly. The same USB power connector also delivers USB data functionality and acts as a USB audio device.
Original part number ANTART AT-451W Product name ART AERIAL INDOOR DUAL LTE 1800MHz 14dBi 2x CRC9/TS9 Producer ART Class of product Antenna Wave propagation type Directional Frequency does not concern Power gain 28 dBi Usage indoor Impedance 50 Ohm Polarization dual linear Radiation angle in horizontal plane 30 degrees Radiation angle in vertical plane 25 degrees Additional information Frequency: 800-2600MHzPower gain: 2x 12/14 dBiHelps improve quality signal of 4G(LTE)Universal plugs compatible with modems HUAWEI and ZTEAdmission to trading in PolandCountry of origin: EU Length 6 mm Width 15 mm Height 25 mm Net weight 0.4 kg
PC Connector: DVI-D (Dual Link), USB and AudioConsole Connector: DVI-D (Dual Link), USB and AudioLength:3mKaabli pikkus3 mToote värvMustKlaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-DPistmik 1DVI-D DL (M), USB A (M), 2 x 3.5mmPistmik 2DVI-D DL (M), USB B (M), 2 x 3.5mmPistmik(ud)DVI-D DL, USB, 3.5mm Jack
- PC Connector:DVI-D (Dual Link), USB and Audio.- Console Connector: DVI-D (Dual Link), USB and Audio.- Length: 5m.Kaabli pikkus5 mToote värvMustPistmik 12x RCA, USB A, DVI-DPistmik 22x RCA, USB B, DVI-DSuguMale/MalePistmik(ud)USB A, DVI-D, USB B, RCA
Original part number CS82U-AT Product name ATEN CS82U 2-Port PS/2-USB KVM Switch, 2x Custom KVM Cable sets, Non-powered Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports PS/2, PS/2, D-Sub-15USB, USB, DSub-15 Local console's ports 1x (USB, USB, HDB-15 VGA female) Number of remote users (IP) 0 Type of computer case Desktop Maximal resolution 1920 x 1440 pixels Active port selection pushbuttonkeyboard hotkeys Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.2m for PC with PS/2, PS/2, D-Sub-15 conectors - 2pcs Width 140 mm Height 55 mm Depth 87 mm Net weight 420 g
Original part number 336741 Product name Intellinet Network Cable RJ45, Cat6 UTP, 20m grey, 100% copper Producer Intellinet Network Solutions Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 20 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Boot non-snag-proof Colour Grey Additional information Snagless coverStrain ReliefGold Plated ContactsPacked in color Intellinet bag with sticker, description and barcode100% copper fibres
Original part number DN-10130 Product name DIGITUS Gigabit Ethernet PCI Express network card Producer DIGITUS Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector 1 x RJ45 (network card) Type of bus connector PCI-E 8x Wake On Lan function Yes Operating system Mac OS 10.XWindows 7Windows 8Microsoft Windows VistaMicrosoft Windows XP Chipset Realtek RTL8168E Additional information Compliant with 10/100/1.000 IEEE 802.3 specificationSupports 10/100/1.000 Mbps auto negotiationSupports Auto MDI/MDIX crossover at all speedCompliant with PCI Express base specification 1.1Single-lane (or X1) PCI Express throughput supports rates of 2.5GbpsAdditional Low Profile Bracket to use the Card also in Thin Computers
Extend a highly secure, intelligent, managed Cisco Catalyst infrastructure with a single Ethernet cable or fiber from the wiring closetSupport for advanced security and services, including voice, video, and Cisco Borderless Network services, to remote endpointsPower over Ethernet (PoE) pass-through enables the compact switch to draw power from the wiring closet and pass it to end devices (selected models)
- Manufactured acc. Link Performance Class E, for up to 250MHz, EN 50173 and ISO/IEC 11801- Shielded RJ45 jacks- Cable installation via LSA strips, color codes based on EIA/TIA 568 A & B- Fixing option for cable ties, central ground conn
- Manufactured acc. Link Performance Class E, for up to 250MHz, EN 50173 and ISO/IEC 11801- Shielded RJ45 jacks- Cable installation via LSA strips, color codes based on EIA/TIA 568 A & B- Fixing option for cable ties, central ground connection- Suitable for 483mm (19") Rack Mount- Material housing: SECC, 1,5mm Electrogalvanized, Cold-rolled Steel accc. EN1.4301, UNS S30400, AISI 304 and LMSAD110Portide hulk24Pistmik(ud)RJ-45Toote värvMustMaterjalGalvaniseeritud teras, SECCPüstikmontaažJahPüstiku mahutavus1U
Cost-effective PoE+ Managed Switch for Small and Medium NetworkingCentralized Power Management for Security and Public Service PoE ApplicationsIntelligent LED Indicator for Real-time PoE UsageRobust Layer 2 FeaturesRemote and Centralized Management
The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.Andmeedastuskiirus (maksimaalne)100 Mbit/sKonverteri sisendi liides100BASE-FX,100Base-TX,10Base-TKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3uEthernet-liidese tüüpFast EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sDupleks-süsteemTäisversioon, HalfFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus2000 mLainepikkus1310 nmKiustruktuurMulti-mode, Single-modeToetatud kiudkaabli läbimõõt9/125, 50/125, 62.5/125Tx-võimsus (minimaalne)-23,5 dBmWTx-võimsus (maksimaalne)-14 dBmWTundlikkus-31,8 dBmWSisemineEiToote värvMustSisendpinge5Sisendvool2Laius97 mmSügavus69 mmKõrgus26 mmKaal200 g
ZyXEL One Network experienceIntelligent and high-powered Power over Ethernet (PoE)High level network and access securityFuture-proof connectivity for evolving networks
Elite Model Management on kõige edukam ja tuntum modelliagentuur maailmas, mis on tegutsenud üle 43 aasta. Elite Model Management on 35 agentuurist koosnev rahvusvaheline võrgustik, kus tegutseb üle 2000 modelli! Lisaks modellindusele arendatakse ka Elite kaubamärgiga tooteid, mille eksklusiivne valik on saadaval ka Hansapostis. Elite toodetes on kombineeritud kvaliteet, väljapeetud disain ja taskukohane hind. Loe kindlasti kosmeetika- ja parfümeeriatoodete tellimistingimusi.
The VS92A Video splitter duplicates and boosts the video signal from one input to 2 outputs.It provides greater bandwidth and video resolution as well as extends the transmission distance up to 210' making it excellent for public broadcasting.In addition,units can be cascaded to accommodate as many monitors as the installation requires. • One video input to 2 video outputs. • Cascadable to 3 levels -provides up to 8 and thousands of video Signals. • Supports up to 350 MHz bandwidth. • Long distance transmission - up to 65m (210'). • High video resolution - 1920 x 1440. • DDC, DDC2, DDC2B Compatible (Port 1 only). • All metal casing. • Supports VGA, XGA, SVGA, UXGA and multisync monitors. • OS Support: Windows 2000, Windows XP, Linux, Mac and SunVideoportide arv2Videopordi tüüpVGAPistmik(ud)HDB-15Ethernet LANEiMaksimaalne resolutsioon1920 x 1440 pikslitHDCPEi3D-ühilduvusEiRibalaius350 MHzToote värvHõbeVõimsustarve (tüüpiline)0,85 WToide USB kauduEiKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 85 protsentiToite LED-indikaatorJahMaksimaalne kasutuskaugus65 mKäeshoitav kaugjuhtimispultEiMõõdud (l x s x k)130 x 75 x 45 mmKaal420 gJuhendJah
