Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
Product kirjeldus: Club3D - dokkimisjaam - USB-C 3.2 Gen 1 / Thunderbolt 3 - HDMI - GigE Product Type: dokkimisjaam Docking liides: USB-C 3.2 Gen 1 / Thunderbolt 3 Video liidesed: HDMI mõõtmed (WxDxH): 11.5 cm x 5.9 cm x 1.42 cm kaal: 116 g võrguseadeing: Gigabit Ethernet
RUT140 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil tagab see sujuva ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstusprotokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga tõhusaks kaug- ja kohapealseks haldamiseks.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4 TOITEPINGE1 x 3-poolne tööstuslikuks kasutamiseks kohandatud toitepistikupesaLIHTNE PAIGALDAMINELihtne paigaldus integreeritud DIN-riba klambrigaRMSKaugjuhtimine, juurdepääs ja VPN-teenused
MikroTik Antenna RouterBOARD Groove 52HPn - Radio access point - 100Mb LAN - 802.11a/b/g/n - Dual Band CPU Qualcomm Atheros AR9342 Internal Clock Rate 600 MHz RAM 64 MB Local Area Network Architecture 10Base-T/100Base-TX Uplink Port Type 1 x 10Base-T/100Base-TX Total Number of Ports 1 Data Link Protocol Supports Fast Ethernet/Ethernet IEEE 802.11a/b/g/n/ac Device Location External Wi-Fi Band Frequency 2.4 GHz/5 GHz Networking Features Power over Ethernet (PoE) Antenna External Radio Output Power 500 mW AC Adapter ExternalOutput: DC 24 V Power Device Installed Quantity 1 Power Device Maximum Quantity Supports 1 External Colour Gray Included Accessories Power Adapter PoE Injector Package Type Retail Depth (mm) 177 mm Height (mm) 44 mm Width (mm) 44 mm Nominal Weight 0.193 kg Maximum Operating Ambient Temperature 70 °C Minimum Operating Ambient Temperature -30 °C Warranty Products Returnable Yes Warranty Term (month) 23 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 0.19 kg Pack Weight Netto (kg) 0.01 kg Pieces in pack 1 Box Weight Brutto (kg) 0.19 kg Retail Packaging Net Weight Carton 0.01 kg Retail Packaging Net Weight Plastic 0.01 kg Packs in Box 1
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Original part number U3METALGLAN Product name i-tec USB 3.0 Metal Gigabit Ethernet Adapter 1x USB 3.0 to RJ-45 LED Producer iTec Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type 1x female USB 3.0 A-type Plug 2 type 1 x RJ45 Other information Other information Colour Space Gray Additional information 1x USB 3.0 connector, for connecting to a laptop, tablet or PC1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speedsSupports Wake-on-LAN, Jumbo frame up to 9k bytes, detection of cable crossoverSupport IEEE 802.3az (Energy Efficient Ethernet)IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loadingChipset Realtek RTL8153Powered through USB bus, no power adapter is neededOS: Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS, Linux, Android More info i-tec USB 3.0 adapter metal Gigabit Ethernet
- Patch Panel for Keystone Jacks.- Material housing: SPCC, 1.5mm Cold Rolled Carbon Steel acc. JIS G3141-1996.- Shielded.- Suitable for 483mm (19") Rack Mount.- 1U.- Color black RAL 9005.KaabeldustehnoloogiaCat 6Portide hulk24Pistmik(ud)KeystoneToote värvMustPüstikmontaažJahPüstiku mahutavus1ULaius483 mmSügavus1,5 mm
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5e, Shielded Lisaandmed: Set of 100 tk of shielded RJ-45 [8P8C] Cat.5E võrguseade plugs, intended mainly, for FTP LAN kaablid. värv: Metal
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: must-valge
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
D-Link DUB-E130. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB tüüp-C, Liides: Ethernet. Andmete edastamise maksimaalne määr: 1000 Mbit/s. Toote värv: Valge
Intel 1GB NET CARD PCIE I210T1BLK921434Toote kirjeldus inglise keeles:The new Intel® Ethernet Server Adapter I210 builds on Intel’s history of excellence in Ethernet products. Intel continues its market leadership with this newest generation PCIe* GbE network adapter. Based on the Intel® Ethernet Controller I210, this adapter represents the next step in the Gigabit Ethernet (GbE) networking evolution for the enterprise and data center, offering Audio Video Bridging (AVB) support, along with power management technologies such as Energy-Efficient Ethernet (EEE) and direct memory access (DMA) coalescing.
The TP-Link Omada SG3210X-M2 V1 is a versatile and powerful switch designed to meet the demands of modern networks. With its 8 2.5GBase-T ports and 2 10GBase-X SFP+ ports, it offers ample connectivity for devices requiring high-speed data transfer. Security is a priority, featuring robust protocols such as RADIUS, SSH, and TACACS+, along with 802.1x authentication and ACL support to protect against unauthorized access and attacks.Advanced network management capabilities allow for comprehensive control and monitoring, ensuring efficient traffic management and easy troubleshooting. The switch's fanless design ensures silent operation, making it an ideal choice for any office or data center. Additionally, its energy-efficient features not only reduce operational costs but also contribute to a greener environment. Whether for a small business or a large enterprise, the TP-Link Omada SG3210X-M2 V1 is engineered to provide reliable, secure, and high-performance networking solutions.
