See Delocki mikrofon on mõeldud mobiilseks kasutamiseks nutitelefonis või tahvelarvutis. Sellel on suurem leviala kui sisseehitatud mikrofonidel ja see sobib ideaalselt kõnesalvestuste, intervjuude, konverentside, loengute jms salvestamiseks. Mikrofoni saab nurga alla keerata kuni 90° ja seega saab seda keerata eelistatud nurga alla. Kaasasoleva Y-adapteri abil on kõrvaklappide kasutamine endiselt võimalik. Spetsifikatsioon - Liitmik: 1 x 3,5 mm 4-poolne stereopesa audioseadme pistikupesa, isane - Suunatavus: ühesuunaline - Võimalik kuni 90° nurk - Materjal: alumiiniumist korpus, kullatud vaskpistik, terasvõrk ja ABS-vooder - Impedants: 2,2 kOhm - Tundlikkus: -38 dB +/- 3 dB - Sagedusvahemik: 50 Hz - 16 kHz - Signaali mürasuhe (SNR): ca 56 dB - Kaal: umbes 6,5 g - Värv: schwarz Süsteeminõuded - Vaba stereopesa emakapesa, mis vastab CTIA-standardile Pakendi sisu - Mikrofon - Y-adapter - Tuulekaitse
This adapter by Delock enables the connection of up to two serial devices via a USB Type-A port. Specification • Connectors: 1 x USB 2.0 Type-B female > 2 x serial RS-422/485 DB9 male • Chipset: FT2232HL, SP3078EE • 2 x DIP switch: RS-422/485 operation setting • Internal pin header: jumper switch terminator on / off • Serial connector with nuts • Data transfer rate up to 1 Mbps • LED for indication of TxD / RxD activity • Automatical recognition and switching between RS-422 and RS-485 • ±15 kV ESD protection on all signal pins • Wall mounting integrated in the housing • Current consumption: operation: ≤ 141 mA / 705 mW standby: ca. 89 mA / 445 mW • Additional I/O and IRQ are not required • Operating temperature: 0 °C ~ 70 °C • Dimensions (LxWxH): ca. 107 x 65 x 23 mm System requirements • Linux Kernel 2.6 or above • Windows Server 2012/Server 2012 R2/Server 2016 • Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB 2.0 to 2 x serial RS-422/485 adapter • USB 2.0 cable • 4 x jumper • Driver CD • User manual
The KMU2P converter emulates the presence of a keyboard and mouse (via the PS/2 connectors) to the device at all times. This means that when used with a KVM switch, there will be no delay in response when switching to this channel.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
This Keystone cover by Delock can be used e.g. for mounting connectors. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box. Specification • For Keystone ports with 19.2 x 14.9 mm • For fibre couplers • Colour: white • Dimensions (LxWxH): ca. 19.0 x 16.5 x 21.9 mm Package content • 10 x Keystone cover
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.
ADDER® rackmount komplekt RMK15-SHRackmount komplekt ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjateleADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK15 on rackmount komplekt, mis on loodud kasutamiseks ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjatega. RMK15-SH mahutab kuni kaks seadet. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.
Need Delocki kõrvaklapid sobivad muusika kuulamiseks ja helistamiseks nutitelefonide ja tahvelarvutite puhul. Stereoheli 10 mm kõrvaklappide helidraiveritel on selged kõrged helid ja sügavad bassid ning seetõttu pakuvad head stereoheli. Kvaliteetne OFC-vaskkaabel Kõrvaklappide keeratud OFC (Oxygen Free Copper) kaabel on valmistatud hapnikuvabast vasest ja pakub seetõttu parimaid ülekandeomadusi ja vastupidavust. Ergonoomiline disain ja mugavad silikoonist kõrvaklapid Ergonoomiliselt nurgelised kõrvaklapid tagavad mugava kandmise. Pehmed kõrvaklapid on valmistatud keskkonnasõbralikust silikoonist ning sobivad ideaalselt kõrvakanalisse. Kaabli kaugjuhtimispult & kiire mute-funktsioon Kaabli küljes on juhtmega kaugjuhtimispult, millega saab soovi korral reguleerida kõrvaklappide helitugevust. Mitmefunktsionaalse nupu abil saab mikrofoni kiiresti vaigistada, samuti valida, peatada või jätkata järgmise loo mängimist. Spetsifikatsioon - Ühendus: 1 x 3,5 mm 4-poldiline stereopesa 90° nurga all (CTIA standard) - Tundlikkus: 100 dB +/- 3 dB - Sagedusvahemik: 20 Hz - 25 kHz - Helijuht Ø: 10 mm - Impedants: 32 Ohm @ 1 kHz - Kaabli kaugjuhtimine: valju / vaikne - Multifunktsionaalne nupp: mute / play / pause / forward - Sisseehitatud mikrofon - Kaabli pikkus: ca. 1,2 m - Kaal: ca. 15 g
See Delocki paigaldusklamber sobib 35 mm DIN-riba kinnitamiseks. Kasutatakse erinevate seadmete puhul Klambrit saab kruvida erinevate seadmete külge 3 paigaldusava abil. See võimaldab paigaldada seadmeid nt. juhtimiskapis DIN-redelile. Spetsifikatsioon Keskkonnatemperatuur: -40 °C ~ 85 °C DIN-riba kinnitamine: 35 mm 3 kinnitusauku Paigaldusavade läbimõõt: 6 mm Kruviaugu samm: ca. 15 mm Materjal: alumiinium koos vedruterastraadiga Mõõtmed (LxSxK): ca. 48,1 x 27,0 x 9,2 mm Süsteeminõuded 35 mm DIN-kandaal Pakendi sisu 1 x kinnitusklamber 3 x kruvi M3 x 5 mm
See Delocki paigaldusklamber sobib 35 mm DIN-riba kinnitamiseks. Kasutatakse erinevate seadmete puhul Klambrit saab kruvida erinevate seadmete külge 4 kinnitusaugu abil. See võimaldab paigaldada seadmeid nt. juhtimiskapis DIN-redelile. Spetsifikatsioon Keskkonnatemperatuur: -40 °C ~ 85 °C DIN-redeli kinnitamine: 35 mm 4 kinnitusauku Paigaldusavade läbimõõt: 6 mm Kruviaukude samm: ca. 20 mm Materjal: alumiinium koos vedruterastraadiga Mõõtmed (LxSxK): ca. 48,1 x 54,0 x 9,2 mm Süsteeminõuded 35 mm DIN-kandaal Pakendi sisu 1 x kinnitusklamber 4 x kruvi M3 x 5 mm
ADDER® SFP-SM-LC-10GÜhekiuline 10 Gbps SFP+ LC-pistikuga.Ühekiuline 10 Gbps SFP+ LC-pistikuga, vastab standardile IEEE 802.3ae. See transiiver kasutab 1310 nm DFB-laserit ja on mõeldud optiliste andmete edastamiseks ja vastuvõtmiseks ühekiulise optilise kiu kaudu ühenduse pikkusega 10 km.
ADDER rackmount products are designed to enable easy installation within the rack environment. X-RMK-CHASSIS - 19" 2U rackmount chassis kit for ADDERLink X Series and ADDERLink ipeps
See Delocki mikrofon sobib mobiilseks kasutamiseks nutitelefonis või tahvelarvutis ning seda saab kasutada kõne- ja häälte edastamiseks. Kummeeritud alus tagab libisemiskindla aluse ja mikrofoni saab liblikkaela abil keerata ideaalsesse suunda. Lisaks on mikrofonil 3,5 mm stereopesa emasport ja seega saab samal ajal kasutada kõrvaklappe. Spetsifikatsioon - Ühendused: 1 x 3,5 mm 4-poldiline audio stereopesa isaspea 1 x 3,5 mm 3-poldiline stereopesa (emane) - Suunatavus: kõikehõlmav - Impedants: 2,2 kOhm - Tundlikkus: -32 dB +/- 3 dB - Sagedusvahemik: 100 Hz - 13 kHz - Mõõtmed (LxSxK): ca. 55 x 64 x 143 mm - Kaal: ca. 88 g - Kaabli pikkus: ca 1,7 m Süsteeminõuded - Vaba stereopesa, mis vastab CTIA-standardile Pakendi sisu - Mikrofon
Alumiiniumkorpus toetab 3,5-tollist SATA HDD-d. Ühendamiseks USB 3.0 kaudu mis tahes arvuti või sülearvutiga. Spetsifikatsioon • Ühendus: väline: 1 x USB 3.0 Type-B emane 1 x DC pesa 1 x sisse/välja lüliti sisemine: 1 x SATA 3 Gb/s 22 kontaktiga isane • Sobib kõigile 3,5-tollistele SATA kõvaketastele kuni 6 Gb/s • Kiibistik: Asmedia • Andmeedastuskiirus kuni 3 Gb/s • LED indikaator toite ja juurdepääsu jaoks • Mõõdud (PxLxK): ca. 206 x 120 x 31 mm • Hot Plug, Plug & Play Toiteallika spetsifikatsioon • Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 0,8 A • Väljund: 12 V / 2 A • Maandus väljast, pluss seest • Mõõtmed: sees: ø ca. 2,5 mm väljaspool: ø ca. 5,5 mm pikkus: ca. 11 mm Nõuded süsteemile • Windows Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64/10/10-64, Mac OS 10.9, Linuxi kernel 3.17 • Tasuta A-tüüpi USB-pordiga arvuti või sülearvuti Pakendi sisu • 3,5-tolline väline korpus • USB 3.0 kaabel • Statiiv, kruvid • Väline toiteallikas • Kasutusjuhend
ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA - Universal rackmount plate for all single unit X Series extenders.
ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA-DUAL - Universal rackmount plate for all dual unit X Series extenders.
Delocki 4-suunaline USB-laadimisfunktsiooniga pikenduspesa sobib erinevate seadmete mugavaks ühendamiseks otse laual. Sisseehitatud ülepingekaitsefunktsioon hoiab seadmed turvaliselt äikesevihma ja elektrikatkestuste ajal. Spetsifikatsioon Pistikud: Sisend: 1 x pistik CEE 7/7 Väljund: CEE 7/3 3 x USB Type-A pistikupesa Nimivool: 16 A / 250 V~ Nimivõimsus: 4000 W Ülelainekaitse SPD tüüp 3: Uoc = 6 kV~, Up = 1,3 kV~ / 1700 J Pistikupesad 45° paigutusega, lastekindel lukk 2-pooluseline ohutuslüliti, ülekoormuskaitsega Võimalus paigaldada seinale LEDid oleku jälgimiseks USB-laadija: Sisend: AC 250 V / 50 Hz / 0,5 A Väljund: 5 V / 2,4 A pordi kohta, max. 3,4 A kokku Ülevoolukaitse, ülekuumenemiskaitse, lühisekaitse Värv: must Kaabli pikkus: ca 1,5 m Mõõtmed (LxSxK): ca. 36,1 x 5,6 x 4,2 cm Pakendi sisu Pikendus pistikupesa Kasutusjuhend
Seda Delocki Keystone LED-i saab paigaldada näiteks korpusesse või seadmesse, et näidata erinevaid tööseisundeid. Tänu oma standardiseeritud mõõtmetele saab seda kasutada hõlpsasti paigaldamiseks näiteks Keystone'i ühenduspaneelile, esiküljeplaadile või pinnapealsele karbile. Spetsifikatsioon - Liitmikud: sisemine: 2 x jootmisühendus - Tööpinge / -vool: 6 V DC / 30 mA - 19,2 x 14,9 mm suurustele keystone-portidele - LED värvus: roheline - Pikkus paneeli ees: ca. 1,5 mm - Korpuse värvus: must - Mõõtmed (LxSxK): ca. 27,3 x 16,3 x 22,3 mm Pakendi sisu - Keystone LED
ADDER® rackmount komplekt RMK12-SH19-tolline 1U rackmount komplekt ADDERLink® INFINITY 4000/3000ADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK12-SH on 19" 1U rackmount komplekt 2 x ADDERLink® INFINITY 4000/3000 seeria seadmetele ja ADDERLink INFINITY Manager ASP-001 seadmetele. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.
See Delocki adapter võimaldab ühendada jadaseadme USB A-tüüpi pordi kaudu. Spetsifikatsioon - Ühendused: Kaabel: 1 x USB 2.0 Type-A isane > 1 x jadaühendus RS-232 DB9 isane Adapter: 1 x jada RS-232 DB9 female > 1 x jada RS-232 DB25 pesa - Kiibistik: FTDI - Kruviga seeriaviisiline pesa - Andmeedastuskiirus: üle 1 Mbit/s - Kaabli pikkus: ca 1,8 m Süsteeminõuded - Windows Vista/Vista-64/7/7/7-64/8.1/8.1-64/10/10-64 - PC või sülearvuti, millel on vaba USB-port Pakendi sisu - USB 2.0 ja 1 x jadaadapter - Adapter DB9-lt DB25-le - Draiveri CD - Kasutusjuhend
Seda Delocki Keystone LED-i saab paigaldada näiteks korpusesse või seadmesse, et näidata erinevaid tööseisundeid. Tänu oma standardiseeritud mõõtmetele saab seda kasutada hõlpsasti paigaldamiseks näiteks Keystone'i ühenduspaneelile, esiküljeplaadile või pinnapealsele karbile. Spetsifikatsioon - Liitmikud: sisemine: 2 x jootmisühendus - Tööpinge / -vool: 6 V DC / 30 mA - 19,2 x 14,9 mm suurustele keystone-portidele - LED värvus: sinine - Pikkus paneeli ees: ca. 1,5 mm - Korpuse värvus: must - Mõõtmed (LxSxK): ca. 27,3 x 16,3 x 22,3 mm Pakendi sisu - Keystone LED
See Delocki korpus võimaldab paigaldada M.2 PCIe NVMe SSD-d 2280, 2260, 2242 ja 2230 formaadis, seda saab ühendada USB kaudu arvutiga või sülearvutiga. Vastupidav metallkorpus tagab mälu optimaalse temperatuuri. SSD paigaldamine ilma tööriistadeta Selle korpuse eripära on see, et M.2 SSD paigaldamiseks ei ole vaja tööriistu. Kaane saab väikese survega tahapoole lükata, SSD kinnitatakse kumminipli abil trükkplaadi külge ja seejärel kinnitatakse kaas tagasi, kuni see lukustub. Spetsifikatsioon Liitmikud: välised: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane sisemine: 1 x 67-poolne M.2 võtme M pesa Kiibistik: JMicron JMS583 Toetab M.2 mooduleid formaadis 2280, 2260, 2242 ja 2230 koos M-klahviga. või PCIe (NVMe) baasil võtmega B+M Komponentide maksimaalne kõrgus moodulis: 1,5 mm, toetatakse kahepoolselt kokkupandud moodulite rakendamist Toetab NVM Express (NVMe) Käivitatav Andmeedastuskiirus kuni 10 Gbps LED-indikaator toite ja juurdepääsu jaoks Metallist korpus Mõõtmed (LxSxK): ca. 122 x 36 x 12 mm Hot Plug, Plug & Play Süsteeminõuded Android 9.0 või uuem versioon Chrome OS 72.0 või uuem Linuxi tuum 4.6.4 või uuem versioon Mac OS 10.14.5 või uuem Windows 7/7-64/8.1/8.1-64/10/10-64/11 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Väline M.2 korpus Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 30 cm Kasutusjuhend
See Delocki USB-peakomplekt sobib helisignaalide taasesitamiseks ja salvestamiseks, mida saab kasutada kodus töötamiseks või väikeseks ärikasutuseks. See sobib ideaalselt Skype'i, videokonverentside või online-kursuste jaoks. Optimaalne salvestamine ja hea stereoheli Tänu paindlikule mikrofonivarrele võtab mikrofon hääle- ja vokaalsõnumeid valjult ja selgelt üles. Peakomplekt pakub kuni 16 Bit / 48 kHz proovivõtusagedust ja suudab seega salvestada ja taasesitada audiosignaale DVD-kvaliteediga. Mugav kanda Peakomplektil on pehmed kõrvaklapid ja see on märkimisväärselt kerge, sest kaalub vaid umbes 126 grammi. Peapaela saab reguleerida vastavalt soovitud peamõõdule. Seetõttu pakub peakomplekt meeldivat kandmismugavust ka pikemaajalisel kasutamisel. Kaablipult ja Quick-Mute-nupp Kaabel on varustatud kaabli kaugjuhtimispuldiga, millega saab vajadusel reguleerida peakomplekti helitugevust. Quick-Mute-nuppu saab kasutada mikrofoni koheseks vaigistamiseks. Mikrofoni vaigistamise korral süttib kaugjuhtimispuldil punane LED. Plug & Play Tänu USB Plug & Play funktsioonile on peakomplekt kohe kasutusvalmis ja draiveri paigaldamine ei ole vajalik. Peakomplekt töötab kõigi levinud operatsioonisüsteemidega, nagu Windows, Mac OS, Chrome OS ja Linux. Spetsifikatsioon - Liitmik: 1 x USB 2.0 Type-A isasühendus - Suunatavus: kõikehõlmav - Tundlikkus: Kõrvaklapid: 103 dB +/- 3 dB Mikrofon: -19 dB +/- 3 dB, @ 1KHz - Sagedusvahemik: Kõrvaklapid: 20 Hz - 20 kHz Mikrofon: 100 Hz - 10 kHz - Impedants: 32 +/- 5 Ohm - Proovivõtusagedus: 16 Bit / 48 kHz salvestamiseks ja taasesitamiseks - Kaablipult (valjult / vaikselt / vaigistamine) - 1 x LED-indikaator mikrofoni vaigistamise kohta - Kaabli pikkus: ca. 1,5 m - Kaal: ca. 126 g - USB-vahendi toiteallikas - Plug & Play Süsteeminõuded - Chrome OS - Linuxi kernel 5.4 või uuem - Mac OS 10.9 või uuem - Windows 8.1/8.1-64/10/10-64 - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Paketi sisu - USB-peakomplekt - Kasutusjuhend
