Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
The 1000Base-EX Industrial SFP Single-Mode LC Module, model TI-MGBS40, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS40 is compatible with duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 40 kilometers (24.8 miles). Fiber Applications Long distance fiber networking for industrial, manufacturing, and corporate / education campus applications. Fiber Mode / Distance Single-Mode transceiver spans distances up to 40 km (24.8 miles) and supports up to 1.25Gbps. Compatibility Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors. Hot-Pluggable SFP Hot-pluggable SFP transceiver compatible with a MSA compliant SFP slot Fiber Wavelength Compatible with single-mode 1310nm transmissions Fiber Distance Supports networking for distances up to 40km (24.8 miles) Fiber Interface LC-type duplex connector Operating Temperature Rated for an operating temperature range of -40°– 85 °C (-40° – 185 °F)
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Vert, Gris, Orange, Violet, Rouge, Blanc, Jaune.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
LogiLink's outdoor patch cords are specifically designed for use in unprotected, harsh environments, but not for underground applications. The cable sheath made of resistant polyurethane (PE) protects against weathering and UV radiation. The cables are still flexible and easy to lay.
8 x Fast Ethernet porti 1,6 Gbps kommutatsioonivõimsus Edasisaatmiskiirus: (64 baidi suuruste pakettide puhul). Kaitsekindla IP30-klassi metallist lüliti Sisaldab DIN-riba ja seinakinnituse klambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse toiteallika Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-M6024) Ventilaatorita disain tagab vaikse töö
CAT5e UTP Patch CableCat 5e Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet technology to 100 meters (328 feet) and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates and work any gigabit speed products. These cables deliver improved performance over standard Cat5 cables.Vention CAT5E UTP Patch Cable is the fully-approved system-standard CAT5E Unshielded Twisted Pair (UTP) cable. CAT5E is completely backward-compatible with current CAT5 equipment. Vention CAT5E cables are composed of 4 pairs 26 AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard. Used to connect your network card to any of the following: 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.
4 x Gigabit PoE+ ports 2 x Gigabit SFP slots 120W PoE power budget 12Gbps switching capacity Forwarding rate: 8.9Mpps (64-byte packet size) Supports jumbo frames up to 10KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately TRENDnet's Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series is well suited for IP surveillance, IoT, and automation networks for homes and businesses. These hardened industrial gigabit flat switches provide front access to ports and power interfaces for easier installation. The flat and compact size make them ideal for cabinet installations where space is limited. Each hardened industrial front access switch features gigabit PoE+ ports for connecting devices, such as wireless access points, IP cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Wall-Mounted Front Access Switch The wall mountable flat switch provides front access to ports and power interfaces for easier installation. It's flat and compact size make it ideal for cabinet installations where space is limited. PoE+ Power A 120W PoE power budget supplies PoE power from the hardened industrial front access switch to up to eight Power over Ethernet devices. Hardened Industrial Design Equipped with an IP30 rated metal enclosure, this front access switch is designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 4 x Gigabit PoE+ ports, and 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 120W power budget Hardware Design Wall mountable hardware design provides front access to ports and power interfaces for easier installation Compact The flat and compact size is ideal for cabinet installations where space is limited Mounting Hardware Includes DIN-Rail bracket and magnetic wall mount kit Switching Capacity 12Gbps switching capacity Redundant Power Dual power inputs provide redundant power with overload current protection, and an output alarm relay to indicate input power failure. (Power supply sold separately, models: TI-S12048, TI-S24048, and 48VDC3000) Alarm Relay Alarm relay output triggered by power failure of primary or secondary power inputs Jumbo Frames Sends larger packets, or jumbo frames (up to 10KB), for increased performance Wide Temperature Range Hardened industrial housing offers a wide operating temperature range of -40° – 75° C (-40° – 167° F), allowing for installations in extreme hot and cold environments Shock and Vibration Resistant Hardened design rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) for industrial settings Electro Magnetic Compliance Complies with industrial EMS certifications (IEC 61000-4-2) ESD: Contact: 6kV | Air: 8kV, (IEC 61000-4-4) EFT: Power: 2kV | Signal: 2kV, (61000-4-5) Surge: Power: 2kV | Signal: 2kV LED Indicators LED indicators convey power and port status Grounding Point Grounding point protects equipment from external electrical surges
A Micro SD memory card can be fitted into the Compact Flash adapter by Delock, which can be used in a Compact Flash slot of a device. The data transfer rate depends on the used memory card. Specification • Connectors: 1 x CF type I > 1 x Micro SD slot • Push to push Micro SD socket • Supports following memory cards: Micro SD, Micro SDHC, Micro SDXC • Supports memory: SDXC up to 2 TB (exFAT) SD 3.0 Class 2 / 4 / 6 / 10 and UHS-I Wireless SD and standard SDIO cards • Data transfer rate up to 25 MB/s • Dimensions (LxWxH): ca. 42.8 x 36.4 x 3.3 mm • Supports IDE UDMA and CF Fast DMA mode System requirements • A free CF slot Package content • CF adapter
This cable duct by Delock can be used to bundle and conceal exposed cables, to protect them from dirt or damage. Toolless assembly The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold. Plenty of space for different cables Depending on the diameter and thickness of the individual cables e.g. antenna cables, HDMI cables, audio cables or power cables can be accommodated. Thus the cables are safely and orderly stowed away. Reusable The upper part of the cable duct can be easily removed by sliding it out to add or remove cables. Specification • self-adhesive • Reusable • Individually shortenable • Environmental temperature: -40 °C ~ 65 °C • Material: PVC • Colour: black • Dimensions (LxWxH): ca. 1000 x 50 x 12 mm Package content • Cable duct
Description The antenna cable by Delock is suitable for connecting components of radio frequency technology. Specification • Connectors: 1 x SMA jack bulkhead > 1 x MHF® I plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: black • Length incl. connectors: ca. 20 cm System requirements • Device with one free SMA or MHF® I port Package content • Antenna cable Package • Zip poly bag
Seda Delocki soliidset tööstusvõimelist USB-keskust saab ühendada arvutiga USB Type-A-liidese kaudu. See laiendab arvutit nelja A-tüüpi USB-liitmikuga, mis toetab USB-akulaadimise spetsifikatsiooni BC1.2. Seega saab ühendatud seadmeid, näiteks nutitelefone, kiiremini laadida. Vajaduse korral saab toitepistikupessa ühendada lisatoiteploki või lisatoitekaabli. Spetsifikatsioon - Pistikud: 1 x USB 3.0 Type-B emane > 4 x USB 3.0 Type-A female - akulaadimise spetsifikatsioon BC1.2 1 x 9 - 40 V alalisvoolu pesa 1 x 3-pooluseline toitepistik - Kiibistik: VIA VL811+ - Andmeedastuskiirus kuni: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s - 5 x LED-indikaator - Kruviaukudega USB-pordid - Vastupidav metallist korpus - Eemaldatavad seinakinnitused - Toiteallikas: Bussitoitega või isetoitega - Paindlik toiteallikas 9 V kuni 40 V - Toitepistikute sisendpooluse automaatne tuvastamine - ESD-kaitse kuni 15 kV kõigi portide puhul - Mõõtmed (LxSxK): ca. 158 x 80 x 32 mm - Värv: must - Plug & Play Toitepistiku spetsifikatsioon - 9 - 40 V - Mõõdud: ø ca. 2,1 mm väliskülg: ø ca. 5,5 mm pikkus: ca. 9 mm Süsteeminõuded - Windows 7/7-64/8.1/8.1-64/10/10-64, ex Linux Kernel 3.16.x, ex Mac OS 10.9 - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB pesa - 1 x USB-A-istmiku ja USB-B-istmiku vaheline kaabel, pikkus ca 1 m - 2 x seinakinnitusklambrid - 1 x DIN-riba paigaldus: 35 mm - 1 x 3-poolne klemmiplokk - Kasutusjuhend
Publik – kolmeribaline (üks 2,4 GHz ja kaks 5 GHz) kodune pääsupunkt koos võrgutehnoloogiaga Tootekood: RBD25G-5HPacQD2HPnD Wi-Fi peab olema kiire, töökindel, lihtsalt hallatav, see peab jõudma igasse tuppa ja igasse nurka. Just seda suudavad Publiku seadmed suurejooneliselt pakkuda – isegi kõige suuremates majades! Publik on kolmeribaline (üks 2,4 GHz ja kaks 5 GHz) kodune pääsupunkt koos võrgutehnoloogiaga. Kui vajate WiFi-t suures hoones, kus on kõikvõimalikud takistused, lisage lihtsalt oma võrku rohkem Publiku seadmeid – ühe nupuvajutusega sünkroonitakse need sujuvalt ja luuakse ühtne WiFi-võrk, mis katab kogu ruumi. Esialgne seadistamine on samuti väga lihtne – laadige alla iOS või Android MikroTik rakendus, see loob ühenduse ruuteriga ja juhatab teid läbi kiire häälestusprotsessi. Mõnel juhul võib üks vaatajaskonnaüksus asendada mitut teist ruuterit – meie testides kattis see lihtsalt 1858 m² (20 000 ruutjalga). See sõltub takistuste, Wi-Fi klientide ja häirete hulgast, seega võivad tulemused erineda. Kaheahelaline 2,4 GHz ja 5 GHz traadita leviala lahendab rahvarohkes keskkonnas enamiku häiretega seotud probleemidest. Näiteks saate samaaegselt kasutada 2,4 GHz kanalit kõigi oma kodumajapidamises kasutatavate mobiilseadmete jaoks ja reserveerida 5 GHz kanali arvuti või teleri jaoks. Tellige oma publik juba täna ja hakake elama tulevikus. Lihtsa ja elegantse võrgustamise tulevik. Publik // RBD25G-5HPacQD2HPnD tüüpi traadita pääsupunkt, 2x10/100/1000M kaasas olevad tarvikud 24 V 1,5 A toiteadapter (valge), Etherneti kaabel, värvus valge
Väljapaistev 802.3bt PoE++ lahendus karastatud keskkondade jaoksIEEE 802.3bt Power over Ethernet Plus Plus tehnoloogiale vastav PLANET IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch pakub kaheksa 10/100/1000BASE-T 802.3bt PoE++ porti, millest iga port annab kuni 95 vatti ja kaks 100/1000/2500BASE-X SFP-liidest, mis on vastupidavas IP30 metallist korpuses, et töötada stabiilselt rasketes tööstuslikes nõudlikes keskkondades. See toetab rikkalikke PoE-töörežiime, sealhulgas 90-vatilisi 802.3bt Type-4 PoE++ porte, 95-vatilist PoH-režiimi (Power over HD-BASE-T) ja 4-poolset jõurežiimi, et lahendada mittestandardsete 4-poolsete PoE PD-de kokkusobimatus välitingimustes. Kuna IGS-6325 PoE++ Switch seeria suudab töötada laias temperatuurivahemikus -40 kuni 75 kraadi C, saab seda paigutada peaaegu kõikidesse keerulistesse keskkondadesse. IGS-6325 PoE++ lülitite seeria võimaldab ka kas DIN-riba või seinale paigaldamist, et kasutada efektiivselt kapi ruumi.802.3bt PoE++ - 90~95-vatine võimsus üle 4-paarilise UTP lahenduseKuna IGS-6325 PoE++ seeria võtab kasutusele IEEE 802.bt PoE++ standardi ja PoH tehnoloogia, on see võimeline pakkuma kuni 95 vati võimsust, kasutades kõiki nelja paari standardset Cat5e/6 Ethernet-kaablit, et edastada energiat ja täiskiirusega andmeid igale PoE-konformsele toitevõrguga kaugele seadmele (PD). See omab kolmekordset võimekust võrreldes tavalise 802.3at PoE+-ga ja on ideaalne lahendus, et rahuldada kasvavat nõudlust suurema energiatarbimisega võrgu PD-de järele.
