This solid USB hub by Delock with metal housing can be connected to a computer via the USB Type-A interface. It expands the computer by 10 USB Type-A ports. Connected devices such as smartphones can be charged or data can be transferred at 5 Gbps. Each port can be turned on or off individually by using the switches. Specification • Connectors: 1 x USB 3.0 Type-B female > 10 x USB 3.0 Type-A female 1 x 12 V DC jack • Data transfer rate up to: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • 10 x LED indicator • Robust metal housing • Self-powered (works only with power supply) • Dimensions (LxWxH): ca. 150 x 53 x 23 mm • Colour: grey • Plug & Play Power supply specification • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.3 A • Output: 12.0 V / 4.0 A • Ground outside, plus inside • Dimensions: inside: ø ca. 2.1 mm outside: ø ca. 5.5 mm length: ca. 10 mm System requirements • Chrome OS • Linux Kernel 5.8 or above • Mac OS 10.15.6 or above • Windows 8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • Hub USB 3.0 • 1 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1 m • Power supply • User manual
24 x Gigabit PoE+ porti 2 x SFP-pesa Toetab 100/1000Base-FX kiudoptilisi SFP-mooduleid 685W PoE võimsuse eelarve PoE alive check taaskäivitab reageerimata PoE toitega seadmed 52Gbps kommutatsioonivõimsus Karastatud IP30 klassifikatsiooniga metallkorpus Töötemperatuuri vahemik -40° - 70° C (-40° - 158° F) Toetab LACP, STP/RSTP, VLAN ja IGMP Snooping'i IEEE 802.1p QoS koos järjekorra ajastamise toetusega CLI (konsool / Telnet / SSH), veeb (HTTP / HTTPS), SNMP v1 / 2c / 3 juhtimine IGMP Snooping / MVR tugi 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS tugi Sageduspiirangu kontroll pordi kohta Toetab Ethernet Ring Protection Switching (ERPS) 19" rack-paigaldatav metallist korpus koos kaasasoleva paigalduskomplektiga Mitmed sisendid tagavad voolu ülekoormusvoolukaitsega Toiteplokk müüakse eraldi (mudel: TI-RSP100048) TRENDneti Industrial Gigabit L2 Managed PoE+ Rackmount Switch seeria pakub täiustatud 2. kihi hallatavaid funktsioone koos täiustatud liikluskontrolliga, et vastata tänapäeva VKE-võrkude arenevatele nõudmistele. Iga tööstuslik 2. kihi rackmount-kommutaator on varustatud IP30 klassifikatsiooniga metallkorpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki, töötades samal ajal laias temperatuurivahemikus -40° - 70° C (-40° - 158° F) tööstuskeskkondades. Meie tööstuslikel 2. kihi rackmount-kommutaatorite mudelitel on kiireks seadmeühenduseks vasest gigabit-portid, samuti SFP-pesad, mis toetavad 100/1000Base-FX SFP-mooduleid pikamaa kiudoptiliste võrgu rakenduste jaoks. Nendel tööstuslikel 2. kihi rackmount-kommutaatoritel on ventilaatorita disain, mis välistab töömüra ja vähendab energiatarbimist. Need tööstuslikud Gigabit L2 Managed PoE+ Rackmount Switchi seeria pakub intuitiivset veebipõhist haldusliidest. Iga TRENDneti tööstuslik 2. kihi rackmount-kommutaator toetab täiustatud liiklusjuhtimise kontrolli, tõrkeotsingut ja SNMP-seiret. Täiustatud hallatavate kommutaatorite funktsioonide hulka kuuluvad LACP portide rühmitamiseks ja lülitite vahelise ribalaiuse suurendamiseks, VLANid virtuaalsete LAN-rühmade segmenteerimiseks ja eraldamiseks, QoS liikluse prioriseerimiseks, portide ribalaiuse kontroll, SNMP-seire ja palju muud, mis teeb igast TRENDneti tööstuslikust 2. kihi rackmount-kommutaatorist võimsa lahenduse VKE-võrkudele. L2-haldus Pakub hõlpsasti kasutatavat veebihaldusliidest liikluse juhtimise kontrollimiseks, näiteks VLAN, QoS, juurdepääsu kontrollimine, linkide koondamine, tõrkeotsing, SNMP-seire ja portide kaupa MAC-piirangud. PoE toide 685 W PoE-võimsuse eelarve varustab kuni 24 Power over Ethernet seadet ja sisaldab täiustatud PoE-portide kontrolli, näiteks PoE-i lubamine / keelamine, võimsuse prioriteet, PD alive check ja võimsuse ajastamine. Tööstuslik disain Varustatud IP30 klassifikatsiooniga metallkorpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki, töötades samal ajal laias temperatuurivahemikus -40° - 70° C (-40° - 158° F) tööstuskeskkondades.
Original part number RD-5G31-AC Product name Ubiquiti RocketDish 5G31-AC 5GHz AirMax AC PtP Bridge Dish Antenna, 31 dBi Producer Ubiquiti Networks Class of product Antenna
TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirements. The included 2 and 2.5 mm jumper cables increase power pin device compatibility. PerformancePoE Compatible with PoE (802.3af ) network connectionsGigabit Ethernet Supports Gigabit network speedsAdjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-PoE device power requirementsJumper Cables The included 2 and 2.5 mm jumper cables increase power pin device compatibility with the non-PoE networked deviceNo Power Adapter The TPE-104GS is powered by the PoE connectionMounting Built-in mounting points increase installation flexibility
TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.PoE PowerA 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.Fault Tolerance Features dual redundant 12 – 56 VDC power inputs with output alarm relay.Industrial Hardened DesignEquipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slotsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 12 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)Alarm Relay Alarm relay triggered by power failure of primary and/or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Cambium Networks has deployed more than five million radios around the world achieving unparalleled degrees of scalability. Continuing the tradition of designing and manufacturing industry leading antenna solutions, the 4×4 ePMP 3000 Sector Antenna encompasses all the key diff erentiations of the Cambium Antenna line and adds 4X4 Multi User MIMO Capability. Designed to work in 5 GHz spectrum and 90 degree coverage, the antenna is an integral part of the ePMP 3000 Access Point and allows for Multi User MIMO Operation.• Frequency Re-use: Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has a minimum 30 dB front to back ratio over a wide rear facing aperture.• Channel Flexibility: Consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance.• Consistent Coverage: Excellent null fi ll capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector.• Designed for the Installer: Small, compact design, integrated ePMP radio mount and GPS antenna integration.• Predictable Performance: The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth.
Cat.6A U/FTP flat network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat 6A cable, for operating frequencies up to 500MHz, shielded with foil shielded with single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, White.
