Välised mäluseadmed

Class: UHS-I, Class 10 Read: 45MB/s Write: 10MB/s

USB tüüp A 3.2 Gen 1 (3.1 Gen 1) Must, Sinine

180 MB/sec Flash Memory Write Data Transfer Rate: 130 MB/sec Speed Class Rating: Class10 Video Speed Class V30 Application Performance Class A2 Maksimum Operating Ambient Temperature: 85 °C Minimum Operating Ambient Temperature1.02 mm kõrgus (mm): 10.92 mm sügavus (mm): 14.99 mm Bundle With: 1year RescuePRO Deluxe

Kingston IronKey Keypad 200 Encrypted USB Flash Drive Memory with 256-bit XTS-AES hardware encryption that meets FIPS 140-3 Level 3 requirements (certification pending). The Kingston IronKey Keypad 200 is an OS-agnostic, hardware-encrypted USB drive with an alphanumeric keypad for easy PIN access. The KP200 memory is equipped with XTS-AES encryption with a 256-bit key. It is also FIPS 140-3 Level 3 certified (pending), confirming military-grade security with additional solutions that increase data security. The memory circuits are covered with a layer of special epoxy resin, which makes it virtually impossible to remove the components without damaging them, thus protecting against attacks on semiconductor systems. The memory is designed to highlight any attempt at physical interference. It is also protected against Brute Force and BadUSB password attacks thanks to digitally signed firmware. The alphanumeric keyboard is covered with a polymer layer that protects the keys and prevents the sequence of pressing them from being guessed through fingerprint analysis. The KP200 comes with a built-in rechargeable battery that allows it to be unlocked for the first time without using software and then connected to any device that supports USB A mass storage devices. This gives the user maximum freedom to use the memory on multiple platforms with different operating systems. With the Multi-PIN option (Admin and User PINs), the memory allows you to set easy-to-remember, but hard-to-guess alphanumeric Admin and User PINs. The administrator can restore the user's PIN and provide access to the storage if the user forgets the PIN or the storage locks after the user reaches the maximum number of 10 login attempts. When administrator and user PINs are enabled, the KP200 locks the user PIN after 10 consecutive failed login attempts. If the administrator PIN is entered incorrectly 10 times, Brute Force Protection cryptographically wipes the memory, permanently deletes data and resets the device. The memory also offers two levels of read-only mode (write protection): a general mode that can be set by the administrator, and a session mode that can be set by the user. Read-only modes protect memory from malware on untrusted systems. Additionally, an administrator can upload content and set the overall read-only mode, which allows the user to access the data but not make changes. FIPS 140-3 Level 3 Certification (pending) KP200 memory now meets the new military-grade security specification, FIPS 140-3 Level 3, published by NIST. This is an extended version of the FIPS 140-2 specification, which further increases memory security and its resistance to physical tampering. The drive is equipped with 256-bit XTS-AES encryption and protected against Brute Force and BadUSB attacks with digitally signed firmware. The memory circuits are covered with a layer of special epoxy resin, which makes it virtually impossible to remove the components without damaging them, thus protecting against attacks on semiconductor systems. Independence from the operating system and device The KP200 is equipped with a rechargeable battery that allows it to be unlocked for the first time without using software and then connected to any device that supports USB A storage devices. This gives the user maximum flexibility in using the memory on multiple platforms with different operating systems. Multi-PIN option Users can select user or administrator/user mode. Administrator Mode allows you to restore the user's PIN and provide access to the storage if the user forgets the PIN or the storage locks after the user reaches the maximum number of 10 login attempts. General and session read-only mode options Both administrator and user can set the session to read-only mode to protect storage from malware on untrusted systems. The administrator can also set the general read-only mode, which will remain active until the memory is reset.

Kingston IronKey Keypad 200 is an OS-independent hardware-encrypted USB drive with an alphanumeric keypad for easy-to-use PIN access.KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.KP200 utilizes a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports a USB type A mass storage device. This gives users the most flexibility across different platform types and operating systems.The drive also provides two levels of read-only (or write-protect) modes - a global mode that can be set by Admin, and a session-only mode that can be set by User. Read-only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set global read-only mode, so that User can access the data but not make any changes.

Memory Card up to 100MB/s, UHS-I, Class 10, U3, V30

Adata UR350 64GB USB 3.2

Kingston IronKey Vault Privacy 50 series are premium USB drives that provide business-grade security with FIPS 197 certified AES 256-bit hardware-encryption in XTS mode, including safeguards against BadUSB with digitally-signed firmware and against Brute Force password attacks. VP50 series is also TAA compliant. Because it is encrypted storage under the user's physical control, VP50 series are superior to using the internet and Cloud services to safeguard data. Vault Privacy 50 supports multi-password Admin, User, and One-Time Recovery option with Complex or Passphrase modes. This enhances the ability to recover access to the data if one of the passwords is forgotten. Traditional Complex mode allows for password from 6-16 characters using 3 out of 4 character sets. New passphrase mode allows for a numeric PIN, sentence, list of words, or even lyrics from 10 to 64 characters long. Admin can enable a User and a One-Time Recovery password, or reset the User password to restore data access. To aid in password entry, the eye symbol can be enabled to reveal the typed-in password, reducing typos leading to failed login attempts. Brute Force attack protection locks out User or One-Time Recovery passwords upon 10 invalid passwords entered in a row, and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row. To protect against potential malware on untrusted systems, both Admin and User can set Read-Only mode to write-protect the drive; additionally, the built-in virtual keyboard shields passwords from keyloggers or screenloggers. FIPS 197 certified and TAA compliant, organizations can customize and configure VP50 series drives with a Product ID PID for integration with standard Endpoint Management software to meet corporate IT and cybersecurity requirement through Kingston's Customization Program. Small and Medium Businesses can use the Admin role to locally manage their drives, e.g. use Admin to configure or reset employee User or One-Time Recovery passwords, recover data access on locked drives, and comply with laws and regulations when forensics are required.