Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.Andmeedastuskiirus (maksimaalne)100 Mbit/sKonverteri sisendi liides100BASE-FX,100Base-TX,10Base-TKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3uEthernet-liidese tüüpFast EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sDupleks-süsteemTäisversioon, HalfFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus2000 mLainepikkus1310 nmKiustruktuurMulti-mode, Single-modeToetatud kiudkaabli läbimõõt9/125, 50/125, 62.5/125Tx-võimsus (minimaalne)-23,5 dBmWTx-võimsus (maksimaalne)-14 dBmWTundlikkus-31,8 dBmWSisemineEiToote värvMustSisendpinge5Sisendvool2Laius97 mmSügavus69 mmKõrgus26 mmKaal200 g
Original part number 560283 Product name Intellinet patch panel 19" 48 ports UTP kat.6 2U Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 48 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Compatible with both 110 and Krone punch-down toolsSupports 22 to 26 AWG stranded and solid wireFor use with unshielded twisted pair (UTP) Cat6 network cableCat6 compliant to ANSI/TIA/EIA 568 B.2-1Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applicationsFinishing network by RJ-45 portsMeets 19" rackmount standards Height 2 U Width 19 inches Net weight 1.27 kg Colour Black
TRENDnet’s Corner Mount Bracket, model TV-HN400, installs a TRENDnet SpeedDome series network camera 30 cm (12 in.) off of an outside corner surface. This rugged powder-coated aluminum mount features a suspension point from which to hang the camera during installation and mounting hardware.- InstallationInstalls on outdoor ceiling or horizontal surface- CompatibilityCompatible with TRENDnet SpeedDome series network cameras- ConstructionRugged powder-coated aluminum construction- Seal RingSeal ring maintains waterproof seal against flat surface- Suspension PointOffers a suspension point from which to hang the camera during installation- Mounting HardwareMounting hardware includedToote värvValgeÜhilduvad tootedTV-IP450P, TV-IP450PI, TV-IP430P, TV-IP430PIKaal2,2 kgLaius419,5 mmSügavus194 mmKõrgus176,8 mm
Interchangeable Isolation™ Antennas for PrismStation™ With a range of different beam widths, the isolation antennas are interchangeable and feature high-performance beam patterns ideal for a range of deployment needs. Used with the PrismStation AC and IsoStation radios, these antennas deliver superb co‐location performance without sacrificing gain. Modular Design The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation AC or IsoStation radio, the system gets maximum gain out of the smallest footprint. Asymmetrical horn antennas 60° version have naturally attenuated side lobes and extremely low back radiation. They offer the best front-to-back ratio in the industry and the lowest side lobe radiation. Asymmetrical horn antennas are ideal for cluster sector installations with high co-location requirements. Features: Compatible Radios IsoStation/PrismStationHPOL Beamwidth 60°VPOL Beamwidth 60°Elevation Beamwidth 30°Electrical Downtilt 0°Cross-Pol Isolation 17 dBMax. VSWR 2:1Wind Loading (with PrismStation) 56 N @ 200 km/h (12.59 lbf @ 125 mph)Wind Survivability 200 km/h(125 mph)
