Aruba 570 Series Outdoor Access Points High-performance Wi-Fi 6 (802.11ax) for outdoor and hazardous location environments. Weatherproof and temperature-hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The 570 high-performance and high power series deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services. Purpose-built to survive in the harshest outdoor environments, 570 Series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum aggregate on-air data rate of 3 Gbps (HE80/HE40) they deliver the speed and reliability needed for any environment. Incredible Efficiency The 570 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink, Multi-User MIMO (MU MIMO) and cellular co-location. With up to 4 spatial stream and 160 MHz channel capability the 570 Series provides groundbreaking wireless capabilities for any application. Advantages of OFDMA This capability allows Aruba Wi-Fi 6 APs to handle multiple Wi-Fi 6 enabled client simultaneously on a single radio. Channel utilization is optimized by handling each transaction by matching allocated bandwidth in a channel to the offered user load. These sub divisions of the channel are referred to as Resource Units (RU). Aruba AirSliceTM for Extended OFDMA Assurance Initially, APs in controller-less mode (Instant) can provide SLA- grade performance by allocating RUs to specific traffic types. By combining Aruba's Policy Enforcement Firewall (PEF) and Layer 7 deep packet inspection (DPI) to identify user roles and applications, the APs will dynamically allocate the bandwidth needed. Non-Wi-Fi 6 clients can also benefit. Multi-User MIMO (MU-MIMO) The 570 Series APs support downlink MU-MIMO similar to Wi-Fi 5 (802.11ac Wave 2) APs. With the introduction OFDMA in Wi-Fi 6 the overhead for this capability is reduced and MU-MIMO effectiveness is substantially improved for large client counts. Wi-Fi 6 and MU-MIMO aware client optimization Aruba's patented AI-powered ClientMatch technology ensures that all clients are attached to their bestserving access point. Session metrics, network metrics, applications, client type, are used to identify and maintain best connection. Aruba Advanced Cellular Coexistence (ACC) This features uses built-in filtering to automatically minimize the impact of interference of high-power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment. Intelligent Power Monitoring (IPM) Aruba APs continuously monitor and report hardware energy consumption. APs can be configured to enable or disable capabilities based on the available PoE power - ideal when wired switches have exhausted their power budget. Green AP energy efficiency Aruba Wi-Fi 6 APs utilize AI-powered analytics to automatically transition in and out of a sleep mode. IoT Platform Capabilities Aruba Wi-Fi 6 APs include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors. This allow organizations to leverage the 570 Series as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources. Target Wake Time (TWT) Ideal for IoTs solutions that communicate infrequently, this Wi-Fi 6 capability allows IoT devices to use 802.11ax protocol. TWT coordinates with client devices to allow them to sleep for extended periods use shorter wake times to communicate before returning to sleep. This substantially extends the useful operating life of Wi-Fi 6 based battery powered sensors. Aruba Secure Infrastructure The Aruba 570 Series is an integral part of Aruba's 360 Secure Fabric to help protect user authentication and wireless traffic. WPA2-MPSK MPSK enables simpler passkey management for WPA2 devices - should the Wi-Fi password on one device change, no additional changes are needed for other devices. This feature is enabled when networks are deployed with ClearPass Policy Manager. VPN Tunnels In Remote AP (RAP) and IAP-VPN deployments, the Aruba 570 Series can be used to establish a secure SSL/IPSec VPN tunnel to a Mobility Controller that is configured as a VPN concentrator. Trusted Platform Module (TPM) For enhanced device assurance, all Aruba APs have an installed TPM for secure storage of credentials, keys and boot code. Simple and Secure Access To simplify policy enforcement, the Aruba 570 Series uses Aruba's policy enforcement firewall (PEF) features to encapsulate all traffic from the AP to the Mobility Controller (Gateway) for end-to-end encryption and inspection. Policies are applied based on context including: user role, device type, application, and location. This reduces the manual configuration of SSIDs, VLANs, and ACLs. PEF also serves as the underlying technology for Aruba Dynamic Segmentation. High-Density Connectivity Each 570 Series AP provide connectivity for a maximum of 512 associated clients per radio (1024 total). Flexible Operation and Management A unique feature of Aruba APs is the ability to operate in either controller less or controller-based mode. Controller-less (Instant) Mode In controller-less mode, one AP serves as a virtual controller for the entire network. Additional Wi-Fi Features Transmit Beamforming (TxBF) Increased signal reliability and range Passpoint Release 2 Seamless cellular-to-Wi-Fi carryover for guests Dynamic Frequency Selection (DFS) Optimized use of available RF spectrum Maximal Ratio Combining (MRC) Improved receiver performance for multi antenna access points Cyclic Delay/Shift Diversity (CDD/CSD) Enable use of multiple transmit antennas Space-Time Block Coding (STBC) Increased connection robustness Low-Density Parity Check (LDPC) High performance error detection and correction coding for enhanced receiver performance.
The LANCOM XS-5116QF is designed for network efficiency with its features. It supports 4,000 active VLANs and 1,024 tagged VLANs, optimizing data flow within operations. The device offers versatile interfaces including 12 1 Gigabit / 10 Gigabit SFP+ ports and additional 40 Gigabit QSFP+ uplink/stacking options, ensuring connectivity across various network demands. Its management protocols, such as SNMP and RMON, provide effective remote management capabilities for easy monitoring and control. Built with front to back airflow, this switch ensures cooling even in high-temperature environments, suitable for a wide range of installations. Operating within a temperature range from 0°C to 40°C and humidity levels of 10-90% non-condensing, the LANCOM XS-5116QF is engineered for durability. The inclusion of a rack mounting kit and its hot-swappable fans allow for easy integration into existing setups without downtime. Networking features like IGMP snooping and multicast storm control ensure that data is managed efficiently, providing a stable network experience. This switch prioritizes performance, scalability, and security, making it a solid choice for networking needs.
The 8-port Gigabit L2+ Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports are integrated that can be configured for specific requirements using various interfaces. The installation height is one rack unit.
The DIGITUS Fast Ethernet switch is designed to meet the demands of modern network environments, offering a blend of power, protection, and performance. With a PoE budget of 185 W, it can power multiple devices directly through network cables, simplifying installations and reducing clutter. The switch features 16 PoE ports for Fast Ethernet connectivity, along with Gigabit and SFP uplink options, providing flexibility for connecting a variety of devices. Robust electrical surge protection is ensured with 4 KV and 6 KV ESD protectors, safeguarding your network against unexpected electrical spikes. Advanced networking features like VLAN support, MAC address auto-learning, and PD-Alive function enhance network efficiency, security, and device management. Built to last, this switch boasts a MTBF of 50,000 hours and complies with numerous EU directives and standards, ensuring a reliable and compliant solution for your networking needs.
The DIGITUS DN-95342-1 switch is engineered to meet the demands of modern network environments, offering a blend of performance, reliability, and power efficiency. This rack-mountable switch comes with 16 PoE+ ports, each capable of delivering up to 30 W of power, making it ideal for powering VoIP phones, wireless access points, and other PoE-compatible devices without the need for additional power supplies. With a total PoE budget of 250 W, it can handle demanding PoE requirements.The switch also features 2 combo Gigabit SFP uplink ports, providing high-speed uplink capabilities and flexible connectivity options. Its robust design includes 2 built-in fans to ensure optimal operating temperatures and a high MTBF of over 50,000 hours, indicating its reliability and longevity. Advanced networking features like VLAN support, full and half duplex mode, and non-blocking traffic forwarding make it a versatile choice for any business looking to enhance its network infrastructure.
The DIGITUS DN-80223 switch is designed to meet the demands of modern networks, offering a blend of performance, security, and manageability. With 24 RJ-45 connectors for 1000Base-T and 4 SFP+ connectors for 10GBase-X, it provides a versatile platform for connecting a wide range of devices. The switch boasts a packet forwarding rate of 95.23 Mpps and a switching capacity of 128 Gbps, ensuring efficient handling of network traffic and minimizing bottlenecks. Advanced management features, accessible via SNMP, RMON, and SSH, allow for efficient monitoring and management of the network. Security is a priority, with features such as ACL support, port security, and DHCP snooping ensuring a secure networking environment. Additionally, the switch's ENERGY STAR and fanless design contribute to reduced power consumption and noise levels, making it an environmentally friendly choice for any organization.
Discover the DIGITUS industrial switch, designed to meet the rigorous demands of modern industrial environments. This switch offers a robust solution with a 1.6 Gbps bandwidth and a 1.2 Mpps packet forwarding rate, ensuring high-speed data transfer and efficient network traffic management. Encased in a durable aluminum housing and rated IP40, it is built to withstand harsh conditions while providing reliable connectivity.Versatility is at the core of this device, featuring four 10/100Base-TX RJ-45 ports and one 100Base-FX SFP uplink port, accommodating a wide range of network configurations. It also boasts advanced protection mechanisms, including 6 kV EFT and ESD protectors, safeguarding against electrical surges and ensuring the longevity of your network infrastructure. With a power consumption of just 3 W and support for power redundancy, this switch is not only powerful but also efficient, making it an ideal choice for industrial applications seeking reliable and sustainable network solutions.
The Edimax Pro GP-203IT is an efficient Power over Ethernet (PoE) injector designed for reliable network connectivity. It delivers up to 90 watts of power with PoE++ support, making it suitable for various high-demand applications. With an operating temperature range of 0°C to 40°C, this device is appropriate for a wide range of environments, ensuring performance in both cool and warm conditions.Featuring a wall-mountable design and robust metal housing, the GP-203IT is built to withstand different operating conditions. Its Plug-and-Play functionality ensures easy installation, while compliance with multiple standards, including IEEE protocols and environmental regulations, makes it a versatile choice for networking solutions. The fanless design allows for silent operation, enhancing its suitability for office and commercial environments.
PULSAR SF116 võrgukommutaator on hallatav Fast Ethernet (10/100) seade, mis võimaldab tõhusat võrgu haldamist ja voolu jaotamist üle Etherneti. See kompaktne 1U lüliti sobib ideaalselt ettevõtetele ja võrguadministraatoritele, kes soovivad optimeerida oma võrguinfrastruktuuri minimaalsete häiretega. Tänu Power over Ethernet (PoE) võimekusele võimaldab see edastada nii andmeid kui ka toitu ühe võrgukaabli kaudu PoE-ühilduvatele seadmetele, nagu IP-kaamerad, VoIP-telefonid ja traadita juurdepääsupunktid, lihtsustades oluliselt võrgu paigaldamist, vähendades vajadust täiendavate toiteallikate järele. PULSAR SF116 on elegantses mustas korpuses, mis sulandub sujuvalt olemasolevate IT-seadmetega. Tänu ruumikindlale 1U disainile sobib see ideaalselt riiulisse paigaldamiseks, mis säästab väärtuslikku ruumi võrgukappides. Tänu täiustatud haldusfunktsioonidele saavad kasutajad kontrollida võrguliiklust, suurendada turvalisust ja parandada jõudlust, pakkudes usaldusväärset ja skaleeritavat võrgukeskkonda. See kommutaator on suurepärane valik väikestele ja keskmise suurusega ettevõtetele, kes otsivad kuluefektiivset, kuid samas võimsat võrgu laiendamise ja haldamise lahendust.
JetStream 8-Port Gigabit L2 Managed Switch with 2 SFP Slots TP-LINK JetStream gigabit L2 managed switch TL-SG3210 provides 8 10/100/1000Mbps ports. The switch provides high performance, enterprise-level QoS, advanced security strategies and rich layer 2 management features. Moreover, the switch also comes equipped with 2 gigabit SFP slots, expanding your network flexibly. TL-SG3210 is the cost-effective network solution for the ideal small and medium business. TL-SG3210 has robust security and management features. The IP-MAC-Port-VID Binding and Access Control List(ACL) functions protect against broadcast storms, ARP and Denial-of-Service(DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Anymore, the easy-to-use web management interfaces, along with CLI, SNMP and RMON, mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive Layer 2 Switch and gigabit capability, TP-LINK JetStream L2 managed Switch TL-SG3210 provides you the ideal access-edge solution.
Vention IBEBQ 20m cat.6 network cable Black.In an era of increasing technological demands, a reliable network connection is becoming key to the smooth functioning of many devices. A key element of this connection is the right cable. Introducing the Vention model IBEBQ network cable, which combines functionality with reliability. Ideally suited to modern needs, it provides a stable and fast connection. Here are its main features.Comprehensive compatibilityThe Vention model IBEBQ network cable features a wide range of compatibility. You will seamlessly connect computers, laptops, TVs, routers, switches or ADSL devices with it. Such versatility makes it an indispensable piece of equipment in any household, office or public place.Category 6 UTP cableThe IBEBQ model is a category 6 UTP network cable, which means that it provides high bandwidth and connection stability. You don't have to worry about data interruptions or signal interference. Whether you're transferring large files, streaming 4K videos or playing online games, this cable will deliver transmission speeds of up to 1000 Mbps.Durability and reliabilityThe Vention model IBEBQ cable is made of PVC, which guarantees its longevity and resistance to everyday wear and tear. This material is flexible, and at the same time resistant to mechanical damage, which allows you to use the cable for many years without worrying about its quality. The length of the cable reaches 20 meters. ManufacturerVentionModelIBEBQTransmission speed1000 MbpsThroughput250 MHzLength20 mCompatibilityComputers, laptops, TVs, routers, switches, ADSL, etc.MaterialPVC
The Ubiquiti UniFi Network Cable is designed for reliable connectivity, suitable for indoor environments. It features a CAT 6 rating, ensuring efficient data transfer with up to 2.5 Gigabit Ethernet capacity. The cable is equipped with molded construction for durability, and translucent connector boots provide a modern look while aiding in installation. With PoE++ readiness, this network cable supports powering devices over the same cable used for data, simplifying setup and reducing clutter.
TL-SX3206HPP Jetstream L2+ managed switch, 6 10GE ports, including 4 PoE++ ports Lightning fast 10G connectivity: 2× 10-Gigabit SFP+ slots and 4× 10-Gigabit RJ45 ports provide high throughput and switching capabilities. PoE++ power supply with a total of 200 W: 4 10G ports, compliant with PoE++ 802.3af/at/bt standards and PoE power supply capability of up to 60 W on each port, are ideal for deploying Omada WiFi 6 Access Points and WiFi 6E Access Points. Reliable L2 and L2+ functions: Support for a complete line of L2 and L2+ features including Static routing, industrial-grade QoS and IGMP Snooping. Strong security strategies: LAN protection is provided by integrated features such as IP-MAC-Port Binding, ACLs, Port Security, and 802.1X authentication. Static Routing: Enables routing of network traffic for efficient use of network resources. Centralised management in the cloud: Integration with the Omada SDN platform enables easy and convenient access from the cloud and remote management. Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON and Dual Image provide extensive management capabilities. High-speed 10G connections 4 RJ45 10GE ports and 2 SFP+ 10GE slots with a combined switching capacity of 120Gbps 802.3bt PoE++ outputs Four RJ45 10GE ports offer 802.3bt PoE++ power up to 60W on each port for a total power of 200W Centralised management in the Cloud Integration with SDN solution ensures high network performance Reliable L3 and L2+ functionality Static Routing, DHCP Server, DHCP Relay, IP Inferfaces, IGMP Snooping, and more Lightning fast connections thanks to 10GE ports Build and expand your ultra-fast network with the TL-SX3206HPP fully-managed switch featuring RJ45 10GE ports, fibre ports and 120Gbps switching performance. Four RJ45 10GE ports with autonegotiation in 5 speeds (100Mbps, 1G, 2.5G, 5G and 10G) ensure optimal performance. Two 10GE SFP+ slots enable non-blocking switching performance and ultra-low latency, so you can easily create stable and ultra-fast connections to servers and switches. Meet the demands of WiFi 6 and WiFi 6E with 10G PoE++ ports The four RJ45 10GE ports offer PoE++ 802.3bt up to 60W on each port and a total power of 200W. They enable WiFi 6, WiFi 6E access points and PoE devices with high power consumption to reach their full potential. PoE (802.3af), PoE+ (802.3at) and PoE++ (802.3bt) standards are supported, so you do not need to install new electrical circuits to power your devices. Seamless integration with the Omada Cloud SDN platform Omada's software-defined network (SDN) infrastructure control platform integrates the operation of network devices, including access points, switches and network gateways, providing comprehensive central management from the cloud. Omada enables a highly scalable network - fully controlled through a single interface. This translates into seamless wired and wireless connections that are essential for hospitality, education, retail, offices and many other industries and establishments. Advanced Layer 3 features Enhanced L2+ and L3 features help build a highly scalable and well-secured network that is a reliable and efficient solution - ideal for offices, campuses and service providers alike. Effective security IP-MAC-Port binding, port protection, Storm Control and DHCP Snooping are features of the TL-SX3206HPP switch that protect your network from threats. The device also provides the ability to define the most common DoS attacks, so they can be detected and prevented early. Meanwhile, the ACL function (L2 to L4) is applicable for blocking access to specific network resources. Packet forwarding can be denied for specific source or destination MAC addresses, IP addresses, TCP/UDP ports or VLAN IDs. In addition, the switch uses 802.1X encryption to authenticate users seeking access to the network. L2+ layer functions With extensive Layer 2 (L2+) features including 802.1Q tag VLAN support, port mirroring, STP/RSTP/MSTP, port aggregation and 802.3x flow control functionality, the TL-SGX3206HPP switches boast versatile performance. The IGMP Snooping function allows multicast streams to be intelligently directed only to specific subscribers, while IGMP Throttling and IGMP Filtering functions effectively restrict unauthorised users from accessing multicast transmissions. The switch also supports static routing to segment the network and improve performance. Advanced QoS features In order to ensure better transmission of audio and video in a single network traffic, network administrators can specify priorities, e.g. for individual IP addresses, MAC addresses, TCP or UDP ports, etc. This ensures that audio and video transmission is smooth and lag-free. Features for service providers The TL-SX3206HPP is a great solution for ISPs due to the availability of the following features: DDM, sFlow, QinQ, L2PT, PPPoE ID Insertion and IGMP authentication. The 802.3ah OAM features and Device Link Detection Protocol (DLDP) enable easier supervision and management of the entire network. IPv6 support The switch supports many IPv6 features such as dual IPv4/IPv6 stack, MLD Snooping, IPv6 ACLs, DHCPv6 Snooping, IPv6 interface, PMTU Discovery and IPv6 Neighbor Discovery, making the network fully compliant with NGN (Next Generation Network) standards and no hardware replacement will be necessary.
FS1018PS1 16-Port 10/100M PoE+ Switch with 1 Combo SFP Port 200W PoE power, up to 30W per port 2 10/100/1000M uplink ports + 1 SFP port 16 10/100M PoE+ ports CCTV mode supports remote PoE power up to 250m VLAN mode isolates each PoE port for security IEEE 802.3at / IEEE 802.3af compliant Plug&Play
GS1028PS2 24-Port Gigabit PoE+ Switch with 2 Gigabit SFP Ports IEEE 802.3af/802.3at compliant 300W total PoE power budget, up to 30W per port 24 GbE PoE+ ports and 2 SFP ports CCTV mode supports remote power and data transfer up to 250 meters VLAN mode supports 24 isolated POE+ ports LED indicators for network diagnostics 19" metal case, internal power supply
8-Port Multi-Gigabit (2.5G) Ultra60 PoE++ Ethernet Plus switch Provides 8 1G/2.5G ports with 4 PoE+ ports and 4 Ultra60 PoE++ ports, making it the ideal switch for WiFi 6 AP connections, IP surveillance and more. Multi-Gigabit Ethernet devices Each of the 8 ports provides up to 2.5Gbps of dedicated, non-blocking bandwidth. PoE support The 4 Ultra60 PoE++ ports and 4 PoE+ ports provide a total of 230 watts of power, allowing you to power and connect devices over a single cable. Automatic PoE control Automatically balances PoE power based on the needs of the device regardless of the detected PoE class Non-blocking switching A 10 Gbps (10/100/1000 Mbps) backbone network provides connectivity to devices without restrictions. Fanless design Quiet operation makes this switch ideal for noise-sensitive environments. Versatile mounting options Install the switch on a desktop or mount it on a wall using the mounting hardware provided in the package
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
Kõrge jõudlusega 4MP turvakaamera öörežiimi ja ilmastikukindla disainigaSee kompaktne ja vastupidav turvakaamera on loodud pakkuma töökindlust ja kõrget jõudlust erinevates keskkondades. Täiustatud optika, tugev korpus ja mitmekülgsed funktsioonid tagavad kristallselge 4MP videokvaliteedi koos öörežiimiga, mistõttu sobib see ideaalselt nii sise- kui välistingimustes kasutamiseks.Mehaanilised omadused:Mõõtmed: Ø90 x 71,2 mm (Ø3.5 x 2.8") – kompaktne suurus lihtsaks paigaldamiseks.Kaal: 330 g (11.6 oz), kerge ja vastupidav.Korpuse materjal: Alumiiniumisulamist ja UV-kindel polükarbonaat, tagades pikaealisuse.Ilmastikukindlus: IP66 reitinguga, pakkudes kaitset tolmu ja vee eest.Löögikindlus: IK04 reitinguga, vastupidav füüsilistele löökidele.Kaabli mantli ümbrise mõõtmed: Ø20 x 70,6 mm (0.8 x 2.8").Kaabli mantli materjalid: Termoplastiline elastomeer, polükarbonaat ja silikoonkumm, pakkudes paremat vastupidavust.Kaabli pikkus: 30 cm (1 jalg).Kaabli läbimõõt: 5 mm (0.2").Kaabli mantli materjal: Polükarbonaat.Kaabli pistikutüüp: RJ45 võrguühenduseks.Optika ja pildikvaliteet:Sensor: 1/2.4" CMOS sensor kõrgekvaliteedilise pildi jäädvustamiseks.Objektiiv: Fikseeritud fookuskaugusega objektiiv.Vaatenurgad:Horisontaalne: 102.4°Vertikaalne: 54.9°Diagonaalne: 120.6° – lai vaateväli optimaalseks järelevalveks.Öörežiim: Sisseehitatud infrapuna LED valgustus ja IR lõikefilter, mis tagab selge nähtavuse ka vähese valgusega tingimustes.Video ja pildi seaded:Resolutsioon: 4MP (2688 x 1512) 16:9 kuvasuhtega, pakkudes teravat ja detailset videot.Maksimaalne kaadrisagedus: 30 kaadrit sekundis, sujuvaks liikumise jäädvustamiseks.Pildiseaded: Kohandatavad valikud, sealhulgas värv, heledus, teravus, kontrast, valge tasakaal, särituse kontroll, 2DNR, 3DNR, liikumise järgi müravähendus, maskeerimine ja teksti ülekate.Süsteem ja ühenduvus:Protsessor: Varustatud kahe-tuumalise Arm® Cortex®-A7 kiibiga efektiivseks töötlemiseks.Võrgu liides: 10/100 MbE RJ45 port usaldusväärseks traadiga ühenduseks.Maksimaalne energiatarve: 4W, tagades energiasäästliku töö.Toiteallikas: PoE (Power over Ethernet) kaudu.Toetatud pingevahemik: 37–57V DC, pakkudes mitmekülgseid toitevalikuid.LED indikaatorid: RGB/W LED, mis lihtsustab oleku jälgimist.Lähtestusnupp: Tehase lähtestamise valik kiireks tõrkeotsinguks.Paigaldamine: Pinnale kinnitatav, pakkudes lihtsat ja kindlat paigaldusvõimalust.Keskkonnaomadused:Töötemperatuur: -30 kuni 50º C (-22 kuni 122º F), sobilik ekstreemsetes temperatuurides töötamiseks.Tööniiskus: 0 kuni 90% mitte-kondenseeruv, sobilik erinevates keskkonnatingimustes.Sertifikaadid: FCC, IC, CE sertifitseeritud, tagades vastavuse rahvusvahelistele standarditele.Heli:Mikrofon: Sisseehitatud mikrofon helijälgimiseks (võimalik välja lülitada privaatsuse tagamiseks).
