ZyXEL One Network experienceIntelligent and high-powered Power over Ethernet (PoE)High level network and access securityFuture-proof connectivity for evolving networks
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 3 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Intel 1GB NET CARD PCIE I210T1BLK921434Toote kirjeldus inglise keeles:The new Intel® Ethernet Server Adapter I210 builds on Intel’s history of excellence in Ethernet products. Intel continues its market leadership with this newest generation PCIe* GbE network adapter. Based on the Intel® Ethernet Controller I210, this adapter represents the next step in the Gigabit Ethernet (GbE) networking evolution for the enterprise and data center, offering Audio Video Bridging (AVB) support, along with power management technologies such as Energy-Efficient Ethernet (EEE) and direct memory access (DMA) coalescing.
The TL-SG1048 is specially designed for Ethernet (10Mbps), Fast Ethernet (100Mbps) and Gigabit Ethernet (1000Mbps) with seamless link. Each port supports up to 2000Mbps throughput in full duplex mode. It is the perfect choice to improve the performance of Offices and workgroup networks. All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps Supports Auto-MDI/MDIX function Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode Store and forward Switching scheme
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
• Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
"18-Port Cloud Managed Desktop Switch with 16-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
MikroTik LHG LTE18 Kit LHGGM&EG18-EA No Wi-Fi, Pole and Mast Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 1, 1 Gbps (RJ-45) ports quantity 1, Mesh Support No, MU-MiMO Yes, 3G/4G data sharing
MS110P 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ - 10 Ports: 10× 10/100 Mbps RJ45 ports with 8 PoE+ ports - Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - 2× Uplink Ports: MS110P provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort - PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
Wi-Fi 7 has arrived with jaw-dropping performance - offering accelerated throughput, lower latency, stronger anti-jamming, and higher efficiency. Join the pros and experience the sheer performance of the next-generation of Wi-Fi.
