Võrguseadmed

The ADDERView Analogue Enhanced SecureSwitch (AVSC1102) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks" together with secure smartcard reader sharing. The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Common-Access-Card (CAC) reader and keyboard support Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSC1102 Features Tempest & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. SmartCard (CAC) reader support An optional smart card reader can be connected and used in conjunction with user authentication schemes. The smartcard system inside the switch is designed to introduce no greater risk than would be present if each computer had a separate card reader and the card was moved between them. Advanced tamper protection / reporting Anti-subversion monitoring - The enhanced models continually monitor their various defences for potential subversions (even when power is removed), such as: Dismantling of the case Tampering with the circuitry Loss or corruption of authentication security information. Authentication function AdderView Secure switches provide a trusted mechanism whereby you can confirm the units authenticity. Each AdderView Secure unit has a unique identity code configured within their circuitry. On request, Adder can provide you with an Authentication Certificate. AdderView Analogue Enhanced Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Enhanced Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry. One time programmable microprocessors Data isolation is assured by hardware and so is not compromised by any changes to the microprocessor software. Microprocessors use one time programmable memory so flash upgrades are not possible

See Delocki USB Type-A jadaadapter pakub kahte RS-232 DB9-liidest printerite, mõõteriistade, kontrollerite, asjade interneti seadmete jne jaoks.     Spetsifikatsioon - Ühendused:   1 x USB 2.0 Type-A isend >   2 x jadaühendus RS-232 DB9 isas - Kiibistik: FTDI FT232 - Andmeedastuskiirus kuni 921,6 Kbit/s - Toetab: UHCI / OHCI / EHCI - Kruviga seeriaviisiline pesa - Toetab kaugjuhitavat äratamist ja toitehaldust - Kaabli pikkus koos pistikutega: ca. 1,5 m     Süsteeminõuded - Windows 7/7-64/8.1/8.1-64/10/10-64/11, Linux ex Kernel 2.6.x, Mac ex OS 10.9. - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port     Pakendi sisu - USB 2.0 ja 2 x jadaadapter - Draiveri CD - Kasutusjuhend

Seda Delocki plaadihoidjat saab kasutada 72 mm laiuste trükkplaatide hoidmiseks, et paigaldada neid 15 mm või 35 mm DIN-ribale. Plaadihoidikut saab individuaalselt lühendada eri pikkustega. Pärast lühendamist saab kaks otsakorki uuesti peale panna.         Märkus Delock pakub soovi korral täiendavaid otsakuid. Artikli number: 66064.     Spetsifikatsioon Sobib 72 mm laiustele tahvlitele Keskkonnatemperatuur: -10 °C ~ 70 °C DIN-riba paigaldamine: 15 mm ja 35 mm 4 x paigaldusavad Paigaldusavade läbimõõt: 3,5 mm Kruviaugu samm: ca. 70 mm Materjal: plastik Värv: roheline   Süsteeminõuded 15 mm või 35 mm DIN-kandaal   Pakendi sisu 1 x tahvlihoidja 4 x kruvi 2 x otsakork

The ADDERView Analogue Standard SecureSwitch (AVSV1002) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks". The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSV1002 Features Tempest, EAL2+ & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. AdderView Analogue Standard Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Standard Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry. One time programmable microprocessors Data isolation is assured by hardware and so is not compromised by any changes to the microprocessor software. Microprocessors use one time programmable memory so flash upgrades are not possible AVSV1002 Package Contents (1) AVSV1002 KVM Switch (1) 5V, 2A Power supply and US-specific power lead (1) Information CD-ROM (4) Self-adhesive rubber feet (1) 2-Year Limited Warranty & Lifetime World Class Support AVSV1002-US Resources Adder AVSV1002 Datasheet (PDF) Adder AVSV1002 Manual (PDF) Adder AVSV1002-US Specifications Mechanical Physical 1U High Width 9.25 in. (235 mm.) Height 1.73 in. (44 mm.) Depth 5.9 in. (150 mm.) Construction Compact case, robust metal construction, extensive shielding Compatibility Hardware Compatibility Compatible with all known platforms featuring VGA video and USB HID or PS/2 connectivity Software Compatibility All known software and operating systems including Windows (all), DOS, Linux, Unix, BSD, Sun OS, Solaris, Mac OS, NetWare etc. Video Resolution Analog: 1920 x 1200 @60Hz Computer Connections at Switch 2 x USB HID (Keyboard/Mouse), HD-15 VGA, 2 x system link connection, smart card USB Local KVM Console Connection Video 3x USB type A, 1 x VGA HD-15 Keyboard/Mouse USB Power 100-240 VAC 47/63Hz Operating Temperature 0°C to 40°C / 32°F to 104°F Approvals CE, FCC, Designed to meet Common Criteria EAL4+ & EAL2+ certified (certificates available), Tempest certified AVSV1002 is also known as the AVSV1002-US and AVSV1002-USA.

The KMU2P converter emulates the presence of a keyboard and mouse (via the PS/2 connectors) to the device at all times. This means that when used with a KVM switch, there will be no delay in response when switching to this channel.

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

This USB memory stick by Delock can be used to save and transport data, e.g. photos, videos or music. The USB stick can be connected optionally via the USB Type-C™ or USB Type-A plug, the inner part is simply turned and then latch into place. Due to the stylish design with eyelet, the small USB memory stick can be easily attached to the key ring for transport. Small sturdy helper Due to its small dimensions and its sturdy housing, this Delock USB stick is particularly suitable for travelling. Due to its tiny size, the USB stick fits into any trouser pocket. Downwards compatible The USB 3.2 Gen 1 Type-A connector is compatible to its forerunners USB 3.0, USB 2.0 and USB 1.1. Thus the memory stick can be connected to a USB 2.0 or USB 1.1 port too. The data transfer rate complies with the respective specification.   Specification • Connectors:   1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male   1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male • Capacity: 16 GB • Maximum read speed: 117 MB/s • Maximum write speed: 43 MB/s • Maximum write cycles: 3000 • Operating temperature: 0 °C ~ 70 °C • Storage temperature: -25 °C ~ 85 °C • Power consumption: max. 5 W • Field of application: consumer • Plug & Play • Dimensions (LxWxH): ca. 36.8 x 12.1 x 7.1 mm   System requirements • Chrome OS 72.0 or above • Linux Kernel 3.3 or above • Mac OS 10.14.3 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port or • PC or laptop with a free USB Type-C™ port   Package content • USB 3.0 memory stick

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

The Adder redundant power supply (RED PSU) provides your installation with the power to grow on demand. Housed within a 1U 19-inch rack mount module, RED PSU delivers up to sixteen lockable power 12VDC outputs, hot-swappable power modules and remote management. 8 or 16 port independently controllable 12V outputs, 2 hot swappable power modules, Controllable via secure HTTP interface, REST API for 3rd party control integration, 500,000hrs MTBF ratings on power modules, 12V to 5V cable converters available for units with 5V power feeds. Product Codes PSU-RED2-8; PSU-RED2-16; PSU-RED1-8; PSU-RED1-16 Power to match your needs While individual Adder power adaptors perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. RED PSU provides a significant step up in terms of efficiency, reliability and power management 8 or 16 port power outputs with locking connectors RED PSU is available in two variants, offering either 8 or 16 separate, lockable power output ports. Each output is limited to a maximum of 20 Watts at 12V and each uses a locking connector to guard against accidental disconnection Hot swappable power modules Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 460W power modules, which slot into the rear of the RED PSU chassis. A single power module is rated at 500,000 hours MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation Protection Power integrity, safety and management are core elements of the RED PSU system. At start up RED PSU checks the validity of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device Web interface control RED PSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface 12V to 5V converter for 5V products Many existing Adder devices are powered from 5V supplies. An optional compact converter dongle allows 5V products to be used with the RED PSU, including the AdderLink Infinity range Power Distribution Whether configured with redundant power or a single power supply, the RED PSU is the perfect in rack power distribution solution, simplifying cable management and delivering remote flexibility to manage your devices.

This USB memory stick by Delock can be used to save and transport data, e.g. photos, videos or music. The USB stick can be connected optionally via the USB Type-C™ or USB Type-A plug, the inner part is simply turned and then latch into place. Due to the stylish design with eyelet, the small USB memory stick can be easily attached to the key ring for transport. Small sturdy helper Due to its small dimensions and its sturdy housing, this Delock USB stick is particularly suitable for travelling. Due to its tiny size, the USB stick fits into any trouser pocket. Downwards compatible The USB 3.2 Gen 1 Type-A connector is compatible to its forerunners USB 3.0, USB 2.0 and USB 1.1. Thus the memory stick can be connected to a USB 2.0 or USB 1.1 port too. The data transfer rate complies with the respective specification.   Specification • Connectors:   1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male   1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male • Capacity: 32 GB • Maximum read speed: 119 MB/s • Maximum write speed: 41 MB/s • Maximum write cycles: 3000 • Operating temperature: 0 °C ~ 70 °C • Storage temperature: -25 °C ~ 85 °C • Power consumption: max. 5 W • Field of application: consumer • Plug & Play • Dimensions (LxWxH): ca. 36.8 x 12.1 x 7.1 mm   System requirements • Chrome OS 72.0 or above • Linux Kernel 3.3 or above • Mac OS 10.14.3 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port or • PC or laptop with a free USB Type-C™ port   Package content • USB 3.0 memory stick

ADDER® rackmount komplekt RMK15-SHRackmount komplekt ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjateleADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK15 on rackmount komplekt, mis on loodud kasutamiseks ADDERLink® XD600 seeria ja ADDERLink INFINITY 11xx ja 21xx vastuvõtjatega. RMK15-SH mahutab kuni kaks seadet. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.

ADDER® SFP-SM-LC-10GÜhekiuline 10 Gbps SFP+ LC-pistikuga.Ühekiuline 10 Gbps SFP+ LC-pistikuga, vastab standardile IEEE 802.3ae. See transiiver kasutab 1310 nm DFB-laserit ja on mõeldud optiliste andmete edastamiseks ja vastuvõtmiseks ühekiulise optilise kiu kaudu ühenduse pikkusega 10 km.

Seda Delocki SAS-kaablit saab kasutada sisemiste SAS-seadmete ühendamiseks, nt Mini SAS HD-liidesega kontrolleri ja 4 SATA-pordiga kõvaketta ühendamiseks.     Spetsifikatsioon - Liitmikud:   1 x Mini SAS HD SFF-8643 isas: 1 x Mini SAS HD SFF-8643 mees   seade: 4 x 7-poldiline SATA-pesa allapoole nurga allapoole suunatud - Metallklambritega - Serial Attached SCSI (SAS) spetsifikatsioon - Andmeedastuskiirus kuni 6 Gb/s - Kaabli gabariit: 30 AWG - Pikkus koos pistikutega: ca 0,5 m     Süsteeminõuded - Vaba Mini SAS HD-liides     Pakendi sisu - Mini SAS HD kaabel

Seda Delocki moodulit saab kasutada keerdpaarikaabli ühendamiseks RJ45 pistikupesaga. Tänu oma standardiseeritud mõõtmetele saab seda kasutada lihtsaks sisselõikamiseks, nt Keystone-pastapaneelile, näoplaadile või pinnapealsele paigalduskarbile. RJ45 pordil on integreeritud turvamehhanism, millel on kaks funktsiooni: 1. Pistikupesa saab blokeerida ja kindlustada volitamata kasutamise eest. 2. Ühenduskaablit saab lukustada ja see on kaitstud eemaldamise eest. See võimaldab kontrollida füüsilist juurdepääsu võrgule turvakriitilistes kohtades, nt avalikes kohtades või andmekeskustes. Süsteemi saab kasutada tavaliste patškaablitega; lukustuse avamiseks on vaja eraldi saadaolevat tööriista.     Spetsifikatsioon Liitmikud: välised: 1 x RJ45 Secure (8P/8C) > sisemine: 1 x LSA plokk Cat.6 spetsifikatsioon Varjestatud (STP) TIA-568A/B viigupiiritus 19,2 x 14,9 mm suurustele Keystone-portidele Mõõtmed (LxSxK): ca. 38,5 x 22,3 x 17,3 mm   Süsteeminõuded Delock 86411 Keystone Tool RJ45 Secure   Pakendi sisu Keystone-moodul Kasutusjuhend

Seda Delocki USB-mikrofoni saab kasutada hääle- ja vokaaliedastuseks. Kummeeritud alus tagab libisemiskindla aluse ja liblikkael võimaldab mikrofoni painduda ideaalses suunas. LED-rõngas näitab sinise või punase tulega, et mikrofon on töövalmis, ning mikrofoni vaigistamiseks saab kasutada puutetundlikku vaigistamisnuppu.     Spetsifikatsioon - Liitmik: 1 x USB 2.0 Type-A pööratav isasühendus - Tundlikkus: -37 dB +/- 3 dB - Sagedusvahemik: 70 Hz - 15 kHz - Impedants: 2,2 kOhm +/- 30% 1 kHz juures - Proovivõtusagedus: 16 Bit / 48 kHz - Mute-nuppu puudutamine - Gooseneck - Status LED - Kummist alus - Värv: must - Kaabli pikkus: ca. 1,7 m - Mõõtmed (LxSxK): ca. 140 x 60 x 60 mm - USB-vahendi toiteallikas - Plug & Play     Süsteeminõuded - Linux 3.3 või uuem - Mac OS 10.9 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64 - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port     Pakendi sisu - USB-mikrofon - Kasutusjuhend

ADDER rackmount products are designed to enable easy installation within the rack environment. X-RMK-CHASSIS - 19" 2U rackmount chassis kit for ADDERLink X Series and ADDERLink ipeps

See Delocki mikrofon on mõeldud mobiilseks kasutamiseks nutitelefonis või tahvelarvutis. Sellel on suurem leviala kui sisseehitatud mikrofonidel ja see sobib ideaalselt kõnesalvestuste, intervjuude, konverentside, loengute jms salvestamiseks. Mikrofoni saab nurga alla keerata kuni 90° ja seega saab seda keerata eelistatud nurga alla. Kaasasoleva Y-adapteri abil on kõrvaklappide kasutamine endiselt võimalik.     Spetsifikatsioon - Liitmik: 1 x 3,5 mm 4-poolne stereopesa audioseadme pistikupesa, isane - Suunatavus: ühesuunaline - Võimalik kuni 90° nurk - Materjal: alumiiniumist korpus, kullatud vaskpistik, terasvõrk ja ABS-vooder - Impedants: 2,2 kOhm - Tundlikkus: -38 dB +/- 3 dB - Sagedusvahemik: 50 Hz - 16 kHz - Signaali mürasuhe (SNR): ca 56 dB - Kaal: umbes 6,5 g - Värv: schwarz     Süsteeminõuded - Vaba stereopesa emakapesa, mis vastab CTIA-standardile     Pakendi sisu - Mikrofon - Y-adapter - Tuulekaitse

This adapter by Delock enables the connection of up to two serial devices via a USB Type-A port.   Specification • Connectors:   1 x USB 2.0 Type-B female >   2 x serial RS-422/485 DB9 male • Chipset: FT2232HL, SP3078EE • 2 x DIP switch: RS-422/485 operation setting • Internal pin header: jumper switch terminator on / off • Serial connector with nuts • Data transfer rate up to 1 Mbps • LED for indication of TxD / RxD activity • Automatical recognition and switching between RS-422 and RS-485 • ±15 kV ESD protection on all signal pins • Wall mounting integrated in the housing • Current consumption:   operation: ≤ 141 mA / 705 mW   standby: ca. 89 mA / 445 mW • Additional I/O and IRQ are not required • Operating temperature: 0 °C ~ 70 °C • Dimensions (LxWxH): ca. 107 x 65 x 23 mm   System requirements • Linux Kernel 2.6 or above • Windows Server 2012/Server 2012 R2/Server 2016 • Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port   Package content • USB 2.0 to 2 x serial RS-422/485 adapter • USB 2.0 cable • 4 x jumper • Driver CD • User manual

ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA - Universal rackmount plate for all single unit X Series extenders.

ADDER® Rackmount Kits are designed to enable easy installation within the rack environment. X-RMK-FASCIA-DUAL - Universal rackmount plate for all dual unit X Series extenders.

This Keystone cover by Delock can be used e.g. for mounting connectors. With its standardised dimensions it can be used for easy snap-in mounting in e.g. a Keystone patch panel, face plate or surface-mount box.   Specification • For Keystone ports with 19.2 x 14.9 mm • For fibre couplers • Colour: white • Dimensions (LxWxH): ca. 19.0 x 16.5 x 21.9 mm   Package content • 10 x Keystone cover

ADDER® rackmount komplekt RMK12-SH19-tolline 1U rackmount komplekt ADDERLink® INFINITY 4000/3000ADDER® rackmount tooted on loodud lihtsaks paigaldamiseks rack-keskkonnas. RMK12-SH on 19" 1U rackmount komplekt 2 x ADDERLink® INFINITY 4000/3000 seeria seadmetele ja ADDERLink INFINITY Manager ASP-001 seadmetele. See on alus, mis on loodud lihtsaks ja kiireks paigaldamiseks ja eemaldamiseks.