Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: UTP - unschielded twisted pair kaabel, 4 pairs Category: 5e Inner conductor diameter: 0.18 mm Coating type: PVC - polyvinyl chloride Lisaandmed: The wires are made of copper conductor kaabel (CCA), Printed pikkus counter at every meter of kaabel pikkus: 305 m värv: hall Brutokaal: 7.38 kg Packaging type: box 305m
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
Chateau LTE6 ax | Type Wireless Access Point | Wi-Fi 6 | USB | 4x10/100/1000M | 1x2.5GbE | Number of antennas 2 | Wireless Frequency Range 2.4-5Ghz | Dimensions 240 x 156 x 44 mm
TP-Link wifi ruuter TL-MR3420,g/b/n, 3G/3.75G/4G, USB 2.0 port UMTS/HSPA/EVDO standardile vastava USB modemi ühendamiseks, 4xLAN, saatevõimsus 2x3dBi, WEP/WPA-PSK/WPA2-PSK, 300Mbps
CPU: Qualcomm QCA9533 Internal Clock Rate100Base-TX Ports: 1Data Link Protocol Supports: Fast Ethernet/Ethernet Wi-Fi Wi-Fi Band sagedus1n IEEE 802.3at võrguseadeing Features: MDI/MDI-X switch Power over Ethernet (PoE) Power over Ethernet plus (PoE+) antenn1(RJ-45) Power over Ethernet: External External värv185 mm kõrgus (mm): 31mm laius (mm): 185 mm Maksimum Operating Ambient Temperature: 70 °C Minimum Operating Ambient Temperature12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 0.7 kg Retail Packaging Netokaal Carton1
The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing static routing and DHCP server. The UniFi Switch Pro 48 is an ideal aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. Features: (48) Gigabit RJ45 ports (4) 10G SFP+ ports Layer 2 and Layer 3* features UniFi SmartPower RPS DC input Near-silent cooling 1.3" touchscreen display Managed by UniFi Network Controller
Dell Adapter - USB 3 to Ethernet Type Adapter Interface SuperSpeed USB 3.0 to Gigabit Ethernet x 1 Color Black Dimensions 2.03 cm x 15.2 cm x 1.52 cm (WxDxH) Communication interface Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Protocols 10Mb LAN, 100Mb LAN, GigE Warranty Terms 1 year warranty
Dual-Radio Performance Gigabit Speeds The UniFi AC Pro AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. Sleek Ultra-Compact Design The UniFi AC Pro AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP. Scalable Enterprise Wi-Fi Management The UniFi Controller v4 software is a powerful enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
LTE-Advanced Mobile WiFi 4G LTE supported with up to 150Mbps download and 50Mbps upload speeds Supports up to 15 devices simultaneously All useful information at a glance with screen display 2550mAh battery for up to 10 hours of working Selectable 2.4GHz or 5GHz dual band WiFi Equipped with a micro SD card slot for up to 32GB of optional storage
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
