Original part number NPP-C524-002 Product name Gembird 19" patch panel 24 port 1U cat.5e with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 24 Type of connector 1 x RJ45 Category 5e Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 111 mm Width 483 mm Depth 45 mm Net weight 1.7 kg Colour Black
TRENDnet’s 4-Port USB 3.0 Mini Hub, model TU3-H4E, instantly adds four 5 Gbps SuperSpeed USB 3.0 ports to a computer. No CD installation required-simply plug in flash drives, storage enclosures, and other USB 3.0 devices at speeds ten times faster than a USB 2.0 connection. The TU3-H4E is also compatible with older USB 2.0 and 1.1 ports.
The new DIGITUS® Category 6 Class E, U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.Kaabli pikkus5 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvSinine, PunaneKaabli klassESuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7Ühendusklemmi kaitseEiKaabli värvSinine
24 x Gigabit PoE+ ports4 x Shared Gigabit ports (RJ-45 or SFP)370W PoE power budgetEasy-to-use web-based management interfaceSupports IPv6, LACP, VLAN, QoS, and IGMP SnoopingBandwidth control per portPrivate and Voice VLAN supportSmart Fan56Gbps switching capacityIEEE 802.1p QoS with queue scheduling support
8 x Gigabit PoE+ ports 61W PoE budget 16Gbps switching capacity Sturdy metal switch Plug and Play installation Use with TRENDnet's PoE Splitter to network and power non-PoE devices The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking. PoE Power A 61W PoE power budget supports up to eight Power over Ethernet devices. Gigabit Ethernet Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations. Compact Design With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation. PoE Supplies up to 30W of PoE+ power per port with a total power budget of 61W. Supports both PoE (802.3af) and PoE+ (802.3at) devices. Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Sturdy metal housing LED Indicators LED indicators convey port status
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: boot for RJ45 plug Wiring type: ei puuduta Lisaandmed: bag of 100tk värv: hall kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
Operational superiority - IP67 weather resilient Outdoor Access Point (AP) with 512 max concurrent client associations, 16 SSIDs, WPA-2 encryption, Meshing, Dynamic VLANs, DFS channels, Access control lists (ACL), zero touch provisioning and more – the 802.11ac wave2 powered e700 is perfect for today’s demanding high density outdoor Wi-Fi networks.High performance Wi-Fi - Standards based beamforming, on 5 GHz over a 4x4 Tx/Rx antenna array, can steer beams to the target client device delivering superior performance under high interference RF environments in both downlink and uplink* directions. Enterprise grade controller-less roaming, dynamic channel selection, automatic transmit power control, and more such cnPilot platform features ensure a high grade superior Wi-Fi network.Mesh - Rapidly setup multi-hop mesh networks either dedicating one radio (e.g.: 5 GHz) for mesh backhaul, or using both bands for simultaneous client and mesh access.Wireless Backhaul Integration - Roll out Wi-Fi networks rapidly with Cambium’s wireless backhaul powered from the aux PoE Out port on the e700 eliminating the need for a second power line. The aux PoE Out port can also power an 802.3af camera when security monitoring is needed near the hotspotResilience Dual on-board Active/Standby memory banks ensure higher availability. The e700 can store two versions of the software and if needed fall back to a working operational software, reducing the likelihood of site visits and increasing network up-time.
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
With the UniFi In-Wall HD Cover the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack. * - UniFi In-Wall HD AP sold separately!
