mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
Tootja: Netgear Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 16 tk Toetatud protokollid ja standardid: IEEE 802.3af - Power over Ethernet, IEEE 802.3at - Power over Ethernet improvement, DSCP - DiffServ Code Point, Jumbo frame tugi, IEEE 802.1p Class of Service, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az - Energy Efficient Ethernet, IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3x - Flow Control MAC addresses: 4000 Switch fabric maht: 32 mälupuhver: 1 MB võrgukiht: andmed puuduvad arvutikorpuse tüüp: kerge Form Factor maksimaalne energiatarbimine: 200 vatti laius: 286 mm kõrgus: 27 mm sügavus: 102 mm Netokaal: 0.88 kg andmeleht: spetsifikatsioon [LINK]
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
Mercusys AC1300 Whole Home Mesh Wi-Fi System Halo H30G (3-Pack) 802.11ac, 400+867 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support Yes, MU-MiMO Yes, White
BAT120 on esimene tööstuslik UPS (katkematu toiteallikas) Teltonika Networks'i tootevalikus. BAT120 on varustatud kahe 4-poolse alalisvoolupordiga toite sisse- ja väljundi jaoks. Sisendpinge ulatub 9V kuni 30V ja väljund 12VDC, kui see töötab akupealt. Kuigi kaasaegne tehnoloogia võimaldab meil teha imelisi asju, on see siiski tundlikum kui paljud arvavad. Seadmed sõltuvad stabiilsest ja pidevast energiavarustusest, et õigesti toimida. Kuna paljud süsteemid võivad elektrivoolu kõikumise tõttu katkeda, pakub Teltonika Networks teile võimalust pakkuda stabiilset energiat ühilduvatele* seadmetele meie uusima lisandiga. Ühilduvate seadmete hulka kuuluvad: RUT2xx, RUT9xx, RUT3xx, RUTXxx, TRB1xx, TRB2xx, TSW110 ja TCR100. Teltonika Networks toob turule BAT120, katkematu toiteallika lisaseadme! See uus täiendus meie tooteportfelli pakub ühilduvatele toodetele püsivat elektrivoolu, tagades teie IoT-lahenduse pideva ühenduvuse. Teltonika Networks'i tooted taaskäivituvad pinge kõikumise korral. See turvafunktsioon võib aga häirida pidevat andmevoolu, kui vajate pidevat ühenduvust ilma vähimagi katkestuseta. Kui tekib ootamatu elektrikatkestus, võib BAT120 toita ühendatud Teltonika Networks'i seadmeid kuni 6 tundi, vältides ühenduse katkemist ja pakkudes piisavalt aega esmase elektrivõrgu taastamiseks. Seda võimaldavad kaks 18650 Li-Ion akut. Samuti saate seadistada meie ühilduvaid seadmeid saatma SMS-i või e-posti hoiatuse, kui tekib voolukatkestus, mis võimaldab teil häirega kursis olla ja selle võimalikult kiiresti kõrvaldada. Kasvavad linnad toovad rohkem tehnoloogiat ühte kohta, eriti arengumaades. Elektrivõrgu laienemine ei suuda nõudlusega sammu pidada. Elektrijaamu, mis toodavad energiat taastuvatest allikatest, nagu tuul ja päike, ei saa pidevalt optimaalselt ära kasutada, tekitades ebaühtlase elektrivoolu. Ka elektrijaama ja lõpptarbija vaheline kaugus on stabiilse energiavarustuse seisukohalt oluline. Lõpuks kahjustab elektrivõrgu ebaseaduslik ühendamine oluliselt selle üldist stabiilsust, mistõttu tuleb seda pidevalt jälgida, kuid see ei ole selliste tegevuste eest täiesti ohutu.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
M1300 3-pack AC1200 Dual Band Whole Home Wi-Fi Mesh Wi-Fi AC1200 network 867 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band Seamless roaming, coverage throughout your home 2 Gigabit Ethernet ports Compatible with 15 additional DDNS providers PPTP/L2TP/OpenVPN/WireGuard/IPSec/Zerotier VPN
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Manage the whole network locally or from the cloud via web UI or Omada app. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment. - PoE+ Powered: Supports both Power over Ethernet (802.3at) and DC power supply for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP610
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.
The 802.3bt injector from DIGITUS offers an 85 watt PoE port as a midspan solution. Compact, cost-effective and fully IEEE802.3bt-compliant. The simple solution for remote power supply of wireless access points, IP security camera, VoIP phones, thin clients and other installations with PoE functionality.
Täiustatud WiFi 6 juurdepääsupunkt kõrge jõudluse ja paindliku paigaldusvõimalusegaSee WiFi 6 juurdepääsupunkt on loodud pakkuma suurepärast traadita ühendust, toetades täiustatud MU-MIMO tehnoloogiat ja mitme kasutaja samaaegset ühendamist. Ideaalne nii ärikeskkondadesse kui ka suure kasutajatihedusega kohtadesse, tagades sujuva ühenduse tänu PoE toitevarustusele ja mitmekülgsetele paigaldusvõimalustele.Mehaanilised spetsifikatsioonid:Mõõdud: Ø197 x 35 mm (Ø7.8 x 1.4") – stiilne ja madala profiiliga disain.Kaal:Ilma kinnitusteta: 580 g (1.3 lb)Kinnitusega: 720 g (1.6 lb)Korpuse materjal: Vastupidav polükarbonaat tagab pikaealisuse.Kinnituse materjal: Roostevaba teras (SUS304) kindla toe jaoks.Ilmastikukindlus: IP54 reiting, sobib varjulisse väliskeskkonda.Riistvara ja ühenduvus:Võrgu liides: (1) Gigabit Ethernet RJ45 port kiirete ühenduste jaoks.Juhtimisliides: Ethernet ja Bluetooth lihtsaks seadistamiseks ja haldamiseks.Toiteviis: PoE (Power over Ethernet).Toiteallikas: Ühilduv UniFi PoE lülitiga või PoE adapteriga (ei kuulu komplekti).Toetatud pingevahemik: 44—57V DC.Maksimaalne energiatarve: 13W.WiFi jõudlus:Maksimaalne edastusvõimsus:2.4 GHz: 22 dBm5 GHz: 26 dBm6 GHz: Ei ole toetatudMIMO:2.4 GHz: 2 x 2 UL MU-MIMO5 GHz: 4 x 4 DL/UL MU-MIMO6 GHz: Ei ole toetatudMaksimaalne andmeedastuskiirus:2.4 GHz: Kuni 573.5 Mbps (BW40)5 GHz: Kuni 4.8 Gbps (BW160)6 GHz: Ei ole toetatudAntenn ja LED indikaatorid:Antennivõimendus:2.4 GHz: 4 dBi5 GHz: 6 dBi6 GHz: Ei ole toetatudLED indikaatorid: Valged/sinised LED-id staatuse näitamiseks.Paigaldus ja töötingimused:Paigaldusvõimalused: Seinakinnituse ja laekinnituse tarvikud on kaasas.Töötemperatuur: -30 kuni 60° C (-22 kuni 140° F).Tööniiskus: 5 kuni 95% mitte-kondenseeriv.Sertifikaadid: CE, FCC, IC sertifitseeritud.Tarkvara ja WiFi standardid:WiFi standardid: 802.11a/b/g/n/ac/ax (WiFi 6), et tagada uusimad traadita tehnoloogiad.Traadita turvalisus: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) turvalisteks ühendusteks.BSSID: Toetab kuni 8 BSSID-d raadio kohta.VLAN tugi: 802.1Q täiustatud võrgu haldamiseks.Täiustatud QoS: Kasutajapõhine kiiruse piiramine liikluse optimeerimiseks.Külalisvõrgu isoleerimine: Toetatud parema võrgu turvalisuse jaoks.Samaaegsed kliendid: Toetab 350+ klienti samaaegselt.Null viivisega DFS: Jah* (toetatud tulevaste püsivara versioonidega).Toetatud andmeedastuskiirused:802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b: 1, 2, 5.5, 11 Mbps802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11n: 6.5 Mbps kuni 600 Mbps (MCS0 - MCS31, HT 20/40)802.11ac: 6.5 Mbps kuni 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)802.11ax (WiFi 6): 7.3 Mbps kuni 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.
