Allied Telesis 8 x 10/100T POE+ ports and 1 x combo ports (100/1000X SFP or 10/100/1000T Copper), Fixed AC power supply, EU Power Cord (AT-FS980M/9PS-50)
Toote kirjeldus inglise keeles:Switches with Essential L2 Features for SMB NetworksNETGEAR Smart Managed Switches offer powerful L2 and L2+/Layer 3 Lite features, better PoE functionality, and enhanced performance and usability. They are purposely designed for converged networks where voice, video, data are all carried on a single network platform. These switches are optimized for network efficiency, operational cost savings, and ease of management. This series of switches offers 8 to 52 port configurations both in Fast Ethernet and Gigabit Ethernet with PoE options. All switches come with Gigabit SFP ports for fiber connectivity. These switches are the ideal solution for businesses looking for the best combination of features, performance, and value.Designed for Converged Networks, Big or SmallPoE and PoE+ Support available for all configurationsAuto-Voice VLAN for fast and reliable deployment of VoIPAuto-Video VLAN, following the same concept of Auto Voice, help speed up your deployment of IP-based surveillance systemsStatic routing, helps route internal traffic for more efficient use of network resourcesIGMP and MLD snooping, provides advanced multicast filteringBuild a Future-Proof Network with NETGEARSolid performance with a non-blocking architecture, 8K MAC address table, 256 VLANs, 480 shared ACL entries, 32static routes, and 1,024 Multicast GroupsComprehensive IPv6 management, QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based networkingPoE+ support on all PoE models with the GS728TPP providing PoE+ support on all ports, adding the flexibility to add power-hungry devices such as video phone, PTZ camera and 11ac Wireless APs into the network in the futureThe presence of SFP ports provide necessary fiber uplinks, while dedicated SFP ports on many models further builds uplink redundancy and failover, improving reliability and availability for network virtualizationEnergy Efficient Ethernet (IEEE 802.3az) support for more energy savings in the future when more EEE-compliant end devices come to marketAdvanced QoS with IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - Diff Serv)Dynamic VLAN assignment for easy user authentication and location-independent access to networkNetwork Development Made EasyAuto Voice VLAN for easy development of VoIPAuto Video for simple deployment of IP SurveillanceACL Wizard for a guided tour to set up your network access controlSmart Control Center, a powerful tool for multi-switch discovery, deployment, monitoring and firmware upgradesPoE Timer for scheduling the on/off time of your PoE powered devicesSmart IT, not Big IT Easy to manage via web browser-based management GUI or Smart Control Center for multi-switch deploymentStandard-based technology, ensuring interoperability with any standard-based devices in the existing networkDual firmware images, improving reliability and uptime to your network
Allied Telesis 20 x 100/1000-T PoE+ , 4x 100/1000-T PoE+ (multi-giga is not supported), 4x SFP+ Ports, L3 Stackable Switch, EU Power Cord (AT-x530-28GPXm-50)
Fiiberoptika ühendus/patch paneelid on 19“ laiused ning kõrgusega 1U või 2U. Paneelid on liikuva esipaneeliga kui ka liikuvate küljekinnitustega, mis tagab parema juurdepääsetavuse paigalduse ajaks. Paneelid on kahes erinevas värvitoonis RAL 7035 (hall) ja RAL 9005 (must)
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
QuPanel LTE HP SISODirectional High Power multiband LTE SISO antennaQuPanel LTE HP directional high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT230 TRB140 TRB141 TRB142 TRB145 TRM240 TRM250 and other SISO LTE/3G/2G modems and routers.Cable length: 5m
The Archer VR400 unlocks the full potential of your Internet connection by providing combined dual band Wi-Fi speeds of up to 1.2 Gbps, including 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band, eliminating lag and buffering from your online experience. Two dedicated Wi-Fi networks support more devices and reduce wireless interference to create stable connections.
LtAP LR8 LTE - a compact all-in-one solution with LTE GPS and wireless support for LoRa® in a rugged heavy-duty case!Inside the heavy-duty case there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem the other one is populated with the concentrator gateway card for LoRa® technology.There are three powering options: DC jack PoE-in and automotive.Internet-of-things has never been so affordableTo fully understand what this device can do we need to talk about Internet-of-things. Let’s start with an example. Imagine a farmer who has cattle an irrigation system for the crops and storage for the goods. On a day-to-day basis he needs to: track the animals monitor the grain stock level control the irrigation system For all these tasks the farmer can use low-cost wireless sensors. By connecting them to the LtAP - he can gather the real-time data combine it with the location information of the vehicle and send it to the cloud via high-speed LTE. Now all the information he needs to monitor and plan the growth of his farms is in one place. So simple and so handy. The wireless technology behind this is called LoRa® which stands for Long Range. It requires very low power. That’s why LoRa® is the best way to build your Internet-of-things solutions. LoRa® can be used for anything from smart homes to agriculture supply chains logistics and even smart cities. Monitor parking spaces track utility services measure environmental data and so on - the possibilities are endless.There is even a free server infrastructure that you can use - The Things Network fully supported by the LtAP LR8 LTE kit. With a large community of enthusiasts and developers around the world you will never be alone with your questions regarding the LoRa® network.Perfect for logistics and trackingThere are 3 MiniSIM slots you can use to set up automatic switching between mobile operators. Very convenient if you have to cross the border regularly. The device features two internal LTE antennas but you can use the U.FL connectors to add external antennas of your choice for even better coverage. The same goes for the GPS – you can attach an external antenna as well. By the way Mikrotik has provided a simple application example on the RouterOS documentation website so you can start real-time location tracking right away!The Things NetworkMikrotik products for LoRa® are ready to work with “The Things Network” - the famous open source infrastructure that provides free LoRa® network coverage and has tons of apps for your needs. With the help of “The Things Network” you can get started with the Internetof- things within a day. And it is easily upgradable to enterprise-grade network “The Things Industries”.The setup is so easy - anyone can learn it. No need to reinvent the wheel – join “The Things Network” to save time and energy with smart solutions!
