Throughput: 128 Forwarding rate: 95.24 MAC address table size: 16384 Jumbo frame size: 12.288 Maximum number of units per stack: 8 Number of VLAN groups: 4000 Power consumption: 21.5 Mean time between failures (MTBF): 468252 Weight: 2.33
Seda Delocki kaablijuhtimispaneeli saab paigaldada 10″ racki. D-rõngaste konksude abil saab patrullkaableid kenasti horisontaalselt suunata. Spetsifikatsioon - Paigaldamiseks 10″ riiulisse, 1U - 3 konksuga metallist paneel - Värv: helehall RAL 7035 - Mõõtmed (LxSxK): ca. 254 x 82 x 44,5 mm Pakendi sisu - 10″ kaablijuhtimispaneel
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Adapteriga saab ühendada erinevaid seadmeid, millel on sobiv alalisvoolu toitepistik ja mis saavad eraldi toite (sõltuvalt seadme nõuetest). Spetsifikatsioon - Pistikud: 1 x alalisvoolu 5,5 x 2,1 mm emissiooniühendus. 1 x 2-pin klemmiplokk - Positiivne poolus sees, negatiivne poolus väljas - Eemaldatav klemmiplokk - Pitch: 5,00 mm Pakendi sisu - Adapter
Kasutage seda antennikaablit, et ühendada oma kodukino seadmed, nt teler, antenni pistikupesaga. Spetsifikatsioon - Liitmik: IEC (UHF, koaksiaal) pistik > IEC (UHF, koaksiaal) pistikupesa. - Kaabli tüüp: RG-6/U neljakilbiline varjestus - Impedants: 75 Ohm - Varjestuse kvaliteet: >120 dB - Väikseim painderaadius: 40 mm - Kullatud pistik ja metallist korpus - Värv: Kaabel: must pistik: antratsiit / kuldne - Kaabli läbimõõt: ca. 7,4 mm - Kaabli pikkus: ca 1 m (koos pistikutega) Süsteeminõuded - Vaba IEC-pesa Pakendi sisu - Antennikaabel
Kasutage seda antennikaablit, et ühendada oma kodukino seadmed, nt teler, antenni pistikupesaga. Spetsifikatsioon - Liitmik: IEC (UHF, koaksiaal) pistik > IEC (UHF, koaksiaal) pistikupesa. - Kaabli tüüp: RG-6/U neljakilbiline varjestus - Impedants: 75 Ohm - Varjestuse kvaliteet: >120 dB - Väikseim painderaadius: 40 mm - Kullatud pistik ja metallist korpus - Värv: Kaabel: must pistik: antratsiit / kuldne - Kaabli läbimõõt: ca. 7,4 mm - Kaabli pikkus: u. 3 m (koos pistikuga) Süsteeminõuded - Vaba IEC-pesa Pakendi sisu - Antennikaabel
Kasutage seda antennikaablit, et ühendada oma kodukino seadmed, nt teler, antenni pistikupesaga. Spetsifikatsioon - Liitmik: IEC (UHF, koaksiaal) pistik > IEC (UHF, koaksiaal) pistikupesa. - Kaabli tüüp: RG-6/U neljakilbiline varjestus - Impedants: 75 Ohm - Varjestuse kvaliteet: >120 dB - Väikseim painderaadius: 40 mm - Kullatud pistik ja metallist korpus - Värv: Kaabel: must pistik: antratsiit / kuldne - Kaabli läbimõõt: ca. 7,4 mm - Kaabli pikkus: u. 3 m (koos pistikuga) Süsteeminõuded - Vaba IEC-pesa Pakendi sisu - Antennikaabel
Kasutage seda antennikaablit, et ühendada oma kodukino seadmed, nt teler, antenni pistikupesaga. Spetsifikatsioon - Liitmik: IEC (UHF, koaksiaal) pistik > IEC (UHF, koaksiaal) pistikupesa. - Kaabli tüüp: RG-6/U neljakilbiline varjestus - Impedants: 75 Ohm - Varjestuse kvaliteet: >120 dB - Väikseim painderaadius: 40 mm - Kullatud pistik ja metallist korpus - Värv: Kaabel: valge pistik: antratsiit / kuldne - Kaabli läbimõõt: ca. 7,4 mm - Kaabli pikkus: ca 1 m (koos pistikutega) Süsteeminõuded - Vaba IEC-pistikupesa Pakendi sisu - Antennikaabel
Description This DIN rail by Delock can be used to mounting different electronic devices and components. Multifunctional application The DIN rail can be mounted in a control cabinet and is used as a mounting system, e.g. for power supplies, screw terminals and interface modules. Simple mounting option To allow easy installation, the DIN rail is provided with a mounting hole at both sides. Specification • Mounting hole: 12.0 x 5.5 mm • Material: aluminium • Dimensions (LxWxH): ca. 500.0 x 35,0 x 7,5 mm Package content • 1 x DIN rail • 2 x end cover
Description This DIN rail by Delock can be used to mounting different electronic devices and components. Multifunctional application The DIN rail can be mounted in a control cabinet and is used as a mounting system, e.g. for power supplies, screw terminals and interface modules. Simple mounting option To allow easy installation, the DIN rail is provided with a mounting hole at both sides. Specification • Mounting hole: 15.0 x 6.2 mm • Material: steel • Dimensions (LxWxH): ca. 250.0 x 35,0 x 7,5 mm Package content • 1 x DIN rail • 2 x end cover
Description This DIN rail by Delock can be used to mounting different electronic devices and components. Multifunctional application The DIN rail can be mounted in a control cabinet and is used as a mounting system, e.g. for power supplies, screw terminals and interface modules. Simple mounting option To allow easy installation, the DIN rail is provided with a mounting hole at both sides. Specification • Mounting hole: 15.0 x 6.2 mm • Material: steel • Dimensions (LxWxH): ca. 482.0 x 35.0 x 7.5 mm Package content • 1 x DIN rail • 2 x end cover
Neid Delocki roostevabast terasest valmistatud kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Märkus Roostevabast terasest kaablisidemete jaoks sobiv paigaldustööriist on Delocki poolt valikuliselt saadaval. Artikli number: 86503. Spetsifikatsioon Pikkus: umbes 150 mm Laius: ca. 4,6 mm Kogus: 20 tükki polü koti kohta Ühekordseks kasutamiseks Materjal: roostevaba teras 304 (V2A) Tõmbetugevus: kuni 65 kg Pakendi sisu Kaablisidemete komplekt
Neid Delocki roostevabast terasest kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Suurepärane vastupidavus Roostevabast terasest kaablisidemeid iseloomustab kõrge kuumakindlus, tõmbetugevus ja korrosioonikindlus. Lihtne kasutamine Roostevabast terasest kaablisidemetel on iselukustuv kuulikinnitus ja neid on lihtne paigaldada. Roostevabast terasest kaablisidemete jaoks sobiv paigaldustööriist aitab tööd lihtsustada. Märkus Sobiv paigaldustööriist roostevabast terasest kaablisidemete jaoks on Delocki poolt valikuliselt saadaval. Artikli number: 86503. Spetsifikatsioon Pikkus: umbes 200 mm Laius: ca. 4,6 mm Kogus: Suurus: 10 tükki polü koti kohta Värv: punane Ühekordseks kasutamiseks Materjal: roostevaba teras 304 Keskkonnatemperatuur: -40 °C ~ 150 °C Tõmbetugevus: kuni 45 kg Pakendi sisu 10 x roostevabast terasest kaablisidemed
Neid Delocki roostevabast terasest kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Suurepärane vastupidavus Roostevabast terasest kaablisidemeid iseloomustab kõrge kuumakindlus, tõmbetugevus ja korrosioonikindlus. Lihtne kasutamine Roostevabast terasest kaablisidemetel on iselukustuv kuulikinnitus ja neid on lihtne paigaldada. Roostevabast terasest kaablisidemete jaoks sobiv paigaldustööriist aitab tööd lihtsustada. Märkus Sobiv paigaldustööriist roostevabast terasest kaablisidemete jaoks on Delocki poolt valikuliselt saadaval. Artikli number: 86503. Spetsifikatsioon Pikkus: umbes 200 mm Laius: ca. 4,6 mm Kogus: Suurus: 10 tükki polü koti kohta Värv: kollane Ühekordseks kasutamiseks Materjal: roostevaba teras 304 Keskkonnatemperatuur: -40 °C ~ 150 °C Tõmbetugevus: kuni 45 kg Pakendi sisu 10 x roostevabast terasest kaablisidemed
Neid Delocki roostevabast terasest kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Suurepärane vastupidavus Roostevabast terasest kaablisidemeid iseloomustab kõrge kuumakindlus, tõmbetugevus ja korrosioonikindlus. Lihtne kasutamine Roostevabast terasest kaablisidemetel on iselukustuv kuulikinnitus ja neid on lihtne paigaldada. Roostevabast terasest kaablisidemete jaoks sobiv paigaldustööriist aitab tööd lihtsustada. Märkus Sobiv paigaldustööriist roostevabast terasest kaablisidemete jaoks on Delocki poolt valikuliselt saadaval. Artikli number: 86503. Spetsifikatsioon Pikkus: ca 500 mm Laius: ca. 4,6 mm Kogus: Suurus: 10 tükki polü koti kohta Värv: roheline Ühekordseks kasutamiseks Materjal: roostevaba teras 304 Keskkonnatemperatuur: -40 °C ~ 150 °C Tõmbetugevus: kuni 45 kg Pakendi sisu 10 x roostevabast terasest kaablisidemed
Neid Delocki roostevabast terasest kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Suurepärane vastupidavus Roostevabast terasest kaablisidemeid iseloomustab kõrge kuumakindlus, tõmbetugevus ja korrosioonikindlus. Lihtne kasutamine Roostevabast terasest kaablisidemetel on iselukustuv kuulikinnitus ja neid on lihtne paigaldada. Roostevabast terasest kaablisidemete jaoks sobiv paigaldustööriist aitab tööd lihtsustada. Märkus Sobiv paigaldustööriist roostevabast terasest kaablisidemete jaoks on Delocki poolt valikuliselt saadaval. Artikli number: 86503. Spetsifikatsioon Pikkus: ca 500 mm Laius: ca. 7,9 mm Kogus: 10 tükki polü koti kohta Värv: roheline Ühekordseks kasutamiseks Materjal: roostevaba teras 304 Keskkonnatemperatuur: -40 °C ~ 150 °C Tõmbetugevus: kuni 80 kg Pakendi sisu 10 x roostevabast terasest kaablisidemed
Neid Delocki kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja voolikute ruumi säästvaks rullimiseks. Kaablisidemed on saadaval 6 erinevas värvitoonis, mis tagavad parema märgistuse ja nähtavuse. Spetsifikatsioon - Pikkus: ca. 200 mm - Laius: ca. 3,6 mm - Kogus: 100 tükki polü koti kohta: 100 tükki polü koti kohta 10 x kollane 10 x must 10 x roheline 10 x punane 10 x sinine 50 x valge - Ühekordseks kasutamiseks - Materjal: nailon Pakendi sisu - Kaablisidemete komplekt
Neid Delocki kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja voolikute ruumi säästvaks rullimiseks. Kaablisidemed on saadaval 6 erinevas värvitoonis, mis tagavad parema märgistuse ja nähtavuse. Spetsifikatsioon - Pikkus: ca. 100 mm - Laius: ca. 2,5 mm - Kogus: Polükotis 100 tk. 10 x kollane 10 x must 10 x roheline 10 x punane 10 x sinine 50 x läbipaistev - Ei ole korduvkasutatavad - Materjal: Nailon 66 Pakendi sisu - Kaablisidemete komplekt
Neid Delocki kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja voolikute ruumi säästvaks rullimiseks. Kaablisidemed on saadaval 4 erinevas värvitoonis, mis tagavad parema märgistuse ja nähtavuse. Spetsifikatsioon - Mõõdud: Pikkus x laius ca. 100 x 2,5 mm. Pikkus x laius ca. 200 x 3,6 mm. - Kogus: x 2,5 mm: 100 tk polümeerikotti. 25 x kollane 25 x roheline 25 x punane 25 x läbipaistev 100 tk 200 x 3,6 mm suuruses polümeerikotis 25 x kollane 25 x roheline 25 x punane 25 x läbipaistev - Ei ole korduvkasutatavad - Materjal: Nailon Pakendi sisu - Kaablisidemete komplekt
The ADDERView Analogue Enhanced SecureSwitch (AVSC1102) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks" together with secure smartcard reader sharing. The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Common-Access-Card (CAC) reader and keyboard support Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSC1102 Features Tempest & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. SmartCard (CAC) reader support An optional smart card reader can be connected and used in conjunction with user authentication schemes. The smartcard system inside the switch is designed to introduce no greater risk than would be present if each computer had a separate card reader and the card was moved between them. Advanced tamper protection / reporting Anti-subversion monitoring - The enhanced models continually monitor their various defences for potential subversions (even when power is removed), such as: Dismantling of the case Tampering with the circuitry Loss or corruption of authentication security information. Authentication function AdderView Secure switches provide a trusted mechanism whereby you can confirm the units authenticity. Each AdderView Secure unit has a unique identity code configured within their circuitry. On request, Adder can provide you with an Authentication Certificate. AdderView Analogue Enhanced Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Enhanced Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry.
The ADDERView Analogue Enhanced SecureSwitch (AVSC1102) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks" together with secure smartcard reader sharing. The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Common-Access-Card (CAC) reader and keyboard support Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSC1102 Features Tempest & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. SmartCard (CAC) reader support An optional smart card reader can be connected and used in conjunction with user authentication schemes. The smartcard system inside the switch is designed to introduce no greater risk than would be present if each computer had a separate card reader and the card was moved between them. Advanced tamper protection / reporting Anti-subversion monitoring - The enhanced models continually monitor their various defences for potential subversions (even when power is removed), such as: Dismantling of the case Tampering with the circuitry Loss or corruption of authentication security information. Authentication function AdderView Secure switches provide a trusted mechanism whereby you can confirm the units authenticity. Each AdderView Secure unit has a unique identity code configured within their circuitry. On request, Adder can provide you with an Authentication Certificate. AdderView Analogue Enhanced Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Enhanced Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry. One time programmable microprocessors Data isolation is assured by hardware and so is not compromised by any changes to the microprocessor software. Microprocessors use one time programmable memory so flash upgrades are not possible
The ADDERView Analogue Standard SecureSwitch (AVSV1002) allows a keyboard, monitor and mouse to be shared between high and low security systems, "red and black networks". The high density, highly robust, small form factor unit ensures maximized security to prevent the compromise of critical data. Switch between two computers in secure environment High definition VGA video up to 1920 x 1200 @ 60Hz resolution USB keyboard & mouse - PS/2 with optional adapter Tempest Certified (USA NSTISSAM Level I and NATO SDIP-27 Level A) NIAP 3.0 Common Criteria EAL 4+ Certified (augmented by ALC_FLR.2 and ATE_DPT.2) See Detailed Layout Adder AVSV1002 Features Tempest, EAL2+ & EAL4+ (NIAP 3.0) certified Tempest testing is a strict NSA specification and a NATO certification to ensure that sensitive equipment doesn't leak information. Adder's new secure switch has been tested and qualified to the strictest Tempest standards (USA NSTISSAM Level I and NATO SDIP-27 Level A). This and 80dB crosstalk isolation means that the switches are amongst the lowest leakage KVMs in the world. AdderView Analogue Standard Secure switch checks its own operation The hardware and software must agree before data flow is enabled. The switch constantly checks its own operation and will stop operating and flash its error light if an unanticipated event occurs. Minimal emissions profile - 80dB crosstalk isolation The AdderView Analogue Standard Secure switch is heavily shielded with double shielding in critical areas to minimize the risk of eavesdropping equipment being able to pick up signals from the equipment. The switch boasts an amazingly high level of electrical crosstalk isolation that is greater than 80dB, giving further peace of mind. No shared RAM between ports The keyboard and mouse processor is powered down and reset at each switchover to thwart shared RAM leakages. Separate memories hold the num, caps and scroll states and are only accessible when the relevant channel is selected. All data buffers are actively cleared once they have been used. Secure USB function The USB ports will only support keyboards, mice and SmartCard / Common Access Cards (CAC). Other devices, such as USB storage drives, are actively prohibited. Independent power supplies block power line signalling The circuitry for each port is independently powered from the USB lead. Power line signaling is therefore blocked because different port circuits don't share the same power feed. Uni-directional data paths for keyboard and mouse One-way data paths ensure that data isolation does not rely on trusting microprocessor software, but is instead assured by hardware and prevents a hidden software weaknesses that could potentially cause data leakage. A unidirectional structure also protects against timing analysis or forced malfunction attacks and prevents computers influencing the operation of any common circuitry. One time programmable microprocessors Data isolation is assured by hardware and so is not compromised by any changes to the microprocessor software. Microprocessors use one time programmable memory so flash upgrades are not possible AVSV1002 Package Contents (1) AVSV1002 KVM Switch (1) 5V, 2A Power supply and US-specific power lead (1) Information CD-ROM (4) Self-adhesive rubber feet (1) 2-Year Limited Warranty & Lifetime World Class Support AVSV1002-US Resources Adder AVSV1002 Datasheet (PDF) Adder AVSV1002 Manual (PDF) Adder AVSV1002-US Specifications Mechanical Physical 1U High Width 9.25 in. (235 mm.) Height 1.73 in. (44 mm.) Depth 5.9 in. (150 mm.) Construction Compact case, robust metal construction, extensive shielding Compatibility Hardware Compatibility Compatible with all known platforms featuring VGA video and USB HID or PS/2 connectivity Software Compatibility All known software and operating systems including Windows (all), DOS, Linux, Unix, BSD, Sun OS, Solaris, Mac OS, NetWare etc. Video Resolution Analog: 1920 x 1200 @60Hz Computer Connections at Switch 2 x USB HID (Keyboard/Mouse), HD-15 VGA, 2 x system link connection, smart card USB Local KVM Console Connection Video 3x USB type A, 1 x VGA HD-15 Keyboard/Mouse USB Power 100-240 VAC 47/63Hz Operating Temperature 0°C to 40°C / 32°F to 104°F Approvals CE, FCC, Designed to meet Common Criteria EAL4+ & EAL2+ certified (certificates available), Tempest certified AVSV1002 is also known as the AVSV1002-US and AVSV1002-USA.
These cable ties by Delock can be used to bundle exposed cables to provide neat and orderly sorting. Special fastener The fastener ensures a secure and firm hold of the cable bundles. Reusable Multiple opening and closing is possible. Brilliant resistance The cable ties have a good resistance to high temperatures and they are characterized by their high flexibility. Specification • Length: ca. 115 mm • Width: ca. 4.5 mm • Quantity: 20 pieces per poly bag • Bundle diameter: max. 25 mm • Reusable • Flexible • Environmental temperature: -30 °C ~ 85 °C • Colour: black / transparent • Material: plastic Package content • 10 x zip-tie black • 10 x zip-tie transparent