TU2-ET100 on kiire USB võrguadapter, mis võimaldab sul luua hetkega USB toega laua- või sülearvutist ühendus 10/100 Mbps kohtvõrguga. Seade on ühilduv USB 2.0 ja tagasiühilduv USB 1.0 ja 1.1 standarditega, selle abil saad jagada faile ning printereid ja kasutada interneti püsiühendust, et tutvuda väärtuslike veebiressurssidega.Võimalused Ühildub USB 2.0, 1.1 ja 1.0 spetsifikatsioonidega Ühildub IEEE 802.3 ja IEEE 802.3u spetsifikatsioonidega ANSI/IEEE 802.3 automaatse kiirusevaliku spetsifika
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 8 x Gigabit Auto-MDIX PoE / PoE+ ports Provides up to 30 watts for PoE+ Provides up to 15.4 watts for PoE Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
Compact Footprint for Deployment Flexibility The compact form factor allows the airFiber X Antennas to be used in various applications, from carrier backhauls between towers to PtP bridging between buildings. Plug and Play Integration The airFiber X Antennas are designed to integrate seamlessly with the airFiber X radios. Advanced RF Isolation Design The innovative industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high‑capacity, multipoint networks.
LevelOne GEU-0521 is 5-port SOHO Gigabit Ethernet Switch that is designed for small or medium network environment to strengthen its network connection. This product is compact in size, making it ideal for SOHO users with limited space. This product is easy to install. It is a superb choice for expanding your network.High-Speed NetworkingThe GEU-0521 provides an excellent solution for expanding your Gigabit network. By Gigabit speed, this product provides high flexibility and high bandwidth connectivity to servers, workstations and other attached devices. It enables you to save time transferring large files.Auto-MDI/MDI-XEvery copper port can automatically sense your type of cable, so there is no need for crossover cables whether you are connecting this switch to another switch or to a computer.Auto-NegotiationEvery port can automatically sense if the connected network devices are running at 10Mbps, 100Mbps or 1000Mbps and Half/Full-Duplex mode, and adjust accordingly.Non-BlockingThis switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 2000Mbps of bandwidth in full-duplex mode. This Features provides full wire speed to the connected devices and allows you to run a smooth network.Store and ForwardBy this function, this switch can maximize network performance while minimizing the propagation of bad network packets.Transfer RateLAN 10/100/1000 MBit/sLEDs Activity, 5x Lan, PowerPortsSFP 1RJ-45 LAN 4PowerOperating 10 watt(s)Remarks Transferrate 10 MBit/s: 14.880 Pakete/s, Transferrate 100 MBit/s: 148.800 Pakete/s, Transferrate 1.000 MBit/s: 1.488.000 Pakete/s, Puffer-memory: 104 KB, Jumbo-Frame-Größe: 9 KB, wandmontagefähigFeatures compatible with den Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE802.3x Back-Pressure (Half-Duplex) and Flow Control; support IEEE 802.3z 1000BaseSX/LX; 1.000 MAC addresses; Store-And-Forward; Non-Blocking-architecture; Plug-and-PlayProduct dimensions 130 x 24 x 77 mmWeight 280 grams
Features- Extends the distance to your USB device(s) up to 12 meters (36’)- USB specification version 2.0 / 1.1 compliant- Plug and play. No additional driver required- Up to 5 extender cables can be chained for a distance of up to 60 meters- Lockable mechanical design for secure connection- Bus powered. No power adapter required- Multiplatform support – Windows, MacPackage Contents- 1x 1-Port USB 2.0 Extender CableKaabli pikkus12 mUSB versioon2.0Pistmik 1USB APistmik 2USB ASuguSisestatav konnektor/sisekonnektorToote värvValgeMaterjalPlastAndmeedastuskiirus (maksimaalne)480 Mbit/sKaal560 gUSB-pistmiku tüüpUSB Type-AKaasnevate toodete arv1 tkPortide hulk1
Original part number CS1642A-AT-G Product name ATEN CS1642A 2-port DVI Dual View USB 2.0 KVMP Switch, 2.1 Surround Sound Producer Aten Class of product KVM switches
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Full-Band 5 and 2.4 GHz Coverage The Rocket®5ac Prism covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket5ac Prism features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 48 Type of ühenduspesa: 48 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
The pair of Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. The pair of Dual Wavelength Single Mode LC Type modules must be used together in order to span distances up to 10km (6.2 miles). Two modules are included, each with 1 x 1000Mbps-LX (LC Simplex -Type) Mini-GBIC connector.Andmeedastuskiirus (maksimaalne)1000 Mbit/sLiidese tüüpSFPFiiberoptiline pistmikLCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uSFP-transiiveri tüüpLRKaabli tüüpSingle-modeIsehäälestuvJahKäigultvahetusJahMaksimaalne ülekandekaugus40000 m
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
Hardened IP30 rated SFP to Gigabit UPoE converterSFP port accommodates Multi or Single Mode fiberUp to 40 km fiber networking distances with the TI-MGBS40 SFP moduleProvides up to 60W for PoE, PoE+ and UPoE compliant devicesIncludes DIN-rail and wall mountsWide operating temperature range -40 to 75 °C (-40 to 167 °F)Overload current protectionPowers supply sold separately (model TI-S12048)
- Must pair with TEG-MGBS10D3 or other compatible module- LC Simplex connector-type- Dual wavelength fiber mode- Spans distances up to 10 km (6.2 miles)- Compatible with standard SFP slotsThe hot-pluggable TEG-MGBS10D5 must be paired with the TEG-MGBS10D3 or other compatible module. This SFP Dual Wavelength Single Mode LC Type module spans distances of up to 10 kilometers (6.2 miles). The SFP interface is compatible with standard SFP slots and supports a 1000 Mbps-LX interface.Andmeedastuskiirus (maksimaalne)1000 Mbit/sLiidese tüüpSFPFiiberoptiline pistmikLCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uSFP-transiiveri tüüpLXKaabli tüüpSingle-modeIsehäälestuvJahKäigultvahetusJahMaksimaalne ülekandekaugus10000 m
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 3m
