This USB cable by Delock enables the extension of a USB 3.0 connection. Specification • Connector: 1 x USB 3.0 Type-A male > 1 x USB 3.0 Type-A female • Cable gauge: 26 + 28 AWG data line 22 AWG power line • Cable diameter: ca. 7 mm • Copper conductor • Gold-plated connector • Cable double shielded • Data transfer rate up to: SuperSpeed 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • Colour: black • Length incl. connector: ca. 5.0 m System requirements • PC or laptop with a free USB Type-A port Package content • USB 3.0 cable
Simplify your technology transition with Intel Ethernet X710-T2L and X710-T4L network adapters. Auto-negotiation of port speeds provides maximum flexibility in dual- and quad-port 10GBASE-T configurations. These low-power power supplies also support Energy Efficient Ethernet technology to effectively reduce power consumption during periods of low data activity. The X710-T2L and X710-T4L are part of the Intel Ethernet 700 series, the foundation of server connectivity; enabling broad interoperability, critical performance optimizations and increased flexibility for network solutions across communications, cloud and enterprise IT. Interoperability across multiple speeds and media types ensures broad compatibility supported by extensive testing and validation. Intelligent offload optimization and accelerators to unlock network performance on Intel Xeon-based servers. Agility kernel drivers and Data Plane Development Kit (DPDK) for scalable packet processing. The Intel Ethernet 700 Series delivers network performance across a wide range of network port speeds with intelligent offload, advanced packet processing, and high-quality open source drivers.
- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support
Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 24 V DC, 57 V DC väljundpinge: 24 V DC, 57 V DC Lisaandmed: 16 ports 100Mbps, Input ja väljund pinge 24 to 57 V DC
New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosureHere’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.
See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
See Delocki adapter võimaldab ühendada USB Type-C™ sisendiga seadme USB Type-A emasportiga. Spetsifikatsioon - Liitmikud: 1 x USB 2.0 Type-A isane (host): 1 x USB 2.0 Type-A isane (host) 1 x USB Type-C™ female (seade) - Andmeedastuskiirus kuni 480 Mbit/s - Maksimaalne väljundvool: 3 A - Pinge: max. 5 V - Värv: must - Mõõtmed (LxSxK): ca. 20 x 15 x 7 mm Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB-C™ adapter
"Qoltec 57037 4G LTE ümbersuunatud antenn DUAL | 5dBi | Väliantenn on vastupidav ja mitmekülgne antenn, mis on mõeldud 4G LTE signaali kvaliteedi ja tugevuse parandamiseks. Tänu oma kõikehõlmavale võimekusele on see antenn ideaalne välitingimustes kasutamiseks, pakkudes täielikku katvust ja suurepärast ühenduvust teie seadmetele, olenemata sellest, kas olete eemal või soovite suurendada signaali vastuvõttu keerulises keskkonnas. 5 dBi võimendus tagab suure signaali võimenduse, mille tulemuseks on suurem andmeedastuskiirus ja suurem ühenduse usaldusväärsus. Kahehäälne seadistus võimaldab samaaegset ühendust mitme seadme või võrguga, optimeerides jõudlust nii tööstuslikuks kui ka isiklikuks kasutamiseks. Välitingimustele vastupidavaks kavandatud antenn on ehitatud vastupidavasse, karmi ilmastikukindlasse konstruktsiooni, mis tagab vastupidavuse ja püsiva jõudluse. Antenni on lihtne paigaldada, sest kaasas on kõik vajalikud paigaldusvahendid ja üksikasjalikud juhised, mistõttu on seda lihtne paigaldada ka minimaalsete tehniliste teadmistega inimestele. Parandage oma traadita seadistust Qoltec 57037 abil ja nautige stabiilset, kiiret internetiühendust, mis vastab teie praegustele ja tulevastele digitaalsetele vajadustele.
Parameters Rated Value Single output power 20 W Input voltage range 100-240 VAC 50/60 Hz DC output voltage 12 V DC output current 0~1.67 A Output ripple and noise 120 mVp-p Line regulation ±1 % Load regulation ±1 % Efficiency 80 % Adjustable range for DC voltage ±1 % Test standard EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013EN55022:2010EN61000-3-2:2014EN61000-3-3:2013EN55024:2010/A1:2015 Inrush current Cold start current 20 A/ 115 VAC; 40 A/ 230 VAC Overload protection 105 % ~ 160 % cut off the output automatic recovery Over voltage protection 120 % ~ 140 % shut down O/P voltage re-power on to recover Setup rise hold up time 500 ms; 30 ms/ 230 VAC at full load; 1000 ms; 30 ms/ 115 VAC at full load Withstand voltage I/P-O/P: 1.5 kV; I/P-FG: 1.5 kV; O/P-FG: 0.5 kV 1 minute Isolation resistance I/P-O/P I/P-FG O/P-FG: 500 VDC/ 1000 MΩ Working temperature -10 °C ~ +50 °C Mounting options 35 mm DIN Rail Dimensions 22.5 x 90 x 100 mm Weight 190 g
"Cisco Catalyst 1300-24XT kommutaator kuulub Cisco täielikult hallatavate kommutaatorite sarja, mis pakuvad usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudes. Need kommutaatorid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebi armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
Discover the full potential of your networkExperience a reliable and efficient plug-and-play network device. With 8 10/100/1000 Mbps ports with PoE function, as well as additional 2 Uplink (RJ45 1000 Mbps) and SFP (fiber 1000 Mbps) ports, the device allows you to create a flexible and scalable LAN - without unnecessary power cables, external power supplies or additional switches.Reliable communication - Widely used in any spaceThe switch is designed for users who need a reliable network connection in various environments: in home multimedia networks (movie streaming, online gaming, smart home operation), In IP surveillance (support for PoE-powered cameras), in small and medium-sized companies (Wi-Fi access points, VoIP, NAS servers), in fiber optic installations (thanks to the SFP port - e.g., interconnection between buildings). Power up and transfer data at speeds of up to 1 Gb/sDiscover new possibilities with a Qoltec device that offers: Compliant with IEEE 802.3af - offering up to 15.4W per port and up to 120W total output power for the entire switch, Automatic detection of PoE devices, SFP port for fiber optic connections, Data transmission speed up to 1Gb/s, Robust metal housing protects the electronics inside and allows for operation in more demanding conditions, Quiet operation thanks to passive cooling, Plug & Play - no configuration. Quiet operation, sturdy metal construction and instant installationOur device Offers instant and hassle-free installation, thanks to Plug &Play technology, which requires no additional configuration or technical expertise. You only need to follow a few simple steps. First, connect the devices to the appropriate RJ45 ports using the appropriate network cables and then connect one of the ports to your router or access modem. Make sure the LEDs on the switch indicate activity on the ports. The rugged metal housing protects the electronics, provides durability, resistance to electromagnetic interference and efficient heat dissipation, resulting in long and stable operation.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 8 x Gigabit Auto-MDIX PoE / PoE+ ports Provides up to 30 watts for PoE+ Provides up to 15.4 watts for PoE Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
Full-Band 5 and 2.4 GHz Coverage The Rocket®5ac Prism covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket5ac Prism features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Surface mounted data box is designed for use in high-speed data communication networks. Is a passive part structured cabling used in subscriber's points. Socket is equipped with two unshielded RJ-45 ports category 5e. - Two unshielded RJ-45 ports category 5e. - Universal IDC/LSA connectors in accordance with T568A/B. - Allows connection of conductors 26-22 AWG. - Very simple and quick assembly. - Color: white.
