The NanoSwitch N-SW is an outdoor 4-port Gigabit switch with PoE passthrough.Power Strip Simplicity for 24V Devices Simply providing 24V 2-pair input makes NanoSwitch an outdoor 4-port unmanaged switch with "always on" 24V 2-pair output on three ports.PoE Passthrough PoE In - RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch. PoE Out - RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output. Designed for Outdoor Durability The NanoSwitch features an outdoor weatherproof form factor.Operating Temperature: -30 to 70° C (-22 to 158° F)
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz
Tüüp: Kommutaator (Switch); Side tüüp: 10 / 100 / 1000 Mbps; Printserver: Ei; Juhtmevaba side standardid: Ei; SIM-kaardi pesa olemasolu: Ei; Liides LAN (RJ-45): On; USB 2.0 liides: microUSB; WAN-port liides: Ei; Portide arv: LAN x 24, SFP+ x 4;...
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
NETGEAR 300 Series Gigabit Ethernet Unmanaged Switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to GS316, GS324 or GS348 directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion.
wAP LTE kit is a tiny weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on the tightest budget possible. It features an Ethernet port with passive PoE-in, but there are more ways to power this affordable access point: there’s also a standard DC jack and an automotive plug. The new revision features a new LTE modem that offers improved connectivity, the addition of the popular B28 band, and a massive price drop! wAP LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP attracts less attention and blends into any environment.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
4G and Wi‑Fi 6 connectivity The industrial Teltonika RUTC41 router combines mobile 4G LTE Cat 4 with dual-band Wi‑Fi 6, making it ideal where stable network access and fast handling of many devices matter. Maximum WLAN speed of up to 2402 Mb/s on the 5 GHz band supports smooth operation of office systems, IoT devices and industrial installations. Key advantages >4G LTE Cat 4 – provides a mobile network connection in locations without fixed wired internet. >Dual-band Wi‑Fi 6 – supports a larger number of devices with better wireless network stability. >2402 Mb/s on 5 GHz – reduces data transfer time and improves network usability. >Docker – enables containerised applications to run without an additional computer. >1 GB RAM and 1.3 GHz dual-core processor – maintain smooth operation during demanding tasks. >Automatic SIM switching – maintains connectivity continuity if there are problems with one card or the operator’s network. Edge performance The combination of 1 GB RAM and a 1.3 GHz processor provides enough power for local data processing, event logging and edge services. This configuration reduces the need to move some tasks to an external server, which speeds up system response and simplifies deployment in the field. Docker and RutOS The router runs on RutOS and supports Docker, so you can run your own services without expanding the installation with a separate industrial computer. This is a convenient solution for deployments where quick configuration, remote management and the ability to expand the device’s functions as project needs grow are important. Stable local network The model offers 5 Gigabit Ethernet RJ-45 ports and Ethernet WAN support, making it easier to build a wired infrastructure for cameras, terminals, controllers and access points. In addition, support for QoS, load balancing, DHCP and static routes organises network traffic and keeps services operating predictably. Connection security RUTC41 supports a firewall, DMZ, MAC and IP address filtering, and protection against DDoS, increasing control over traffic in the company network. Authentication mechanisms are also available, such as digital certificates, X.509, TACACS+ and Radius, making the device better suited to environments with higher security requirements. Operation in harsh conditions The industrial router operates in temperatures from -40 to 75°C and humidity of 10-90%, so it is suitable for use in control cabinets, warehouses and technical facilities. The black housing and external SMA antennas make installation easier and help adapt coverage to the installation conditions.
