Võrguseadmed

PL7400 is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL7400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a 100Mbit (max) connection without needing to install any LAN cables.Comes with Type C power plug (commonly used in Europe, South America and Asia)IMPORTANT!To enable PWR-LINE functionality, MikroTik device will need to have RouterOS v6.44 or newer software version installed. Please note that PWR devices must be connected via the same electrical phase circuit.Supported deviceshAP lite (RB941-2nD), hAP lite tower (RB941-2nD-TC), hAP mini (RB931-2nD), mAP (RBmAP2nD) and mAP lite (RBmAPL-2nD). The device is also fully compatible with our PWR-LINE AP devices.How it workThe PWR-LINE is a replacement power adapter for your microUSB powered MikroTik router. It’s compatible with all the latest microUSB powered devices made by MikroTik, a simple software upgrade to v6.44+ enables this feature (supported by the mentioned devices with serial numbers that ends with /9xx. PWR-LINE functionality is also supported by some of previously manufactured units - if you have unit with serial number that ends with /8xx , upgrade to 6.44 and see if PWR-LINE interface shows up). Simply take away the old microUSB power adapter, and replace it with the PWR-LINE adapter. The device is still powered from USB, but now it gains a new Ethernet interface, which works over the electrical grid. Connect another PWR-LINE device somewhere in your apartment, and the devices will be joined together, allowing you to extend wireless coverage, or simply ease connectivity between different rooms, without requiring you to lay any cabling.

QNAP QWA-AC2600. Sisemine, Ühenduvustehnoloogia: Juhtmevaba, Hostiliides: PCI-E, Liides: WLAN. Andmeedastuskiirus (maksimaalne): 1733 Mbit/s. Wi-Fi standard: IEEE 802.11ac, Wi-Fi laineala: Kaks sagedusala (2,4 GHz / 5 GHz). ...

Converts Modbus, or EtherNet/IP to PROFINET Supports PROFINET IO device Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports EtherNet/IP Adapter Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs Status monitoring and fault protection for easy maintenance Serial port with 2 kV isolation protection -40 to 75°C wide operating temperature models available Supports redundant dual DC power inputs and 1 relay output Security features based on IEC 62443 Introduction The MGate 5103 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices. Easy Configuration via Web Console The MGate 5103 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5103 Series also supports a GSDML export function. GSDML files can be imported into PROFINET PLCs to save time on PLC configuration. Modbus RTU/ASCII/TCP Protocol Traffic Monitor MGate 5103 gateways support Modbus RTU/ASCII/TCP Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave IDs and register addresses, that were entered incorrectly, or an incorrect command configuration. With Modbus RTU/ASCII/TCP Protocol Traffic Monitor, you can check the captured data and easily identify the root cause. Maintenance Functions MGate 5103 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators.

ATEN KL1516AIN-AXA-AG ALTUSEN KVM 16-por

Tootja: DIGITUS Tootegrupp: KVM consoles Ekraani diagonaal: 17 tolli maksimaalne image resolutsioon: 1280 x 1024 pikslit Supported klaviatuur/Hiir/display ports: 2 x USB KVM kaabli pikkus: 1.8 m Netokaal: 19.15 kg Lisaandmed: TFT monitor 43.2 cm (17"), koos anti-reflective, break-proof protective glass, screen, resolutsioon Lisainfo: https://www.assmann.com/produkte

DIGITUS Console 19" LCD with touchpad KVM 16-port 1U with cables US keyboard

RJ45 jätkupesa

ATEN 8-pordiga Short Depth PS/2-USB VGA Single Rail laiekraan LCD KVM Switch 18,5'

Zealtron Inspektsioonikaamera Endoskoop topeltobjektiiviga 4,3 1080p Hd 5m

Waterproof outdoor SIM card slot adapter dedicated to all Teltonika Routers.

LHG LTE6 kitGreat solution for great distances. The LHG LTE6 kit is a device for very remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, and connect even where cell phones fail. Due to its large sized high gain antenna, LHG LTE6 kit can connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available. The new LHG LTE6 kit features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

AF11-Complete-HB airFiber 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market that breaks free from the congested 5 GHz band. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications. Features: -Full duplex point-to-point radio-11 GHz frequency operation-Up to 1.2+ Gbps throughput-Includes one high-band duplexer for SISO mode (MIMO mode requires an optional second duplexer)-Integrates with AF-11G35 11 GHz antenna-Supports separate TX/RX frequencies-Accepts PoE or DC power Works with UNMS Network Controller: -Manage your networks from a single control plane-Intuitive and robust configuration, control and monitoring-Remote firmware upgrade-Automatic client shaping-Customer billing

Technical features: Packing length: 305±1.5m/80±0.5m, Sheath Thickness: 0.50±0.05 mm Other features: 0.45mm, 305m Producer product name: DS-1LN5E-E/E Type: Cat 5E, U/UTP Packing quantity: 1 pc(s) Gross weight: 8.3 kg Gross depth (mm): 350 mm Gross width (mm): 350 mm Gross height (mm): 200 mm Volume (m3): 0.0245 m³ Net weight: 7.3 kg Tare weight (kg): 1 kg Embeeded battery: No WEEE tax: No

DIGITUS DK-1512-070/R DIGITUS Premium CAT 5e UTP patch cable, Length 7,0 m, Color red