Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Netgear 10 Gigabit SR SFP+ Module. Andmete edastamise maksimaalne määr: 10000 Mbit/s, Kaabeldustehnoloogia: 10Gbase-SR. Ühenduvustehnoloogia: Juhtmega ühendatud. Maksimaalne ülekandekaugus: 300 m. Liides: LC
HGO-antenna-OUTDual-band screw-on outdoor antennaDual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Schutzkontakt-Steckdosenleiste, mit fünf Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, diverse Montageoptionen, Stecksystem DE (Stecker-Typ F)
For extra network coverage (up to 3-4 km in the line of sight) Mikrotik suggest adding an external 8dBi Omni antenna — the TOF-2400-8V-4. If necessary this antenna can be used for any 2.4 GHz device. Not only it works with the 2.4 GHz LoRa® connectivity it also supports the regular 2.4 GHz WLAN. It comes with a 1 m long SMA cable and a mechanical holder for quick and easy mast attachment — when you need that extra network coverage. Compact size and increased durability without sacrificing the power — this antenna will get the job done.
Industrial-grade Ethernet cable that protects your network from elemental and electrostatic damage.The UISP-Cable-Carrier is a Category 5e cable that delivers multilayered elemental protection with a primary braid shield and a weatherproof jacket that prevents damage from rain snow and other harsh climatic conditions. The cable is also equipped with a drain wire and internal foil shielding to protect it from electrostatic discharge (ESD) and its anti-crosstalk divider preserves signal integrity allowing the cable to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
24-portiline Gigabit Switch, mudel TEG-S25, pakub suurt ribalaiust, kasutusmugavust ja usaldusväärsust. Suurendage kontorivõrgu tõhusust ja kõrvaldage võrgu ülekoormus tänu gigabiti kiirusele ja 48 Gbps koguvõimsusele täisdupleksrežiimiga. Sisseehitatud universaalne toiteallikas vähendab kaablihäiret ja diagnostilised LEDid aitavad võrgu tõrkeotsingutel. Ühendage ja mängige see tugev metallist lüliti usaldusväärse kiire võrguühenduse jaoks. Gigabiti kiirused Gigabiti pordid pakuvad kiiret võrguühendust 24 seadmele ja 48 Gbit/s kommutatsioonivõimsus võimaldab andmeliikluse sujuvat liikumist, vähendades liikluse kitsaskohti. Rackmount-konstruktsioon Tänu tugevale metallkorpusele ja kaasasolevatele rackmount-kinnitustele sobib see kommutaator hästi 19-tollise 1U racki paigaldamiseks. Ventilaatorita Ventilaatorita disain vähendab energiatarbimist ja häirivat töömüra. Plug and Play Lihtsalt lülitage lüliti sisse ja ühendage ühendatud seadmed. Pordid 24 x Gigabit Ethernet-porti Lülitusvõimsus 48 Gbps kommutatsioonivõimsus Rackmount-konstruktsioon Tänu tugevale metallkorpusele ja kaasasolevatele rackmount-kinnitustele sobib see kommutaator hästi 19" 1U rack-installatsiooniks. Jumbo Frame Saadab suuremaid pakette ehk Jumbo raame (kuni 9KB), et suurendada jõudlust. Ventilaatorita Ventilaatorita disain vähendab energiatarbimist ja välistab töömüra LED-indikaatorid LED-id annavad teavet toite-, link- ja aktiivsusnäitajate kohta Sisemine toiteallikas 100~240VAC, 50/60Hz sisemine universaalne lülitatav toiteallikas
Patchcord cat.6 UTP 0.25M 10-pack fluke passed blu Conductor thickness: 26AWG (7 x 0.16mm) Outer diameter: 5.4mm +/- 0.2mm Material: conductors-CCA, sheath-PVC Maximum operating frequency: up to 250 MHz Maximum data transmission speed: up to 10 Gb/s Compatible with ANSI/TIA/EIA-568-B standards Product complies with the requirements of IS0/IEC 11801 class D
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Original part number PP6U-5M/B Product name Gembird UTP Cat6 Patch cord, 5 m, blue Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Blue
The Mikrotik RouterBoard M11 is a fully featured RouterBOARD device perfect for using with your own enclosure or building a custom solution. It uses the same square PCB and mounting holes as it’s predecessors, you can simply swap out the older models with the brand new M11. The Mikrotik RouterBoard M11 features a new MediaTek dual core CPU running at 880MHz, a miniPCIe slot for using with a WiFi module of your choice, or with a 3G/ LTE modem (SIM slot provided). The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack.
0.5m Cat.6 U/UTP Network Cable, White. Cat.6 U/UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
