Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 3 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
Seda Delocki SAS-kaablit saab kasutada Mini SAS HD SFF-8644 pistikuga väliste ketaste ühendamiseks Mini SAS HD SFF-8644 pistikuga kontrolleriga. Spetsifikatsioon - Liitmikud: 1 x Mini SAS HD SFF-8644 isane > 1 x Mini SAS HD SFF-8644 isasühendus - Serial Attached SCSI (SAS) spetsifikatsioon - Kaabli gabariit: 28 AWG - Andmeedastuskiirus kuni 12 Gb/s - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Vaba Mini SAS HD-liides Pakendi sisu - Mini SAS HD kaabel
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.5 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.50 mm (with tilt joint) ca. 199.20 mm (without tilt joint) • Diameter: ca. 19.70 mm (top) ca. 21.50 mm (max.) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
Habotest HT118E Universal Digital Multimeter True RMS NCVThe Habotest HT118E is a versatile digital multimeter that supports up to 20,000 counts and offers precise measurements of AC/DC voltage, current, resistance, capacitance, frequency and temperature (-20°C to 1000°C). A True RMS function ensures accurate readings, and non-contact voltage detection (NCV) enhances operational safety. A large LCD display with backlight, LED flashlight, automatic range selection, and built-in stand provide comfort in all conditions.Wide range of measurementsThe HT118E multimeter offers measurement of AC/DC voltage up to 1000V, current up to 10A, resistance up to 100MΩ, capacitance up to 2mF and frequency up to 20MHz. The ability to test diodes, check circuit continuity, and measure minimum and maximum values makes it an extremely functional tool for electronics engineers, electricians and do-it-yourselfers.NCV and Live Test functionWith non-contact voltage detection (NCV), you can check the presence of voltage in wires without physical contact. Live Test allows you to quickly detect a live wire, and a built-in audible and light alarm signals the danger.Backlit screen and result memoryThe HT118E features an easy-to-read, 2.7-inch LCD display with dual backlighting that automatically turns orange when 80V or 1A is exceeded, warning of high voltage. A data storage function saves measurement results, and a dynamic bar graph makes analysis easy.Durability and safetyA double fuse protects both the multimeter and the electrical system under test. The housing with protective silicone covering protects against mechanical damage and electric shock. CAT III 1000V and CAT IV 600V safety certifications ensure that the multimeter can be used even at high voltages.Practical solutionsThe built-in LED flashlight allows work in dark rooms, and the stable stand allows comfortable use without holding the meter in your hand. Flexible cable extrusions help keep the work area tidy. Power is provided by 2 AA batteries (included), and an automatic shut-off function after 15 minutes extends the operating time.Included:Habotest HT118E True RMS NCV digital multimeterMeasurement cable x2 (red and black)Thermocouple for temperature measurementAA battery x2Protective cover ManufacturerHabotestManufacturer codeHT118EDC voltage200mV / 2V / 20V / 200V / 1000VAC voltage200mV / 2V / 20V / 200V / 750VDC current200μA / 2000μA / 20mA / 200mA / 10AAC current200μA / 2000μA / 20mA / 200mA / 10AResistance200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ / 100MΩCapacitance20nF / 200nF / 2μF / 20μF / 200μF / 2mFFrequency200Hz / 2kHz / 20kHz / 200kHz / 2MHz / 20MHzTemperature rangefrom -20°C to 1000°CSampling frequency~3 times/secondNumber of counts20 000Display2.7" LCDDual backlightyesLive Test (live wire test)yes, audible and light alarmNon-contact voltage detection (NCV)yes, audible and light alarmDiode testingyesMax/min value measurementyesData storageyesTrue RMyesFrequency response1kHzAutomatic shutdownyesLow battery indicatoryesActive jack indicatoryesLED flashlightyesPower supply2x AA batteryHousing materialABS with silicone protective coverSafety standardsEN61010-1, -2-030, EN61010-2-033, EN61326-1, CAT III 1000V, CAT IV 600V
To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
