wAP LR2 kit Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.
See Delocki PCI Express kaart laiendab arvutit kahe välise FireWire 800 pordi ja ühe välise FireWire 400 pordi võrra. Selle kaardiga saab ühendada erinevaid FireWire seadmeid, näiteks välise korpuse, digikaamera, videokaamera, adapteri jne. Spetsifikatsioon Ühendus: väline: 2 x FireWire 1394B 9-poldiline emasliitmik 1 x FireWire 1394A 6-poldiline emasliitmik sisemine: 1 x PCI Express x1 1 x 4-poldiline toitepistik: 1 x 4-poldiline toitepistik Kiibistik: Texas Instruments Andmeedastuskiirus: FireWire A kuni 400 Mb/s FireWire B kuni 800 Mb/s Toetab OHCI spetsifikatsiooni V1.0 ja 1.1 Hot Swap, Plug & Play Süsteeminõuded Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 2.6.x / Kernel 4.x.x.x Arvuti, millel on üks vaba PCI Express pesa Toiteallikas vaba 4-poolse toitepistikuga Pakendi sisu PCI Express kaart 1 x kaabel FireWire A 6-poolne isane FireWire A 4-poolne isane, pikkus ca. 150 cm Kasutusjuhend
Description This high-quality heat shrink tube set by Delock is used to protect and to insulate cables, electrical tubes or wires. Under the effect of heat, the sleeve completely encloses the cable and shrinks. This protects the cable from the effects of the influence of weather and mechanical damage. Choice of different sizes and shrink rates This set contains hoses with four different diameters, two different lengths, two different colors and two different shrink rates that can be used in many different ways. Practical storage box The handy box is ideal for protecting the shrink tubes, keeping it free of dirt and dust. The box can also be reused to store various tool accessories, such as screws, nuts, etc. Multifunctional application The heat shrink tubes can be used e.g. in a workshop, at home or in the industry. Application of shrink tubes The heat shrink tube can be heated with a hot air gun, the hose shrinks to half its original diameter when heated at a 2:1 shrinkage ratio and to a quarter of its original diameter at a 4:1 shrinkage ratio. Specification • Content: Shrinkage ratio 2:1: 100 x diameter 3.0 mm red, length: ca. 50 mm 100 x diameter 3.0 mm black, length: ca. 50 mm 50 x diameter 6.0 mm red, length: ca. 50 mm 50 x diameter 6.0 mm black, length: ca. 50 mm 60 x diameter 13.0 mm red, length: ca. 50 mm 60 x diameter 13.0 mm black, length: ca. 50 mm 30 x diameter 25.0 mm red, length: ca. 50 mm 30 x diameter 25.0 mm black, length: ca. 50 mm Shrinkage ratio 4:1: 20 x diameter 25.0 mm red, length: ca. 100 mm 20 x diameter 25.0 mm black, length: ca. 100 mm • Shrinking temperature: 70 °C ~ 125 °C • Material: polyethylene • Box dimensions (LxWxH): ca. 300 x 200 x 63 mm Package content • Heat shrink tube box Package • Box
Seda Delocki USB 2.0 kaablit saab ühendada aktiivsesse USB-porti ja see võimaldab 5 m pikkust pikendust. 5 m pikkuste lisakaablite ühendamisega saate USB-porti pikendada kuni 25 m kaugusele. Spetsifikatsioon Pistikud: 1 x USB 2.0 Type-A isane > 1 x USB 2.0 Type-A emane Kiibistik: FE 1.1 Ühendamiseks aktiivse USB-pordi külge Kaabli mõõtmed: Kaabli mõõtmed: 28 AWG andmeliin 22 AWG toiteliin Pikendus kuni 5 x 5 m kaablitele Ühendused: kullatud Võimsus: kuni max. 500 mA Kaabli pikkus: ca 5 m Süsteeminõuded Linuxi tuum 3.2 või uuem Mac OS 10.9 või uuem Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba aktiivne USB A-tüüpi port Pakendi sisu USB 2.0 pikenduskaabel 5 m
"Qoltec 57037 4G LTE ümbersuunatud antenn DUAL | 5dBi | Väliantenn on vastupidav ja mitmekülgne antenn, mis on mõeldud 4G LTE signaali kvaliteedi ja tugevuse parandamiseks. Tänu oma kõikehõlmavale võimekusele on see antenn ideaalne välitingimustes kasutamiseks, pakkudes täielikku katvust ja suurepärast ühenduvust teie seadmetele, olenemata sellest, kas olete eemal või soovite suurendada signaali vastuvõttu keerulises keskkonnas. 5 dBi võimendus tagab suure signaali võimenduse, mille tulemuseks on suurem andmeedastuskiirus ja suurem ühenduse usaldusväärsus. Kahehäälne seadistus võimaldab samaaegset ühendust mitme seadme või võrguga, optimeerides jõudlust nii tööstuslikuks kui ka isiklikuks kasutamiseks. Välitingimustele vastupidavaks kavandatud antenn on ehitatud vastupidavasse, karmi ilmastikukindlasse konstruktsiooni, mis tagab vastupidavuse ja püsiva jõudluse. Antenni on lihtne paigaldada, sest kaasas on kõik vajalikud paigaldusvahendid ja üksikasjalikud juhised, mistõttu on seda lihtne paigaldada ka minimaalsete tehniliste teadmistega inimestele. Parandage oma traadita seadistust Qoltec 57037 abil ja nautige stabiilset, kiiret internetiühendust, mis vastab teie praegustele ja tulevastele digitaalsetele vajadustele.
MS108GP 8-Port Gigabit Desktop Switch with 7-Port PoE+ - Full Gigabit Ports: 8× 10/100/1000 Mbps RJ45 ports - Two Cables in One: With 7 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort
24-Port Multi-Gigabit (2.5G) Ultra60 PoE++ Smart Ethernet Switch with 4 SFP+ Ports 24 Multi-Gigabit 1G/2.5G ports with 4 10G SFP+ ports 24 Ultra60 PoE++ ports with uninterrupted PoE High power 720W budget PoE Energy-efficient Ethernet ensures maximum energy savings Quiet operation on a desk or on a rack Configurable Layer 2 network functions NETGEAR Insight Remote Cloud Management
Dual Band Wi-Fi 6 PoE Access Point AX3600 DAP-X2850 Managed by Nuclias Connect Next generation - Wi-Fi 6 Dual ranges, 4x4 MIMO, band steering, airtime fairness 2.5 gigabit uplink Free app and software Convenient installation with PoE Designed for Internet of Things devices Business class Wi-Fi 6. The Wi-Fi 6-enabled DAP-X2850 provides businesses of all sizes with fast multi-gigabit connections, significantly increased capacity, interference-free coverage, and one-stop management. It's the perfect solution for SMEs, retailers, hotels, campus networks and service providers who need to keep data flowing, even in high-traffic environments. Easy management of your company network. DAP-X2850 works with Nuclias Connect. It is a software-based management platform (with optional hardware controller) that can be used on-premises or in a public cloud service. Administrative tasks that can be conveniently and quickly performed via the Nuclias Connect app or software enable easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation -Wi-Fi 6 Greater network performance and lower latency, with nearly four times the capacity of previous Wi-Fi standards 2.5 Gigabit uplinks 2 LAN ports (2.5G/1G) ensure efficient operation of the cable network, which eliminates bottlenecks at the access point Free software and app Quickly configure, manage and monitor access points locally with the free management tool or remotely with the Nucliast Connect app Flexible deployment with PoE Power over Ethernet (802.3at) support simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. Security and performance Superior throughput with 4x4 MIMO, dual-band band steering and airtime fairness, with intelligent user management using WPA3 wireless encryption More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options that enable delegated access across the network. Deployments, configuration, updates and expansions are possible in multiple locations using an intuitive dashboard. Developed for IoT Target Wake Time (TWT) reduces the power consumption of Wi-Fi 6 and IoT devices. An efficient Wi-Fi 6 network that speeds up your company's processes. DAP-X2850, thanks to connections with speeds up to 3600 Mb/s in the Wi-Fi 6 802.11ax standard, enables the transfer of large data and streaming video of the highest quality, even in environments with high connection density. Wi-Fi 6 delivers faster network performance and lower latency, with nearly four times the capacity of previous Wi-Fi standards. Comfort of use thanks to an optimized wireless network. The DAP-X2850 supports band steering, 4x4 MU-MIMO, and beamforming technologies designed to reduce congestion. Load Balancing and Airtime Fairness balance the load between access points. This translates into optimal use of resources and ensures that each device has the best possible connection without burdening the entire network. Many operating modes. DAP-X2850 can be configured according to network requirements and optimize its performance: Access point mode Wireless distribution system (WDS) with an access point WDS/bridge (without AP broadcast) Wireless client Easy installation anywhere. The DAP-X2850 can be mounted on the ceiling, wall or placed on a desk. The built-in PoE function makes it easy to install using an Ethernet cable. This is an ideal solution for extensive installations in places where electrical sockets are not easily accessible. Advanced and tailored local network management. Nuclias is a unified network management tool with affordable scalability, customizable controls, designed to be a solution for any type of business. Effective management of multiple locations. Setting appropriate permission levels for the headquarters and branches and various configurations allows you to easily manage networks in multiple locations. Pre-configuring network devices before sending them to regional offices translates into faster and more efficient deployments. Manage your corporate network like never before. You can manage and control your network with Nuclias Connect from anywhere via an internet connection. Traffic analysis and reports, available through a convenient browser or application interface, provide a variety of information about the network and users. Detailed information from traffic data can be used to create business value, and traffic can be tracked both across the entire network and at the level of a single access point. Quick guest login with Captive Portal. Guests using the network can quickly log in via the captive portal. Providing your email address will not only make your connection available, but will also allow you to use your Facebook or Google account. Additionally, the company gains the opportunity to increase brand awareness and promotion. At the same time, it is a source of detailed information about users, which translates into a better understanding of their customers. Expanding the Wi-Fi network with the company. The financial and technical flexibility provided by Nuclias Connect enables the expansion of a small network to a maximum of 1,000 access points while maintaining an efficient and centralized management system. Nuclias hardware controller The DNH-100 wireless controller provides a cost-effective, turnkey solution and eliminates the need to install and then supervise Nuclias Connect on additional hardware such as a server or computer. It supports up to 100 access points, automatically detects new devices, transfers configurations and provides reliable equipment management. It's simply a Plug & Play solution.
DIGITUS Category 6A U-FTP installation cables are manufactured and tested to the ISO/IEC 11801, TIA/-586-C.2 and EN 50173 Category 6A specifications. Every cord consists of 8 color coded AWG 23 Polyethylene insulated conductors. The conductors are twisted together to form 4 pairs with varying lay lengths. Printing details along the outer sheath includes the brand name and item code.
Patchcord cat.6 FTP 3M 10-pack fluke passed grey Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors-copper, CCA; sheath-PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
The LANCOM XS-5116QF is designed for network efficiency with its features. It supports 4,000 active VLANs and 1,024 tagged VLANs, optimizing data flow within operations. The device offers versatile interfaces including 12 1 Gigabit / 10 Gigabit SFP+ ports and additional 40 Gigabit QSFP+ uplink/stacking options, ensuring connectivity across various network demands. Its management protocols, such as SNMP and RMON, provide effective remote management capabilities for easy monitoring and control. Built with front to back airflow, this switch ensures cooling even in high-temperature environments, suitable for a wide range of installations. Operating within a temperature range from 0°C to 40°C and humidity levels of 10-90% non-condensing, the LANCOM XS-5116QF is engineered for durability. The inclusion of a rack mounting kit and its hot-swappable fans allow for easy integration into existing setups without downtime. Networking features like IGMP snooping and multicast storm control ensure that data is managed efficiently, providing a stable network experience. This switch prioritizes performance, scalability, and security, making it a solid choice for networking needs.
24x1G PoE+ managed switch (648w base, up to 720w) and 4xSFP+ 24 Gigabit PoE+ ports with 4 10GBASE-X SFP+ uplinks The internal 880W power supply provides 648W of PoE budget One socket for modular power supply (1+1 redundancy and/or EPS share) Any APS350Wv1, APS600Wv2, APS920Wv1 or APS2000Wv1 can be used The PoE budget can reach 720W while the excess PoE budget remains 648W. Stacking virtual enclosures ensures non-stop forwarding (NSF) and error-free failover The Layer 3 feature set includes static, policy-based, and dynamic routing NETGEAR IGMP Plus, AV UI and Enable Controller speed up AV installation NETGEAR ProSAFE Limited Lifetime Hardware Warranty Lifetime next business day hardware replacement service.
Discover the DIGITUS industrial switch, designed to meet the rigorous demands of modern industrial environments. This switch offers a robust 24 Gbps switching capacity and a 17.86 Mpps packet forwarding rate, ensuring high-performance data transmission and efficient network traffic management. With support for IEEE 802.3af/at PoE+ across 8 ports and a generous 185 W PoE budget, it facilitates the deployment of PoE devices, reducing the need for additional power supplies and simplifying installation.Security is paramount, and this switch delivers with advanced features such as RADIUS, SSH, TACACS+, and SSL encryption, alongside Access Control List (ACL) support and Dynamic ARP Inspection (DAI) to protect against unauthorized access and cyber threats. Its comprehensive support for networking standards and protocols, including Quality of Service (QoS) and Link Aggregation Control Protocol (LACP), makes it a versatile choice for various network configurations.Built to last, the switch features an aluminum alloy enclosure and operates without fans, minimizing noise and increasing reliability. Its 6 kV/8 kV ESD protection ensures it can withstand harsh industrial conditions, offering a durable networking solution with an MTBF of 100,000 hours. Whether you're upgrading an existing network or building a new one, the DIGITUS industrial switch is engineered to provide the performance, security, and durability needed for today's industrial applications.
