This cable by Delock is suitable for connecting a USB-C™ monitor with a resolution of up to 4K Ultra HD (3840 x 2160 @ 60 Hz) to a computer with USB-C™ interface and DisplayPort alternate mode support. This active optical cable is particularly thin and can transmit signals without loss over longer distances. Specification • Connectors: 1 x USB Type-C™ male > 1 x USB Type-C™ male • DisplayPort 1.2 specification • Transmission of audio and video signals • Supports DP Alt Mode • Supports no USB data transfer and no USB charging • Fibre optical cable with low signal degradation • Not affected by electromagnetic interference • Cable diameter: ca. 5.4 mm • Contacts gold-plated • Fixed signal direction • Data transfer rate: DisplayPort 1.2 up to 21.6 Gb/s • Resolution up to 3840 x 2160 @ 60 Hz (depending on the system and the connected hardware) • Supports HDR (High Dynamic Range) • Supports HDCP 1.4 and 2.2 • Colour: black • Length incl. connectors: ca. 25 m System requirements • PC or laptop with a free USB Type-C™ port and DisplayPort alternate mode • Monitor with a free USB Type-C™ (DP Alt Mode) interface Package content • USB-C™ video cable
This USB cable by Delock enables the connection between a device with a USB Type-B connector and a PC or a laptop equipped with a free USB Type-C™ port. Specification • Connectors: 1 x USB Type-C™ 2.0 male > 1 x USB 2.0 Type-B male • Cable gauge: 30 AWG data line 24 AWG power line • Host = USB Type-C™; Device = USB Type-B • Resistor: 5.1 kΩ • Output current: up to 3 A • Cable diameter: ca. 3 mm • Data transfer rate up to 480 Mbps • Colour: black • Length incl. connectors (L): ca. 0.5 m System requirements • PC or laptop with a free USB Type-C™ port • Device with USB 2.0 Type-B port Package content • USB 2.0 cable
The Sprinter KN-3710 becomes Keenetic's most affordable Internet center with Wi-Fi 6, taking the place one step above the Speedster. It has the same gigabit power for routing, AX1800 wireless, and VPN applications as the Hopper (KN-3810), plus a convenient router/repeater switch. The dual-core EN7561DU 900MHz processor inherits the best features of the proven MT7621, while providing more efficient hardware offloading of Wi-Fi 6 wireless transmission. The MT7905 dual-band Wi-Fi chip does not include a spectrum analyzer and Bluetooth, but is combined with the same high-performance FEM - the MT7975 module and printed 5-dBi antennas, which have proven themselves well. The Sprinter can easily handle the role of a single or main gigabit router serving VPN, Internet filters, traffic prioritization and, for example, a Wi-Fi system with several access points and repeaters. On the other hand, thanks to the mode switch, the Sprinter can be turned into a Wi-Fi 6 repeater with a single movement, which will perfectly fit into a gigabit seamless Wi-Fi system without additional settings. Sprinter Wireless Router, Available bandwidth 1800 Mbps Mesh, 4x10/100/1000M Number of antennas 4, Included Accessories Power adapter, Ethernet cable, Instructions for use Dimensions 214 x 154 x 33 mm
Keenetic Hero AX1800 Mesh Wi-Fi 6 Router with a 5-Port Gigabit Smart Switch, SFP Combo Port, USB 2.0 and USB 3.0 Ports - Continuous Fast Reliable Internet - Cutting Edge Wi-Fi Coverage - IntelliQoS Traffic Prioritization - Smooth 4K UHD Video Streaming - Cyberthreat Protected & Family Safe - Friendly, Easy to Use Mobile App - Powerful Network Storage & Personal Cloud Hero Wireless Router, Available bandwidth 1800 Mbps Mesh, USB 2.0 USB 3.0, 4x10/100/1000M 1xCombo 10/100/1000M-T/SFP, WPA - Wi-Fi Protected Access WPA2 - Wi-Fi Protected Access, WPA3 Antenna Gain 5 dB, Number of antennas 4 Wireless Frequency Range 2,4 GHz/ 5 GHz, Included Accessories Power adapter, Ethernet cable, Quick start guide Dimensions 214mm x 154mm x 33mm
Versatile PoE CapabilityPowered by 24V passive PoE or a power adapter the EdgeRouter™X features a passive PoE passthrough option* to power an airMAX®device. Gigabit ConnectivityThe EdgeRouter™X provides five independent Gigabit RJ45 ports that are configurable for switchingCarrier-Class ReliabilityThe EdgeRouter™X delivers uptime performance equal to leading carrier or enterprise technology solutions. EdgeOS™ - Advanced UI The intuitive graphical user interface is easy to learn and makes routing features simple to configure and monitor. It includes an integrated Command-Line Interface (CLI) for convenient access to advanced functions.
10/100BaseT(X) (RJ45 pistik) Kompaktne suurus lihtsaks paigaldamiseks QoS toetab kriitiliste andmete töötlemist tiheda liikluse korral IP40-klassile vastav metallkorpus Lai töötemperatuurivahemik -40 kuni 75°C (-T mudelid) EDS-2008-EL seeria tööstuslikel Ethernet-kommutaatoritel on kuni kaheksa 10/100M vaskporti, mis on ideaalsed rakenduste jaoks, mis vajavad lihtsaid tööstuslikke Ethernet-ühendusi. Suurema mitmekülgsuse tagamiseks erinevate tööstusharude rakenduste kasutamisel võimaldab EDS-2008-EL seeria kasutajatel ka teenusekvaliteedi (QoS) funktsiooni ja ringhäälingutormi kaitse (BSP) sisse või välja lülitada välispaneelil asuvate DIP-lülitite abil. Lisaks sellele on EDS-2008-EL-seeria seadmetel vastupidav metallkorpus, mis tagab sobivuse tööstuskeskkondades kasutamiseks, ning valida saab ka kiudoptilisi ühendusi (Multi-mode SC või ST). EDS-2008-EL-seeria seadmetel on 12/24/48 VDC ühekordne toitesisend, DIN-redelile paigaldamine ja kõrgetasemeline EMI/EMC-võime. Lisaks oma kompaktsele suurusele on EDS-2008-EL seeria läbinud 100%-lise sissepõletamistesti, et tagada selle usaldusväärne toimimine pärast kasutuselevõttu. EDS-2008-EL-seeria standardne töötemperatuurivahemik on -10 kuni 60 °C, saadaval on ka laia temperatuurivahemikuga (-40 kuni 75 °C) mudelid.
Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames, allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.
24 x Gigabit PoE+ ports4 x 10G SFP+ slots370W PoE power budgetEasy-to-use web-based management interfaceRemote cloud management with TRENDnet Hive (Additional fee applies)Supports IPv6, LACP, VLAN, QoS, and IGMP/MLD SnoopingIPv4/IPv6 Static Routing supportBandwidth control per portPrivate, Multicast, and Voice VLAN supportSmart Fans128Gbps switching capacityIEEE 802.1p QoS with queue scheduling supportNDAA / TAA compliant (U.S. and Canada only)Lifetime Warranty*TRENDnet's Gigabit Web Smart PoE+ Switch series offers advanced L2+ features with enhanced traffic management controls to meet the evolving demands of SMB networks. This rack mountable IPv6-ready managed switch comes with an intuitive web-based interface. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this a powerful solution for SMB networks. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature.Free up router resources by offloading routing processes to the managed switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch level. The dynamic ARP inspection feature helps protect connected devices from man-in-the-middle attacks by discarding malicious and invalid ARP packets. Take advantage of the available multicast and IGMP/MLD snooping features to optimize IP surveillance system performance, and minimize network traffic. This TRENDnet Web Smart Managed PoE+ Switch also feature 10G SFP+ slots to support long-distance fiber networking applications.Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Web Smart Managed PoE+ Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. With PoE technology, users only need one set of cables to deliver both data and power. With this PoE+ managed switch, network PoE devices such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.Easily manage and configure TRENDnet’s Web Smart PoE+ Managed Switch Series remotely by updating switches to the latest firmware for access to TRENDnet Hive. TRENDnet Hive is a network cloud manager that reduces management time and cost. No additional hardware, server, or personal cloud is required on these cloud managed switches with TRENDnet’s reliable cloud service.10G SFP+ SlotsOffers four dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network.Integration FlexibilityManaged switch features include access control lists, VLAN, IGMP/MLD snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration.PoE PowerA 370W total PoE power budget on the managed PoE+ switch supplies Power over Ethernet devices with up to 30W per port.Hardware DesignProvides gigabit ports for device connections, 10G SFP+ slots for fiber applications, and a 1U 19” rackmount design with brackets includedPoE PowerA 370W total PoE power budget on the managed PoE+ switch supplies Power over Ethernet devices with up to 30W per port10G SFP+ SlotsOffers four dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB networkIPv6 ReadyThis managed PoE+ switch supports IPv6 configuration and IPv6 neighbor discoveryTraffic ManagementManaged switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Multicast VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth managementIPv4/IPv6 Static RoutingOffload routing processes to the managed PoE+ switch by using the L2+ IPv4/IPv6 static routing feature to efficiently route traffic at the switch levelDynamic ARP InspectionDynamic ARP inspection feature helps protect connected devices from man-in-the-middle attacks by discarding malicious and invalid ARP packetsTroubleshootingA convenient cable diagnostic test and traffic statistics aid in network troubleshootingAccess ControlIncludes ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUSMonitoringRMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions
Ühendab võrku kuni neli RS-232/RS-422/RS-485 jadaseadet. Toetab DHCP-d, saab automaatselt IP-aadressi ja küsib IP-aadressi seeriaviisilise seadistusprotokolli kaudu Konfigureerimine veebihalduse või telneti kaudu Automaatne MDI/MDIX, RJ45 port 10/100Mbpsiga Seeriapordi baadikiirus 50bps kuni 921.6Kbps TRENDneti tööstuslik Modbus Gateway, mudel TI-M42, pakub nelja pordi jadaühendust ja kahte kiiret Ethernet-porti kuni 100m (328 ft.) kaugusele, kasutades Cat5e kaablit . See tööstuslik värav võimaldab kasutajatel ühendada võrku neli Modbus jadaseadet. Võrk Kaks kiiret Ethernet-porti kuni 100 m (328 jalga) kaugusele, kasutades Cat5e kaablit. Seeriaühendus Ühendab võrku kuni neli RS-232/RS-422/RS-485 jadaseadet. Tööstuslik disain Kujundatud vastupidava IP30-klassi kaitsega korpus, vastupidavus suurele vibratsioonile ja löökidele, kaitse ESD/EMI/ülepinge eest ning töötab laias töötemperatuurivahemikus -40° - 75° C (-40° - 167° F). Võrk Kaks kiiret Ethernet-porti kuni 100 m (328 jalga) kaugusele, kasutades Cat5e kaablit. Seeriaühendus Ühendab võrku kuni neli RS-232/RS-422/RS-485 jadaseadet. Tööstuslik disain Kujundatud vastupidava IP30 kaitseklassiga korpuse, kõrge vibratsiooni- ja löögikindlusega, ESD/EMI/ülepinge kaitsega ning laia töötemperatuurivahemikuga -40° - 75° C (-40° - 167° F).
