Muudab PCIe pesa 2,5G Ethernet-portiks Toetab 802.1Q VLAN märgistamist Sisaldab standardseid ja madala profiiliga sulgusid Windows® ja Linux® tugi Vastab IEEE 802.3ab ja 802.3bz standarditele Toetab kuni 9KB jumbo raame TRENDneti 2,5GBASE-T PCIe võrguadapter, mudel TEG-25GECTX, muudab vaba PCI Expressi pesa 2,5GBASE-T Ethernet-portiks. 2,5G võrguadapter sisaldab täiustatud funktsioone, nagu jumbokaadri ja VLAN-märgistuse tugi. 2,5G võrguadapter on ühilduv Windows® ja Linux® lauaarvutite disainiga ning sisaldab nii standardseid kui ka madala profiiliga kinnitusi. 2.5G port 2,5G võrguadapter toetab kolme kiirust: 2,5Gbps, 1Gbps ja 100Mbps. Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust. Operatsioonisüsteemid Ühildub Windowsi, Windows Serveri ja Linuxi operatsioonisüsteemidega. 2,5G port 2,5G võrguadapter toetab kolme kiirust: 2,5Gbps, 1Gbps ja 100Mbps. PCI Express Muudab PCIe 2.0 x1 pesa 2,5G Ethernet-portiks. 2,5GBASE-T toetus 2,5GBASE-T spetsifikatsioon (802.3bz) toetab 2,5G kiirusi standardse Cat5e kaabli kaudu kuni 100 m (328 ft.) kaugusele. Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust. VLANi tugi 2,5G võrguadapter koos IEEE 802.1Q märgistatud VLANi toega Sulgudes Toetab enamikku paigaldusi kaasasolevate standard- ja madalprofiililiste kronsteinide abil Operatsioonisüsteemid Ühildub Windowsi, Windows Serveri ja Linuxi operatsioonisüsteemidega LED-indikaatorid LED-indikaatorid edastavad pordi olekut, ühenduskiirust ja aktiivsust
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
See Delocki antenn võimaldab kasutada erinevaid LTE-sagedusalasid nii siseruumides kui ka välistingimustes. See ühildub täielikult GSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth ja LoRa 868 MHz / 915 MHz.SpetsifikatsioonÜhendused: 2 x SMA pistik: 2 x SMA pistikGSM, UMTS, LTE, ZigBee, DECT, Z-Wave, NB-IoT, WLAN, Bluetooth, ISM,LoRa 868 MHz / 915 MHz, MIMOSagedusvahemik:698 - 960 MHz1710 - 2700 MHzAntenni võimendus: 8 dBiImpedants: 50 OhmVSWR: 2,0Polarisatsioon: vertikaalne, horisontaalneHBW horisontaalne kiirteelaius: 75°VBW vertikaalne kiirguslaius: 65°.Kaabli tüüp: RG-58Kaabli pikkus koos pistikutega: ca. 10 mTöötemperatuur: -40 °C ~ 65 °CKorpuse materjal: ABSKaal: ca. 0,7 kgMõõtmed (LxSxK): ca. 23,7 x 22,9 x 5,0 cmMax. Poldi läbimõõt: ca. 5,5 cmSüsteeminõudedSeade kahe vaba SMA-liitmikugaPakendi sisuAntenniPaigaldusmaterjal:Mutter, seibid, kinnitusklamber ja posti kinnitusmaterjal: mutter, seibid, kinnitusklamber ja posti kinnitusklamber
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: Red
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS Industrial Gigabit Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Gigabit Switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit Switch is a flexible, cost-effective solution for the industrial environment.
8 x Fast Ethernet PoE+ porti 200W PoE võimsuse eelarve 1,6 Gbps kommutatsioonivõimsus Kaitsekindel IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba kinnitust ja seinakinnitusklambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-S24052, TI-S24048). TRENDneti tööstuslikel Fast Ethernet PoE+ DIN-riba lülititel on vastupidav IP30-klassi metallist korpus. Need tööstuslikud haldamata PoE+ lülitid on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama nii kõrgetel kui ka madalatel temperatuuridel tööstuskeskkondades -40° - 75° C (-40° - 167° F). Redundantsed toitesisendid koos ülekoormusvoolukaitsega igas tööstuslikus haldamata PoE+ kommutaatoris vähendavad võrgu seisakuid miinimumini. paigaldajad ja integraatorid saavad TRENDneti tööstuslike Fast Ethernet kommutaatorite abil säästa seadmete kulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE-toite ja andmeid ühe pordi kohta olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti, et edastada nii andmeid kui ka toitu tööstuslikust haldamata PoE+-kommutaatorist. Nende haldamata tööstuslike PoE+ kommutaatoritega saate hõlpsasti ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ- ja muid täiustatud IP-kaameraid, VoIP-telefonisüsteeme, IPTV-dekoodereid, juurdepääsukontrolli ja muud. PoE+ võimsus 200 W PoE+ võimsuse eelarve varustab kuni kaheksa Power over Ethernet seadet PoE+ toiteallikaga. Redundantne toide Kaks toitesisendit pakuvad ülekoormusvoolukaitsega redundantset toite ja väljundhäirereleed, mis annavad märku sisendtoite rikke kohta. Tööstuskindel disain Varustatud vastupidava IP30 klassifikatsiooniga korpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F). PoE+ toide Haldamata tööstuslikud PoE+ lülitid annavad igaüks kuni 30 W võimsust pordi kohta ja andmeid ühe Ethernet-kaabli kaudu PoE-seadmetele. Lihtne paigaldus Ei ole vaja konfigureerimist, lihtsalt ühendage PoE+ võrguseadmed tööstusliku haldamata PoE+ kommutaatoriga. Paigaldusriistvara IP30 klassifikatsiooniga metallist korpus koos DIN-riba ja seinakinnituse riistvaraga, mis on lisatud. Redundantne toide Kaks sisendit tagavad üleliigse voolu kaitse (toiteallikas müüakse eraldi, mudel: TI-S24052, TI-S24048). Lai temperatuurivahemik Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) võimaldab paigaldamist tööstuskeskkondades, kus on äärmiselt kuumad või külmad tingimused. Löögi- ja vibratsioonikindlus Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6). Elektromagnetiline vastavus Vastutab 6kV | õhk: 8kV, (IEC 61000-4-4) EFT: võimsus: 2kV | signaal: 2kV, (61000-4-5) ülepinge: Võimsus: 2kV | Signaal: 2kV
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
EXTREMECLOUD IQ : INDOOR WIFI 6 AP, 2X2 RADIOS WITH DUAL 5GHZ AND 1X1GE PORT. INTEGRATED LIGHT/POWER SENSORS & BLE/ZIGBEE. AI/ML GREEN MODE. EXTERNAL ANTENNA SUPPORT. ANTENNAS SOLD SEPARATELY. INCLUDES CONNECT. DOMAIN : REST OF WORLD
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, beleuchteter Fußschalter mit 1,5 m langer Steuerleitung, 2x permanente Steckdosen, 4x schaltbare Steckdosen, Stecksystem DE (Stecker-Typ F)
Features: Extends IR Range Up to 25 m (82 ft) Weather Resistent for Outdoor Use Powered and Controlled by the UniFi Video Camera Compatible with UniFi Video Camera G3 model UVC-G3
Product kirjeldus: HPE Aruba AP-515 (RW) - radio access point seadme tüüp: Radio access point Form Factor: In-ceiling - sisene Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, IEEE 802.11ax Frequency Band: 2.4 GHz, 5 GHz Performance: Maximum data rate (2.4 GHz): 575 Mbps Maximum data rate (5 GHz): 4.8 Gbps Aggregate bandwidth: 5.4 Gbps maht: Wireless clients per Wi-Fi radio: 256 OFDMA units: 16 BSSIDs per radio: 16 OS Required: ArubaOS, InstantOS Power Over Ethernet (PoE) Supported: PoE mõõtmed (WxDxH): 20 cm x 20 cm x 4.6 cm kaal: 810 g Manufacturer Warranty: Limited eluaegne garantii
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
1 x 100/1000BASE-T PoE sisendport 1 x 100/1000BASE-SX/LX SFP-pesa PoE toiteallikaga - toiteadapterit ei ole vaja SFP-pesa mahutab multimoodseid või ühemoodseid mooduleid Toetab Link Fault Pass-Through (LFPT) Jumbo Frame (9KB) toetus TRENDneti Gigabit PoE PD SFP Fiber Media Converter, mudel TFC-PGSFP, teisendab 100/1000BASE-T vask-Etherneti 1000BASE-SX/LX Fiber SFP meediumiks ja vastupidi. TFC-PGSFP saab mugavalt toite PoE-lülitist või injektorist, toiteadapterit ei ole vaja. Sellel on üks gigabitine PoE-sisendport toite- ja andmeside jaoks ning üks SFP-pesa, mis toetab nii multimoodilisi (SX) kui ka ühemoodilisi (LX) SFP-mooduleid. SFP-pesa mahutab nii Fast Ethernet kui ka Gigabit SFP-mooduleid, mis tagab täiendava paigaldamise paindlikkuse. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid multimood- või ühemood-kiudoptiliste rakenduste jaoks. PoE toiteallikaga Ei ole vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 jalga) kaugusele. Kompaktne Väike ja kompaktne metallkorpuse disain tagab suurema paigaldamise paindlikkuse. Pordid 1 x 100/1000BASE-T RJ-45 PoE sisendport, 1 x 100/1000BASE-SX/LX SFP-pesa. PoE toiteallikaga Ei vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 ft.) kaugusele. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust.
Features: High quality imaging with 4 MP resolution Clear imaging against strong backlight due to 120 dB true WDR technology Efficient H.265+ compression technology Water and dust resistant (IP66) and vandal proof (IK10) Built-in microphone for real-time audio security Focus on human and vehicle targets classification based on deep learning
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
Der DMG-31 von PowerOn verbindet Desktops mit einem High-Speed WLAN-Netzwerk. Er ist kompatibel mit den 802.11a/b/g/n (WiFi 4) Standards und erreicht Geschwindigkeiten von bis zu 300 Mbit/s bei 2,4GHz über einen freien PCIe x1 Port. Die zwei leistungsstarken 3dBi Antennen sorgen nicht nur für einen ordentlichen Datendurchsatz, sondern gewährleisten auch eine unterbrechungsfreie Datenübertragen auf größere Distanzen.
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
