DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.* - Mikrotik LtAP mini sold separately!
This unit is a direct upgrade of Mikrotik previous 10G SFP+ 10 km module: more functionality for the same price. Mikrotik has added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
Lenovo GX90X21431. Hostiliides: USB 3.2 Gen 2 (3.1 Gen 2) Type-C, Jaoturi liidesed: USB 3.2 Gen 2 (3.1 Gen 2) Type-A. Andmeedastuskiirus: 20 Mbit/s, Toote värv: Must, Kaabli pikkus: 0,1 m. Laius: 233 mm, Sügavus: 37 mm, Kõrgus: 12 ...
AX300 Nano Wi-Fi 6 Wireless USB Adapter Lightning Speed, Solid Connections - Leveraging Wi-Fi 6 technology, achieve blazing-fast speeds up to 287 Mbps for flawless web browsing, instant email responses, and seamless social media sharing.* Compact and Portable – Nano-sized (0.69×0.62×0.28 in) for lightning-fast wireless — perfect for travel and remote work. Easy to Setup – Comes preloaded with an internal driver for instant connectivity, eliminating tedious processes and allowing for a simple plug-and-perform experience without any hitches. Smoother Online Experience - Works with MU-MIMO routers, which provide simultaneous data streams, boosting throughput and efficiency. Seamless Wi-Fi Hotspot Sharing - Leverage AP Mode to transform your device into a robust Wi-Fi hotspot, conveniently providing fast internet access to numerous connections. Wide Compatibility - Supported operating systems include Windows (11/10/7) and Linux (Kemel 3.10 and later)
Fiber + Power Solution for Outdoor PoE DevicesOvercome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
Dual-Radio Performance Gigabit Speeds The UniFi AC Pro AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. Sleek Ultra-Compact Design The UniFi AC Pro AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP. Scalable Enterprise Wi-Fi Management The UniFi Controller v4 software is a powerful enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
MS106LP 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports Two Cables in One: With four PoE+ ports, transfers data and power on one single cable High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode Isolation Mode: One click to divide traffic for specific ports for stability and security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation and long network life Plug and Play: Simple to use and saves time and effort PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
