To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 4 x Gigabit Auto-MDIX PoE / PoE+ ports 4 x Gigabit Auto-MDIX ports Provides up to 30 watts for PoE+ (2 ports max.) Provides up to 15.4 watts for PoE (4 ports max.) Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
Original part number SG108 Product name Tenda SG108 8-port Ethernet Switch 10/100/1000 Mbps Producer Tenda Class of product SWITCH - unmanaged LAN network architecture GigabitEthernet Number of 1000BaseT (RJ45) ports 8 Pcs Layer switch 2 Type of computer case Desktop Standard accessory 12VDC/1.5A power supply Colour Black
QuSpot for Teltonika RUTX11 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + Bluetooth antenna + place to install Teltonika RUTX11 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX11 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It also has embedded Wi-Fi dualband 2.4 & 5 GHz omni antenna, GPS antenna and Bluetooth antenna. If you use RUTX11 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
16 x Gigabit PoE+ ports 240W PoE power budget 32Gbps switching capacity Hardened IP30 rated metal switch Includes DIN-rail and wall mounts Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm output triggered by power failure Power supply sold separately (models: TI-S24048, TI-S48048) TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. PoE Power A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power. Fault Tolerance The industrial PoE switch features redundant power inputs with output alarm relay. Industrial Design Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration and shock, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). PoE+ Power Budget Supplies up to 30W of PoE/PoE+ power per port on the industrial PoE switch with a 240W PoE power budget Network Ports Industrial PoE switch with 16 Gigabit PoE+ ports DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 32Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / TI-S48048) Alarm Relay Alarm relay triggered by power failure of primary and/or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Extreme Temperatures Industrial PoE switch rated for an operating temperature range of -40 – 75° C (-40 – 167° F) Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point on the industrial PoE switch protects equipment from external electrical surges
Seda USB 3.0-poolse pistikupesa adapterit saab ühendada oma põhiplaadi vabale USB 3.0-poolse pistikupesa isendile, et laiendada oma süsteemi sisemiselt kahe USB 3.0-A pordi võrra. Nii saate ühendada näiteks USB-mälupulga või USB-WLAN-pulga. Kuna USB 3.0-A liides ühildub oma eelkäijatega USB 2.0 ja USB 1.1, saate kasutada oma olemasolevaid USB-seadmeid. Spetsifikatsioon Liitmik: 2 x USB 3.0-A ühendusliides: USB 3.0 pin header 19 pin female > 2 x USB 3.0-A female Otseühenduseks põhiplaadil USB-pordi suund: paralleelne (horisontaalne) Süsteeminõuded Põhiplaat, millel on vaba 19-pooluseline USB 3.0 pistikühendus Pakendi sisu Adapter USB 3.0 viiguga pistikupesa > 2 x USB 3.0 pesa > 2 x USB 3.0 pesa
See Delocki tööriistakomplekt sisaldab kõiki tööriistu võrgukaablite paigaldamiseks: kaabli eemaldaja, pressimistööriist, mulgustamistööriist ja võrgukaabli tester. Käepärases kotis on komplekt turvaline kaasaskandmiseks ja kiirelt kasutusvalmis. Spetsifikatsioon • Võrgukaabli tester RJ45 / RJ12 jaoks koos eemaldatava kaugjuhtimisseadmega • Võrgukaabli tester akupesaga 1 x 9 V aku jaoks (ei kuulu komplekti) • Lõikemehhanismiga stantsimistööriist • Kaabli eemaldaja keerdpaar- ja koaksiaalkaablite jaoks • Kaabli eemaldaja reguleeritav erinevate kaabli läbimõõtude jaoks • RJ45 pistikute pressimistööriist • Kott • Koti mõõdud (PxLxK): ca. 21,5 x 13,0 x 5,0 cm
Seda Delocki pesa kinnitust saab paigaldada arvuti vabasse pessa ja see võimaldab teil ühe sisemise COM-pordi välja viia, et ühendada üks väline jadaport. Spetsifikatsioon - Ühendus: 1 x DB9 välise jadaühendusega - Slot-klamber paigaldamiseks arvutipesasse - Kaabli pikkus: ca 27 cm Süsteeminõuded - Vaba arvutipesaga arvuti - Üks vaba sisemine COM-port Pakendi sisu - Pesa klamber 1 x COM-port
Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Discover the Lindy CAT 8.1 network cable, engineered to meet the demands of high-speed network environments. This patch cable features gold-plated pins and corrosion-resistant copper conductors, ensuring not only longevity but also reliable connectivity for your networking needs. With a tested frequency of up to 2000 MHz, it supports rapid data transmission rates, making it an ideal choice for bandwidth-intensive applications.Safety is paramount, which is why this cable is encased in a Low Smoke Zero Halogen (LSZH) jacket, significantly reducing the emission of toxic fumes in case of fire. Additionally, its snagless design with latch protection and strain relief ensures a secure connection and durability, even in physically demanding situations. Compliant with ISO/IEC 11801, REACH, RoHS, and UL standards, this network cable is a testament to quality and safety.
